Тёмный

trick for u joint install 

Mobile Mechanics
Подписаться 666
Просмотров 53 тыс.
50% 1

Опубликовано:

 

30 июл 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 23   
@powerstrokesmokeelliott3381
Hammer away?...just use a C clamp and put the squeeze on!!
@EA-tz2np
@EA-tz2np 3 месяца назад
Yes why Hammer it? I'll do my own ty
@sealstech8087
@sealstech8087 2 месяца назад
I just replaced one on a 3/4 ton dodge yesterday that had 96k on the original joints. First time I have done it in 10+ years and was confident of my ability with a hammer. I ended up admitting defeat and went back to rent the u joint tool at the parts store. What this tool does not tell you is that it installs AND removes joints in a way that a general C clamp cannot. They charge a deposit but Its absolutely worth it. I still got one of those bearing pins misaligned and it broke the rod. I picked it out and cleaned off a rod from the old bearing and it was fine. Moral, if it is 1/16” away from letting you fit the c clips back in, one bearing rod fell sideways, dont force it and just start over. 🍻
@MidnightPolaris800
@MidnightPolaris800 Год назад
LMAO WHAT?!
@mobilemechanics6565
@mobilemechanics6565 Год назад
Shorts I think I some what remember doing this and running out of time didn't want a multi part but probably wouldn't have been a bad idea
@Julianconanhernandez
@Julianconanhernandez 9 месяцев назад
I didn't understand anything he said lol
@jonesfarm1836
@jonesfarm1836 5 месяцев назад
Me either. Mumbles 😂
@gositdown.3800
@gositdown.3800 3 месяца назад
"....before it gets too late and you collide". huh?
@godsillest
@godsillest Год назад
Jesus
@mobilemechanics6565
@mobilemechanics6565 Год назад
Hotep
@damianm7925
@damianm7925 20 дней назад
What brand U-joint it is or part number?
@mobilemechanics6565
@mobilemechanics6565 19 дней назад
Go to O'Reilly's, now hopefully there's a competent employee that will scroll the list and grab the few it list, you should bring the former or using a mil caliper measure the dimensions. The oe one here used a plastic nylon injection to clip it instead of just clips, I can imagine it was a factory streamline to make a humans job less necessary. And also encourage dealer over independent. If it was closer to that video I'd know I have that and most of the common Diesel's joints, but the boxes disintegrated in the moisture, why I discarded and have a cabinet for parts and retained pieces that gets WD 40'd everyone awhile
@mobilemechanics6565
@mobilemechanics6565 19 дней назад
Kinda sad thought 7 years used O'Reilly's more because I met some of the best part people, and maybe as a starter, filler, or stop gap job the pay would do, but seems after a year or two, no matter the enjoyment, or fulfillment received, not enough to retain my old friends, everyone but literally 4 pple 1 commercial counter, and 1 general managment other district, last guys just old works to cover the partial social sec. But I used to be so close I could check myself out, get my own parts, didn't have to rent tools just bring it back. Hell met the only chick that made me retarded, and was the worst loss right before the start of this year. I knew it wasnt real, or ... She died. Haven't really took time to miss her till now. Since initially grieved.
@milje2010
@milje2010 Год назад
1 "kwik trip"
@tthams73
@tthams73 3 месяца назад
Trick / advice: keep everything clean when replacing U-Joints. This dudes just working in filth. Not a great start for your new U-Joints.
@Aden_lr
@Aden_lr 2 месяца назад
I’ve changed many dirty not filthy but a little dirty and all my changed u joints have lasted me 100k+ miles
@andrescachu7907
@andrescachu7907 Год назад
What type of grease do you use
@mobilemechanics6565
@mobilemechanics6565 Год назад
For u joints just a general high temp but you can also use white lithium grease
@mobilemechanics6565
@mobilemechanics6565 Год назад
Key is you don't want it to dry out
@themousebouse
@themousebouse Год назад
Don't use a hammer bruv.. cause vibrations all over again
@revp5004
@revp5004 Год назад
whats this on pal?
@mobilemechanics6565
@mobilemechanics6565 Год назад
Ram but the nylon locker is on other vehicles as well. Working on a lml gm it has them to
@revp5004
@revp5004 Год назад
@@mobilemechanics6565 ok thank you
Далее
How to replace U joints with no special tools
13:48
Китайка Шрек всех Сожрал😂😆
00:20
Разоблачение ушные свечи
00:28
Просмотров 504 тыс.
Это iPhone 16
00:52
Просмотров 522 тыс.
How To Replace Factory Plastic Injected U-Joints
24:28
Просмотров 362 тыс.
How To Replace U-Joints 2 Ways
14:23
Просмотров 614 тыс.
The Right Way to Install U-Joints
10:45
Просмотров 58 тыс.
RAM 2500 U-JOINT INSTALL
9:51
Просмотров 42 тыс.
REMOVING U-JOINTS THE EASY WAY!
5:03
Просмотров 24 тыс.
Replacing a drive shaft U joint
16:18
Просмотров 181 тыс.
How to Replace Axle U-joints. (Super Rusty)
15:34
Просмотров 19 тыс.
Китайка Шрек всех Сожрал😂😆
00:20