Tree Drill/Kill 1oz Undiluted Glyphosate 

Now thats how a RU-vid video should be done. No intro music or channel promotion just straight to the info you want to share. 👍👍👍👍👍 I miss RU-vid before advertising.

this should be an example to all RU-vidrs. No messing around talking about their life goals, and why they called their dog Bojo. Straight facts...no toss

I like this technique because there is no mixing with a carrier. It is good you emphasized safe use. I used a variation of it a couple of years ago to kill a large autumn olive tree in our woods which is an invasive here in the Mid-Atlantic USA. I drill several approximately 1 inch holes per trunk with a 3/8" bit several inches apart and will refill a couple of times using Roundup Super Concentrate (50% glyphosate) applied with a plastic syringe. Doing three more now, started a couple of weeks ago in late April and clearly seeing effects. I prefer large specimens of this particular tree species to be completely dead with no leaves before cutting down and replacing with natives in late summer/early fall. We discovered dozens of sapling size autumn olives had infiltrated our small meadow when we moved in, no doubt as a result of the large ones in the nearby woods border. I just cut off and apply the herbicide to the sapling cut stems.

I've got a nasty overgrown suckers on a palm tree that i'm going to try this on. Very good video, straight to the point, direct, with clear instructions.

Thank you, I’ve two 50ft plus willow trees, whilst they can look beautiful one out front is damaging our house and cars, the one out back blocks light an fills garden and pool with debris resulting in 10 plus bags of debris a week. Both shed a branch this year having both trimmed at a cost of £700 each... After years of hell with these we’ve drilled a few holes 12 inches deep filling them with Gallup 360. Sad to say it’s exciting 👍👍👍 Sod what the tree huggers say, they don’t live with the dangers, damage and extreme maintenance some trees cause

Thanks for showing what happens over time instead of just putting it in and ending the video. Gonna do this because I want to leave some dead trees up for woodpeckers and other wildlife

Many thanks for this , used same product and after 10 days I am starting to see browning of leaves , at this rate ill be raking my yard in August

I use 4 oz of remade herbicide with one gallon diesel oil and it works very well.

I hit trees with it on a weekly basis to really kill it quick. I have a lot of camphour laurel in my property. It is a noxious weed here in Australia.

You are amazing! This is the kind of video we want to see, the before and after! I have 3 blackhaw viburnum trees about 15-18 ft tall. I planted it in 2006. I am extremely disappointed that it created new trees from its spreading roots! SIGH! As of today, I think the number of 2-3ft young shoots/trees I saw were around 70! Damn! Yesterday, I tried manually removing them. It took me 1.5 hrs to remove 5 young 2-3ft trees. The roots are so freaking strong! LOL. Thank you for this technique!

Thanks for the tip. I intend to use your method on an out of place tree in my bakyard. What worries me is the danger of a large dead tree standing, ready to fall and hurt someone. Any ideas will be greatly appreciated.

I have a tree like that and I need it to die also, but it somehow seems sad to see that one die like that; not sure why. I would rather cut mine down and deal with it that way, but it's not convenient right now to do so. I will probably try this method anyway.

Great straightforward video. Thanks

If I use this method on my large rubber tree on my empty lot, will it also kill the roots deep down in the ground?

hello thanks for the tips is possible to inject directly on the roots of the tree after having drilled this one

You still have to cut it down to remove any “widow makers”, so why not cut it down & drill several holes & apply the liquid tree killer?

1st class , straight to the point

Thanks heaps mate will be using this method on neighbor,just need the pricks to go away on holidays if they can afford too

The best video on this matter! Thank you

How’s the inside of the tree if cut down? Is it still the same color as it if would’ve died naturally?

Great video so simple and down to the point! thank you

Your method worked in the spring contrary to what I've read. Maybe because you used a stronger concentration, a larger volume of Glyphosate and applied it deeper into the tree. So, I'm just going to go ahead and try it now instead of waiting until fall. Glad I found you!

I used Glyphosate -71% on Neem tree (hack and squirt method) when the tree was shedding leaves before spring.It was a complete failure. I used it on my neighbors tree because its leaves, branches, flowers were causing nuisance. They did nothing to reduce my discomfort. Now after a month new leaves have grown in all over its branches.

Very effective. Done this for years. Going 5 inches is not necessary. I generally still 3 holes around the tree about 2 inches deep. I know it works on maple, sweet gum, pine, oak, and cherry.

Thanks very much for the video ,could you please answer my question? i have a big white oak tree around 45 inch and maybe 30 feet tall , i made 4 hole on a tree but how many times i need to inject inside the tree?instead of glyphosate i applied roundup Transorb concentrate

Nice content. Keep up bro. 👍🙏🙏

Thanks for this valuable information. Now , I have questions, after kill , so I need to cut tree , or just let it be there ? Thank you sir !

Experts say you should do this in fall/winter. Reason is spring/summer liquid flows upward while fall it goes downward to the roots and kills them

In my country 41% Glyphosate is not available can i use ? others Grash killer for kill a big size tree - with the same procerss ?

Good deal - Have 2 problem trees that are a threat to the house. I like trees but these are going...

Will this method work if i use copper sulfate?...how long before it works?

Can i use this technique to add pesticida to control mealy bug in a 2meters high tree??

Awesome video, I will have to try it…. Thanks for sharing

We have a massive trees in neighbours garden. How many holes do I have to drill?also the depth of the hole since its a huge tree.

Awesome video!

Works like a charm!! I’ve done it several times. Glyphosate is the real deal and what’s really cool is how fast the tree will deteriorate!!! It will be crumbling within the next year verses standing there dead for many years like a normal dead tree.

Planning on trying it out with a giant Ficus (weeping fig) tree in my yard. The roots have damaged my plumbing and costed several thousand to fix. Hope this will deal with it once and for all. Would you suggest repeating the application a few times for a very large tree? Edit: it's about 90 feet tall.

Hello, if I'm not mistaken you only made 1 hole in the video. Did you eventually made followup extra holes, or the single one was enough to kill the tree? Pls, reply/confirm, thanks in advance.

Will it kill roots and when can I pull it out from roots please thnx.

Any suggestions to kill walnut tree without cutting with simple and easy techniques??

Thanks for showing this video. Would like to know if you mix the glyphosate with water before feeding the tree 1oz of it?

I did this before I even looked online to see if it was a thing. I used a regular, thick drill but and drilled 4 downward holes on one side of a black walnut tree and used a dropper to fill the holes with 50% concentrate. After I did it, I was like, let me look online to see if it was a thing lol. And sure enough, hit after hit came back. Your video was listed first I believe. Anyway, within 5 or 6 days after I did it, the side of the tree I did it on was nearly totally defoliated. But the other side of the tree still looks almost normal save for a slight bit of wilting. So will that side of the tree eventually catch up to the other, or will I have to do it on that side of the tree as well? I'd prefer not having to do the other side of possible.

Thanks this actually works I done it to two cottonwood trees works great.

omg ... i just did this today, with only instructions from my council website ... I think I used too much, I was only doing stumps. I hope I haven't poisoned the surrounding ground ... holy shit I feel a bit nauseas ... do you think I have poisoned the surrounding area of the stumps? I have poisoned those ornamental cherry trees.

Ive cut some trees down and they keep sending new shoots back up near the stump. So I bought a small applicator like yours and cut it real close to the ground and then drop 1 or 2 drops on the part I cut and i thought it worked but started noticing new shoots coming up from the ground near the one I killed. Ugh. I also try this on saw briars and same thing happens. I am using the same stuff you are using excpet I bought it at tractor supply. Any suggestions?

I m from india i suggest you after washing your clothes you can also put rough wasted water in roots ...its also chemical

Thanks now we have a better ideal on the atual mix.

Hello, What is the equivalent product that I can apply to kill a tree in the UK, as I see 1 "Grass And Weed Killer 41% Glyphosate Concentrate is available only in the United States? I have checked couple of product like 1.Gallup Home & Garden Glyphosate Commercial Strength Weed killer and 2.Rootblast Super Concentrated Weed Killer Commercial Strength Glyphosate. There is no specific mention of percentage of Glyphosate. Kindly advise. Many Thanks

Thank you!! I will try this!!

I have a large pine tree. I think the diameter is just over 1 meter. Will this kill the tree? Also, will the herbicide ruin the soil? I have other plants around the tree that I don't want to harm.

How to get or where got the concentrate grass weed killer

hello! thanks for the helpful video! quick question - I'd like to use this method to kill a maple tree discretely. I'm looking to do it in the last week in November in Canada. I'm wondering if I time it as such, when it comes spring, will it grow any leaves on the branches? Or will the branches grow these "red/copper" colored leaves indicating that it's been poisoned? Thank you and pray that you answer as I am a little anxious how it's going to turn out.

Hi PeanutButterMan. I would like to ask a few questions to dry 40 years old 6-7 meters tall oleaster tree. - Is the hole diameter and length you opened is sufficient? - How many ml of liquid should be put into the hole you opened? Thanks.

Remember to follow label directions. This technique probably is not on the label being that the container says “grass & weed killer”. Glad your using PPE.

I have a tree of heaven infestation and I was thinking about doing the drill+41% glyphosphate method. I'm happy to see that it works. This is awesome!

How to kill coconut tree without cuting in faster way

How can I get this product in Bangladesh? Please help me

I know trees are very important for us. But sometimes when you have bad neighbor then, your life become hell because of these trees. Let me tell you something. I live in india and there is a big banyan tree near my house and because of that tree we face so many problems like too much humus, and in winters my house become hell because this tree covered my house two sides and as a result we receive very less sunlight. And during autumn this tree shed so many leaves. I have some allergies because of this humus I have talked so many times with my neighbor but he start fighting with me. So now I will do this method...I hope it will work

Will the tree eventually die and wilt away, or are you probably gonna have to cut it down?

Use fresh glyphosate!!! I first used some from a 5 yr old jug that I had got a deal on. The trees were only half dying after several treatments. I then used some from a fresh jug and BAM, those trees were completely brown in no time!! I emailed the company and they said the shelf life is around 5yrs.

Then what the tree is dead and it looks like an eye soar different eye soar from before you killer it. To me this doesn't make sense.

Can I drill in the root instead of the stump? i have a tree in front of my home that needs to go but the village wont remove it unless its dead.

How deep of a hole 6 inches. How many times do you have to full the hole with roundup with 41% Glyphosate.

I use the same method with one exception I drill a hole in the base of the tree or into a root if possible. The tree is dead in a week. I dont even use an oz I think that is alot of concentrate.

Ive done this for years...it works. Its a bit quicker using a 60 cc syringe to draw up the round up......and go buy a long IV needle at a farm store 6 " inches long.... dull the point so you dont poke yourself.....put the needle the full depth into the hole.....otherwise the remaining air in the hole wont allow the Round Up to enter. In larger trees.....say up to 3 ft diameter I will drill three holes evenly spaced around the tree. Allows for a quicker result.......death ! For smaller trees....consider " Pathfinder II " Its a basal treatment 100% effective....also works on multi-floral rose !

I have big oak tree in the back yard I did the same to it and it started dropping it's leaves and turning brown ....I am in Texas which is famous of subterranean termite..I am concerned now after the tree dies Termite could start working on the root which could cause the tree to fall..also I don't know if the top branches will fall first before the root gets weaker..what do you think ?

Please tell me if it working or not... Need help guys

Thanks for the video, really good. But i think trees die quicker if it is done ( drilling ) between october and february when the sap is not rising. Thanks again.

Have you ever killed a giant poplar’s (already cut down) root system with it? TYVM!

This question is going in the exact opposite direction than your video, which was good. Could you aid a pecan tree with zinc sulfate by drilling a hole in its trunk and pouring the solution into it? They say zinc is not absorbed well from the soil and that you should spray the tree leaves with it, but the leaves are just too high for me, even with a 20 foot sprayer. I tried asking the local extension agent, but as usual, he never replies to me. Thanks.

Brother please answer ...i have a big sissoo tree infront of my shop..i use ur method i drill 2 hole in stem and fill glyphosate 41...but after 2 days tree not suck the chemical...i filled 150 ml glypbosate..how much time the tree will die

CAN I USE Spectracide Weed and Grass Killer CONCENTRATE

Going to give this a go, we moved into a 5 year abandoned rental that has aspen fast growing in the hedges, a seed in a few months can reach 2ft and have some thickness to it as well as heavy rooting and it's spreading everywhere. Hopefully this kills off the baby aspens that have planted themselves in flower beds and are extremely difficult to remove.

Plz i need a chemical plz help me

Worked great, thank you so much.

What if i make more holes and pour more glyphosate, would that make it died even quicker?

How did it fall, by girding whole tree fall, how about with glyposate, did the top part fall first going down?

How many holes did you drill I drilled eight holes between the trunk and different roots And I used about 30oz

Does this work on free of Heaven (Ailanthus)? Killing the tree and all associated suckers?

Will that work in the dead of winter? IOW will it then die in the spring? Thank you for this. I had no idea it was that simple!

Question , Do we need to use it daily for just 1 times?

Should I do it on summer only or I can do on fall?

This chemical can be used in tree,then 100% sure in big tree kill?

How much oz of Glyphosate is needed to kill a tree having 2.5 ft in diameter?

Hey buddy. Can the chop and aquire method work. I don't have time for drilling

Is this allowed by the label?

Sir how to kill 10yr old teak tree with out any proofs

Thank you for this video I just order one, I have a big ass tree in front of my house I complain to hoa about it they continue to ignore me so it’s time to do something about it

Bangladesh home delivery can be done

No need to drill deep - the cambium is all that needs to have herbicide exposure. See also "hack and squirt"

Lets say you can't drill or hack the tree as there is a fence, will pouring glyphosate around the tree have an affect?

Sir how are you sir where is your country sir can home delivery be done in bangladesh please tell me

How far up the trunk did you drill the hole? Also, what size spade bit? I did get the glyphosate so I'm all ready to go.

Hello Nice video Please say the trunk diameter

Can this glyphosate injection smoke large western-red-cedar? Trunk diameter about 15".

Excellent video. I got 360g/litre glysophate. Going to try 50/50 solution with water.

Since the chemical is in Roundup, can Roundup be used instead?

do you think it can kill pine trees?

Thank you for this. Can you just use Roundup and this method for the same or similar results?

Sir, you are tha man! Thank you!