Trend CDJ300 Dovetail Jig Assembly & Initial Test

Подписаться 61 тыс.

Просмотров 2,6 тыс.

50% 1

Trend CDJ300 Dovetail Jig Assembly & Initial Test
In this video I want to guide you through the process of putting together the Trend dovetail jig CDJ300. Plus I will show you the initial setup required to start cutting your lapped dovetails.
Shopping on Amazon for Trend CDJ300:
UK - amzn.to/49GuiiI
Disclaimer*
This jig has been sent to me by Trend free of charge. However I have not been paid or asked to say any nice things about this product.
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#dovetials #woodworking #dovetailjig
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

Хобби

Опубликовано:

20 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@gaborpallosi7600 3 месяца назад

Love you Maaan😍 Hope you are all well!🤗😘

@CasualDIY 3 месяца назад

All good my friend 👍

@paulcooper9187 3 месяца назад

Looking forward to the detail guidance on this. Good review so far , as always

@CasualDIY 3 месяца назад

Thank you, that video should be out next Wednesday 👍

@afpitbull60 3 месяца назад

Well done, Tomasz! I look forward to your follow-up session.

@CasualDIY 3 месяца назад

Thank you, the video will come out later today

@gnic76 3 месяца назад

Nice video, 👍 If you add another scrap piece of the same thickness to the other side on front and top, the bars should clamp down on the stock better, plus helps support the template.

@CasualDIY 3 месяца назад

Very true 👍

@stephensenior3589 3 месяца назад

These have always been a good jig, but I'm old and still prefer to cut my dovetails by hand less noise and mess 🙂. Nice video as always 👍

@CasualDIY 3 месяца назад

Oh you need some skills in your hands to cut them properly plus they are way beyond my patience threshold 😅

@dougwardle2175 3 месяца назад

I have the Axminster jig and it’s great…….once it’s set up which is a bit of a trial. You’re also a bit limited to the width of your wood, it really needs to be in 1/2” increments. I tend to use it for boxes and now have a cheap Katsu router dedicated to the jig and always use the same thickness of stock but still have to make the odd adjustment

@CasualDIY 3 месяца назад

Yes these jigs require testing and adjustment before the final cut. And I think a lot of people are put off by that. And it's a shame as then you can create some amazing projects.

@theatticwoodworker4594 3 месяца назад

it is a great jig and i like your video, looking forward to part 2! the key is in the detail and test, test, test on scraps.

@CasualDIY 3 месяца назад

Exactly the video will be coming out later today

@MCsCreations 3 месяца назад

Really impressive jig indeed, Tomasz! 😃 Thanks for the review!!! Stay safe there with your family! 🖖😊

@CasualDIY 3 месяца назад

Thank you for watching mate 👍

@barry.w.christie 3 месяца назад

Another quality video as usual 👍and another bit of Trend kit which seems to be quite expensive for what it is 👎 So £115 for a 300mm Trend jig or you could spend £100 for the 600mm Lumberjack jig (looks like the Excel jig I have and is still in the box) from that well known auction site ... would be interesting to see a comparison of the two.

@CasualDIY 3 месяца назад

Overall these jigs are not cheap. I think the quality of the Trend one is very good although can't say how it compares to the Lumberjack as I don't have access to their jig. For me a bigger letdown is that it only has one template as standard. And if you want them all then the price stacks up.

@mattroberts5691 3 месяца назад

Brilliant Brilliant Brilliant!!!! This is so well timed! Thank you. I've had the CDJ300 for a few months and not got round to putting it together until last weekend. However, i've just not been able to find any decent videos on the configuration. There are some, but they're not great. (Unless my RU-vid searching is poor!) This is exactly what was needed, and much better than Trend's own 2 minute video on how to use it, which is disappointing to say the least. I really can't wait to see the follow up video where you dive into the config a bit more. Out of interest, what's the thickness of the stock material you're using? Looks like 18mm pine or rosewood to me. Thanks again.

@CasualDIY 3 месяца назад

Well I glad that my video was some help. Yes the material is 18mm pine. The follow up video should be out next Wednesday 👍

@mattroberts5691 3 месяца назад

@@CasualDIY Excellent. Can't wait for the follow up next wednesday.