Tremec 5-speed to K-Series? Can we make our own adapter?

Подписаться 69 тыс.

Просмотров 19 тыс.

50% 1

Check out Car Dude Garage!
Thanks again brotha for the deal on the parts! 💪
/ @cardudegarage
Follow Braven's RU-vid channel! 💪
/ @itzbraven
Phoenix area!!
Need some lawn services done?
-Maintenance/Clean up
-Sprinkler Install/ Repair
-Trash/Junk removal
-Scheduled Maintenance available!
Hit up the Lawn care service who is EXCLUSIVELY #DBFam approved 💪
JD's Landscaping LLC
On Instagram
jds_azlandscapi...
Or direct line @
(602)292-SIX902
jondaniel141@gmail.com
Make sure and check out MaxpeedingRods!
Enter Dbfam for 10% off!
www.maxpeedingrods.com/catego...
Want to help with the builds?? Follow the links below!
Become a Patreon here
www.patreon.com/user?u=22862832
Buy merch here
deadbeatgarage.myshopify.com/
Send Me Stuff Here
Bravus Jeffries
P.O. Box 23398
Phoenix AZ 85063
Follow me on social media
Facebook
RU-viddeadb...
Instagram
deadbeat_ga...
Built Not Bought group on Facebook (fixed the link)
/ 768216480031651
Thank you all for the love and support you have shown, it is greatly appreciated!
Check out all the links below! Help support the companies that support the channel! #dbfam
MPC Motorsport website! Full of badassery!!
www.mpcmotorsport.com/
MPC Motorsport on Instagram
mpcmotorspo...
Looking for some custom fabrication!? Get ahold of Sic Industries, LLC.
Facebook
/ sic-industries-llc-529...
Email
sicindusrties@hotmail.com
Visit Finish Line Factory for all of your AN line needs!!
Finish Line Factory Website
finishlinefactory.com/
Enter "deadbeatgarage" at checkout to receive 10% OFF!!
Finish Line on Instagram
finishlinef...
Finish Line on Facebook
/ finishlinefactory

Авто/Мото

Опубликовано:

28 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 158

@shiftcartel2921 Год назад

My man said O Kurwa Lmao caught me off guard had to go back

@ryanlott6309 Год назад

There is a local guy who just did a Colorado with a k series turbo. Just was on they Dyno to just shy of 500hp. It appears to be a Colorado trans likely with the fab bots adapter. They have the ar5 to ls Bell housing which is a direct swap onto the Colorado ar5 then use the k to ls plate. The ar5 can actually hold decent power and are an inexpensive option. Look up Larry's garage. He has some shorts here on RU-vid.

@randysaengalam7560 Год назад

@mikesgarage2907 Год назад

Really like the way content is going out now, everyday 100% good luck with all your projects 👍

@victorwilks88 Год назад

Love the dad and son combo 💙

@MosaicArtizt Год назад

I def got faith in your skills and can’t wait to see how you pull this off

@danielramsay2680 Год назад

I would try swapping the bellhousing too one that you know has an adapter plate as long as input shaft will still work

@FinessedIt Год назад

As always 🔥 content !

@evelynsalazar6057 Год назад

Wow that's so smart and your build is so excited for letting us know how to do it thank you for being able to help us with your build and God bless you and your family and friends please stay safe out there ☺️💗🙂💯👑🔥🔥⭐

@DrDr1v1 Год назад

Bro fr props to the way u work bro 💯

@Anthony-fc1zb Год назад

No lie I got faith in your skills brother. Shit won't be easy but where's the fun in that right? Also having one you can buy is so much easier though. Either way the build is gonna be sick.

@hondaccord2 Год назад

the fact that you are just trying that is super dope I think you can do it and you should go for it

@Stewie23456 Год назад

I keep hearing you slip in them random polish words 🤣 love it man. U polish by chance? Lmao

@tannersgarage4457 Год назад

I’d prolly just use a S2k transmission, if I could find one for a decent price 🤔

@brianfougere1732 Месяц назад

Keep going ,you will get it

@andresacosta4643 Год назад

FABBOT FABRICATIONS - K20 / K24 TO LS TRANSMISSION ADAPTER

@GrittyPhi Год назад

"i know i'm good" was mad funny to me lol

@ShowtymeDesignz Год назад

Damn, the nut kicker is that both starter locations are partially covered, pretty much a no go, the adapter process will cost a good amount plus the custom flywheel. It will be bout the same as a full setup

@icocortez2215 Год назад

Keep going fam ,you can fill the starter gaps and relocate it ,you got this💪👨‍🔬👨‍🏭

@icocortez2215 Год назад

Check out "Jimmy O" channel get an idea how he dose it and what trannies you can use.

@professionalpileoffuckings5110 Год назад

6:03 PHAHAHAHAHAHA Your mom needs to be painted :D PHAHAHAH. I love you guys!!

@williammercer6765 Год назад

Just remember that you can cut the transmission bell housing so you put the starter on the motor side

@Its_A_LiFeStyle Год назад

The FABbot K20-k24 to Powerglide, Th400, 4l80, 4l60e, t56, ar5, and tr6060 & they on sale right now if you didnt know Keep up the work bro ✌🏻

@deadbeatgarage Год назад

I know! Dude that plate is so bad ass.. I want one bad! Haha.

@Its_A_LiFeStyle Год назад

@@deadbeatgarage yea billet parts are 🔥 sucks they won’t sponsor you

@Its_A_LiFeStyle Год назад

@@deadbeatgarage another option is K power industries sell K to Miata trans 90-05 5speed & 6speed , K to E30,E36.E46 trans & K to 86 trans plus they half the price of FABbot’s adapter

@adriancandelaria531 Год назад

right before you said it i was thinking you could possibly swap the bell housing. maybe theres one from a more common swap that fits your trans and also has adapter plates available for the k series.

@CraaaigV302 Год назад

The opening for the starter on the trans won't matter ur gonna want to use the k series starter so ud need a adapter flywheel thats kseries but will accept the clutch that the trans uses

@riveraunderground Год назад

Bro try looking into a Honda S2000 6 speed transmission. They have alot of aftermarket adapter plates and clutches for k series 😎

@Op1zilla Год назад

That's sum real tinkering, keep trying until u get tired of it or save some skrilla an buy 1, ggz-👽👍

@GlassWerx Год назад

Good stuff

@_Rawwr_3 Год назад

I think you can do it dude!

@akktiveautosports Год назад

Bill Hincher is the guy you need to talk to. He can make any engine fit to any transmission with the adapter plates and flywheel spacer and starter combo. I've called him many times for advice and technical help. He knows how to get it done.

@chillininidahonhborn5106 Год назад

That t5 needs some new input shaft bearings, it should wiggle like it did..... right at 9:30 to 9:35

@joshdane5657 Год назад

Yea that was some serious movement in the input shaft lol. I was wondering if any body else noticed that.

@ChutneyInc. Год назад

Oh snap almost at 60k

@geewilikersbatman9930 Год назад

Check your input shaft size to see if they are even compatible.

@Jason-nk4yr Год назад

Just get different bell housing. Borg Warner trans have tons of options out there

@carlosnombre2028 Год назад

If the bell housings can be change out to have the starter on the left for the k serie motor

@chylodavis7573 Год назад

You could mount the starter remotely also. Or like a racebike starter

@smoothoperator4777 Год назад

I would probably go with just trying to get a regular T5 bell housing

@deadbeatgarage Год назад

Yeah I haven't even searched for one yet but it would probably be the easiest option

@GlassWerx Год назад

You also need to make sure what clutch u use will work with the flywheel of the k series. As well as the input shaft has to have the same spline count as the crank.

@sahzhree7757 5 месяцев назад

Crankshafts don't have splines, clutch pack will need to have matching splines, which isn't a problem if he's using the clutch that came with the transmission.

@sbeezy562 Год назад

gonna be alot of fabrications and also gotta make sure if k series clutch will work with the transmission bro but great upload deadbeat fam!!

@oscardanielflores4376 Год назад

🔥🔥🔥

@ErickBonilla123 Год назад

Cut the transmission housing and weld a piece back on to create space where the starter is on the block location.. or use an s2000 transmission which already have adapter plates and clutch solutions by different companies like inline pro.

@ShangiansGarage Год назад

I wonder if you can switch the bell housing out on that transmission for a ls one🤔

@loudaagoo Год назад

Imo you can notch the trans to run the Honda starter since you will need to use the Honda flywheel and clutch with the offset and input shaft flange of the t5 trans. Or just look for a trans that already has a compatible clutch kit and plate for the k series that way in the future if you need a clutch replacement your not dishing out mad funds to remake a clutch disc for that one solo purpose.

@tegnando2697 Год назад

🔥🔥🔥🔥

@JTuned_Garage Год назад

Would it be possible to make an adapter plate for the bell housing from the K trans fit the pattern from the other trans? Just a thought. If so then bolting the transmission to the K series motor would not be an issue.

@groundedgarage5731 Год назад

You can probably find a bell housing for the t5 to ls pattern

@khamkham7134 Год назад

CD009s are pretty common for rwd k swaps. Kits are already available. And you can still buy new CD009s.

@WhiskeyDents Год назад

🎉

@carrillotyme Год назад

I’m thinking cover trans starter hole use k factory hole with crv starter just match up k clutch with trans see how far off it will be it be close but if I’m looking at it right doesn’t seem impossible lmk if this works I’ve used cd09 to k in the past with an adapter plate me and a buddy made before they started manufacturing them

@kaminari8481 Год назад

Rx8 manual transmission they sell adapters to mate with a k20/k24

@TheEp3allday Год назад

Alright I can give you some insight with this. Start off with a 1/2 thick piece of plexiglass. Cut your template out of that. As far as starter location, I’d suggest using the k series location with the k2f s2000 flywheel. Part number FW-K2F-AL Also I believe clutchmasters makes custom clutches. So you can have them do a k series diameter with a different spine.

@slimhonda6352 Год назад

It can be done. But will it be done in the time frame your wanting. How many times is this gonna get put on the back burner. Might be easier to get a trans and plate already made. At least you know it works.

@jeephunterjim Год назад

You need to pull the trans off the bell housing and use a k bell housing

@jdmboostedek Год назад

There's a RU-vid that put a k series into a Ford ranger with a Mazda rx8 trans

@251_Performance Год назад

@TexasHondaChannel

@sideshow45 Год назад

I think it would be cool to see you put that t5 on the K. Stock they are kind of weak units. But tremec makes a TKX t5 that is pretty stout.

@deadbeatgarage Год назад

I think it would be as well.. they're pretty weak but I'm not really looking to make crazy power out of the blazer.. just want it to be more of a cruiser. I really kinda liked the clunkiness of this trans when I had it in the S10 as well.. 😆 I don't know, it was a vibe.

@Tommyfitz01 Год назад

The e46 6 speed transmissions aren’t too expensive and they have a lot of swap kits for those. Just another option. Cheaper than others too.

@Isaac_31492 Год назад

👍

@curtisbeef Год назад

Something like this should really be drawn up in CAD. I'm sure you could get someone on your discord with some CAD skills to help you out. Your gonna just need lots of relative measurements and stuff and they should be able to draw up everything to fit perfect

@marlostewart1107 Год назад

May have to go with a rwd honda trans or go electric. ⚡️

@nicusvisser5229 Год назад

You can make one out of steel plate Wich wil be cheaper and if it works the transfer that to the aluminum

@riyaadryklief4220 Год назад

The starter wont be an issue since it bolts from the engine side and not the trans

@crossfox3477 Год назад

If going off ls based adapter plate you could go with nv3500 they are plug an play ls bolt pattern they came behind 4.8 ls trucks would work with the adapter plate for ls transmission bolt pattern that would be a easy route

@deadbeatgarage Год назад

Yes, and I have one offered to me as well atm.. we'll see. The nv3500 is more than likely the route I'm going to go

@crossfox3477 Год назад

I have 98 s10 I'm planning ls swap down road it currently a 4.3 auto but old 4l60 is beat so iv been doing alot resurch on nv3500 swaps only bad for me is out here in Alabama their hard to find for fair price

@orgl0l896 Год назад

with the spacer, using a gm starter might not be overly difficult to line up

@orgl0l896 Год назад

Also, to add to this theory- talk to someone that rebuilds those transmissions, and see how much you can get away with rotating it. you could easily get the starter outta the way of interfering with anything, if you could rotate the trans a little bit.

@knight_riderz303b2 Год назад

gotta hit up the boosted boiz they know pretty much everything about k series they could point you in the right direction

@Ckiller95 Год назад

Use a different trans that has an adapter made or if you do get a adapter cutting the trans for the starter is not that bad especially if there’s an adapter in between

@deadbeatgarage Год назад

Yeah I was thinking that as well...

@SWATxSniper417 Год назад

I would use and s2000 trans if your trying to go RWD

@mannybaca7253 Год назад

Change the bell house on the trans

@mikesgarage2907 Год назад

Suggestion. A S2000 trans or a CD009 can be

@bobfeber1099 Год назад

They make a kit already with the 350Z transmission that goes on the K-series

@mannydays2594 Год назад

It would probably be easier and more cost efficient to just buy an s2000 trans/ adapter or cd009/ adapter and just make it manual than spend money and time to make that work, cuz money is time!

@mikebanks6704 Год назад

Time is money. Maybe he made one just to see if he could he does do stuff like that to save some money sometimes but then again like u said time is money

@deadbeatgarage Год назад

I like the challenge but then again.. a different trans will more than likely be the easiest route.

@mikebanks6704 Год назад

@@deadbeatgarage I think no matter what the build is going to be sick af don't matter what trans it got 🤣🤣 the real #dbfam knows how this man rolls 💪🏼

@zacchiki2811 Год назад

I was just about to comment the same thing brother

@petrolhead8851 Год назад

@@deadbeatgarage cd009 with adapter plate is your best bet, an s2000 trans is expensive compared to cd009 trans

@jtyoung706 Год назад

Stupid idea but you could rotate the bellhousing on the trans 180° that should solve the starter location misalignment. You probably are punching above your weight class with this one, but you don't know what you can't do... until you can't do it. Give it a shot. Worst case scenario the money you lose on materials will pay for itself in experience!

@dexmcdaniel9072 Год назад

They have a adapter for the rx8 transmission to fit a k series

@lindapeek6697 Год назад

Set the backwards template down & redraw it then it’s up-right

@KIutch666 Год назад

If you're using the K series flywheel and the Chevy clutch and pressure plate than i don't think you'll have much issue running the Honda starter if it bolts to the motor side. You'll just have to clearance the trans and create a dome cover for it Id say. It looks doable, might need a machine shop to create the spacer off the crank and use and carrier bearing from the Chevy in the spacer but that's a simple part to make. Id say go for it, I'd love to see a bastard blazer build!

@KIutch666 Год назад

I think the bigger issue is getting the starter to reach the flywheel after putting the crank spacer in

@jasonpizarro625 Год назад

Do you know what I think I think you should get a different transmission

@deadbeatgarage Год назад

Haha probably

@adamdalglish8545 Год назад

Just put a big block in it bro the truck deserves it ..

@emsea7279 4 месяца назад

We here

@moneyluis7809 Год назад

Bro no body used that adapter plate!!! Everyone used s2000 tranny with k series motor! Simple to find, cheaper than to get that adapter plate custom-made

@tennesseehewitt8737 Год назад

What up with honda s2000 gearbox

@RMerritts66 Год назад

Grab an ar5 trans out of a 2wd Colorado, fabbot has an adapter for that combo and it’s much stronger than the t5.

@Preface_stormy Год назад

its over your pay grade lol you are going over your head there is a k swap rx8 /mitya trans swap kit or some like that aki in keep gunning did the rx8 k swap. you should use a ref can wait to see what you come up with best of luck

@chylodavis7573 Год назад

Tilt the trans to clear the starter

@chylodavis7573 Год назад

Or the engine

@flippoinva Год назад

Yo dog j35a4 turbo 400 inline pro adapter

@Turbo-87-318 Год назад

Those t5's are maxed out at like 250 tourqe

@GlassWerx Год назад

James on Texas Honda Channel did a kswapped Mazda truck using an rx8 trans. Check his channel our for some ideas

@zvautobuild8832 Год назад

Remember the K series engines sit on an angle, so if you line the top of the gearbox line with the top line of the engine, your gear stick will not sit correctly. Also the stater issue, if you use a k series starter, then you will need a k series flywheel, then you will run into the issues of the clutch plate center splines not matching the gearbox splines. There's a lot more things to look at before doing this. I highly recommend buying a kit made with everything included. Will save you a massive headache