Tricks and Tips to Use a Jeweler's Saw Like a Pro

Подписаться 156 тыс.

Просмотров 72 тыс.

50% 1

This video will teach you how to use a jeweler saw and give you some helpful tricks and tips so you can cut like a pro along with not braking as many blades and cutting your fingers.
This video is sponsored by Ottofrei.com but I'm the one that picked all of the tools and I was able to make the video how ever I saw fit.
#jewelersaw #jewelryskills #jewelrytutorial
Check out SweetNovemberJewelry:
/ sweetnovemberjewelry
Blog Post:
www.gomeowcrea...
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
GomeowCreation...
GomeowCreation...
If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel
----------------------------------------------------------------------------------------------------------
If you would like to directly support the channel you can do so in a few different ways.
1. Like, comment and share my videos
2. You can make a one time donation via Paypal of any amount www.paypal.me/...
3. You can sign up a monthly donation via my patreon for as little as $1 per month / gomeowcreations
4. Just watching my videos helps out too and I'm happy to see that I have been able to help some may people get into jewelry making.
#pepetools #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 109

@mjremy2605 2 года назад

I learned so much! This was incredibly useful, many thanks! I have wood working tools but this is mechanical engineering and chemistry. Funny how all the sciences intrude on the arts - structural for wood, metal, and fabrics, mechanical for jewelry and metal, chemistry for jewelry and cooking, etc. Not enough time in one life to learn them all but I'm getting there slowly.

@nilo70 4 года назад

My daughter lives in Kent , Washington . Small World indeed. Thank you Sir , for these college level tutorials !! I learned more in the first 5 minutes of your video than I learned all week on RU-vid! !

@GomeowCreations 4 года назад

Oh cool And thank you. I try to throw a lot of little tips and tricks into my videos that I have found to help out over time. 😅👍

@juliel6254 6 лет назад

HI Randy, this was great! I really appreciate your showing not only saw set up and techniques, but also setting up one's bench pin and different styles of pins. That is very helpful. Also appreciate your demo's on the different jig vise miters and tube cutters. Thanks! : )

@GomeowCreations 6 лет назад

Hello Julie, I'm happy to hear that you found the video to be helpful. I wanted to show just about everything I could think of that related to using a jeweler's saw and how there're a lot of different options to choice from.

@cherylgavette6888 7 месяцев назад

😢@@GomeowCreationsk

@GomeowCreations 6 лет назад

This video is sponsored by Ottofrei.com but I'm the one that picked all of the tools and I was able to make the video how ever I saw fit. If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that that I'm updating all the time so bookmark it to stay up to date GomeowCreations.com/tools-and-materials and GomeowCreations.com/partners-discount-codes *If you buy any of the tools or materials from my list I will make a small commission at no extra charge to you and it helps support the channel*

@infledermaus 6 лет назад

GomeowCreations Did Otto give them to you? If so, nice. I should make videos for free tools! I want a roller.

@GomeowCreations 6 лет назад

Yes, but I think it was only because I offer some value to them in return. I have a roller mill but is one of the cheapest ones I could get. amzn.to/2v0iW7e it does work but I would like a better one. 😀

@infledermaus 6 лет назад

GomeowCreations That's cool. You have more space than I do and much nicer view!! I have a studio apartment in an old folks community, but it has a huge bathroom for those who have motorized chairs. And that there is where put my bench! ;-) No, really! And I don't even have to climb over it to use the porcelain. 😁

@GomeowCreations 6 лет назад

Well my view is gone now seeing that I moved but I now have a full room for my work. I remember when I first started, I was working on a small table in my small kitchen. 😅

@user-cn5ny7wf6e 11 месяцев назад

Excellent instructions and demonstration. Thank you for your expertise.

@GomeowCreations 11 месяцев назад

😁

@allanthompson9695 Год назад

Great. Thanks. Very concise. You are a good teacher..

@user-iv2xo3dn5o 3 года назад

فيديو رائع جدا ومفيد معدات ممتازة سلمت يداك شكرا كثيرا لك

@GomeowCreations 3 года назад

😁👍

@clivemilner 2 года назад

Brilliant, Brilliant 👏 👌. Just what I needed.

@simplekustomsbyeddiepapand1838 8 месяцев назад

Just bought one Thanks for sharing!!!

@casadonnelly2498 4 года назад

Thank you! my blade is finally tight! I can't wait to use it now.

@GomeowCreations 4 года назад

No problem 😊 👍

@andym5213 4 года назад

Nice - a great way of showing how I can use a bench saw - will definitely look for more :)

@GomeowCreations 4 года назад

Well thanks and I hope more of my videos are helpful

@LeeOfBent 6 лет назад

Thanks for sharing the different Jeweller's tools. Found 2 I never heard of and have put on my OttoFrei wishlist. Keep at it, look forward to your next video.

@GomeowCreations 6 лет назад

What 2 tools, if you don't mind me asking?

@cic8006 2 года назад

Hi, I really like this vid! I got a lot out of it and loved the little figures! THANK YOU!

@thegalleryofeve 10 месяцев назад

Thank you so much for this video! ❤️🙏🏻❤️ I’m currently struggling to even get the saw to go up and down!!! 😩😑 It’s as if it gets stuck in the metal! 😧 I guess I should push it a little more perhaps? 🤔 I’m following the table that shows the size of the saw depending on the thickness of the metal, and I am loading it in the correct orientation (I’m also using the Green Lion saw frame), so yeah … sawing is a struggle for me at the moment 😓

@sheilahdang11 2 года назад

You're good with that saw. I was impressed with your cutting of Lincoln from the penny.

@GomeowCreations 2 года назад

Thanks but it's been a lot of practice for sure

@petrichor7121 5 лет назад

Very nice and informative! Learned a lot, thank you.. 😊

@jimbettridge3123 6 лет назад

Thanks Randy, educational for sure!

@GomeowCreations 6 лет назад

😀👍

@Kodeness 6 лет назад

Nice new tools and awesome video! I’d suggest a video about the properties of the different metals you use, when not to use them, things like that. Maybe an introductory video to the machinery you use too. Thanks for sharing your experience.

@GomeowCreations 6 лет назад

Thank you for the suggestion and I do think that is a good idea. I will have to think of an interesting way to do that.

@m.h.6143 3 года назад

GREAT vid....thank you SOOOO MUCH!!!

@GomeowCreations 3 года назад

Thanks for watching 😊👍

@nilo70 4 года назад

Hoorah ! I made it 900. From your new subscriber in California .

@GomeowCreations 4 года назад

Nice and thank you. What part of California are you in?

@Vei2aC 6 лет назад

i used the sythetic waxs and others but always found chalk and bee wax was easyer for me to get, real helpful vid, thank you, nice to see someone els cutting coins to lol, i cut out a rabbit one time, 35cm x 40cm, i have a frame with a 50cm odd throat, this took me over a week to cut out, did nothing els in the week but saw, the bigger the frame, that harder it is to keep that blade straght, love that black frame you have, looks real solid.

@GomeowCreations 6 лет назад

I do like the black saw frame that I have but I do like to use an 8in frame for just about everything I do. I have used it so much that it's not hard for me to cut a straight line =)

@josepeixoto3715 3 года назад

**Great Video** ---very skilled! learned quite a bit, Thanks

@esliet 6 лет назад

Great video. Very clear and full of good information.

@GomeowCreations 6 лет назад

Thank you very much, I'm happy the info came across clearly. 😄👍

@esliet 6 лет назад

I see several items I want ! Does your discount code have expiration date ? What do you think of Knew Concept saws ? They have easy tension control

@GomeowCreations 6 лет назад

Yes the discount code is only good tell 10/31/18 as for the Knew Concepts saws, they look like that would be an awesome saw. I wasn't able to get my hands on one for this video and I might be able to in the future. I do know that Ottofrei does sell them so if you wanted to get one you can get it for a little cheaper. If you'd like another discount code, just head over to my website, at the bottom of the home page you will see a spot to put your email in. This will sign you up for my newsletter and it will send you a better discount code. 😄

@cosmicaudio4589 2 года назад

I print my designs onto printer paper and use double sided carpet tape which i have three sizes of it up to 2 inch. The tape peels off or soaks off and the adhesive residue cleans up perfectly with white spirit. Regarding the printer paper I use ordinary A4 paper and I print the same image lots of times in various sizes and keep what I don't use for future use in a folder.

@admiralrutledge9214 4 года назад

Great video, I needed this. Thank you!

@lulubella83 5 лет назад

So useful! Thanks!

@hephaestushymeryos932 2 года назад

I LIKE

@GomeowCreations 2 года назад

😁👍

@ma1900bi1900 4 года назад

thank you

@cuzzinpaulie 3 года назад

great video. wish i would have seen this before. just cut a heart shape that took way to long and too many blades.

@GomeowCreations 3 года назад

It takes time and blades to learn how to use this kind of saw 😁👍

@cuzzinpaulie 3 года назад

@@GomeowCreations i just subscribed. i look forward to seeing more of your videos. thanks

@1incutheta 6 лет назад

That was enlightening, Randy! I learned some stuff!

@GomeowCreations 6 лет назад

Happy to help.

@gerryannbrown9645 4 года назад

Very helpful, thanks for sharing, I'm at this so it really helped.

@arturonomas4470 6 лет назад

Hey thanks for this video! I live close to the beach so it's kind of hard to work with Cooper because at the next day the polished is missed. I think it will be good to know something about textures and other topics related to rusty jewelry (which is very fancy) thank You for everything.

@GomeowCreations 6 лет назад

If you want copper to keep it's polish you can add a clear coat to them to seal it. 😄👍

@arturonomas4470 6 лет назад

GomeowCreations thanks!

@Vei2aC 6 лет назад

jewelers pickle and a buffing wheel with a good fine buffing compound.

@infledermaus 6 лет назад

Oh I like that arched frame. Looks antique. I just got a Knew Concepts frame. The thing is a f*****g miracle. Got the aluminum model. Can't afford the titanium and don't saw that much.

@GomeowCreations 6 лет назад

I have been looking at the Knew Concepts saw frames but I haven't been able to get my hands on one yet.

@infledermaus 6 лет назад

GomeowCreations I got mine from Rio Grande. It was the cheapest one I found. It was about $65 for the 3" frame. I thought I ordered the 5" frame, but it is a 3". Oh well. I also have the same 8" German frame you have in your video. Works for me though. I moved the tightening screws to the right side last night (OMG! Easy.) because I am tired of hammering my fingers on my left hand. So annoying! Be sure you get one with the tensioner. So much better than tensioning the frame by bending. There is also a free used to get exact tension. Brilliantly. I skipped the swivel model. There is actually a measure in the top of the frame to measure your blades! I don't cut huge pieces. At least not right now. Although I did just by a 6"X12" 18 ga hunk of copper .... ;-) Cheers. If you get one, let me know what you think. I first heard about it from. Andrew Berry here on RU-vid. It's very pretty, too. Frosty red.

@jolujo5842 2 года назад

Nothing in your links shows the bench vise/ anvil for holding the wood cutting horse/backing block

@GomeowCreations 2 года назад

This one? amzn.to/3Gs3xQA

@gryphondales9634 Год назад

Okay Randy, so here’s my question. I bought a green lion curved jewelers saw a few years ago and I’ve yet to find any tutorial videos on how to adjust the saw tension. There’s no lever or screw to tighten the saw blades tension. I’ve had this saw for almost 2 years and practically haven’t touched it because every time I try to set it up the saw blade has way to much slack. If you could please explain how to adjust the saw blade tension on a curved jewelers saw that would be awesome! Thanks man.

@samudragrafika 3 года назад

Thanks

@GomeowCreations 3 года назад

No problem

@annedarr1894 5 лет назад

@BlooStorm1 2 года назад

Thx so much! so …. what did you think of the Lion Forge saw? …. Also, I watched several videos before yours, trying to find one that could give me an idea of how to cut my new bench pin. Thx for showing this in your video!

@GomeowCreations 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-J2HOcqGVXHA.html I made a video about it 👍

@kanithikumar2205 4 года назад

Super brother 💪🙏🙏🙏🙏🙏🙏

@PremKumar-pr5iw 6 лет назад

Hi sir, I learnt a lot from this video. I have a doubt? If I wanna cut wood with this jewelry saw, which blade should I use

@GomeowCreations 6 лет назад

We'll it really depends on how thick the wood is. Like then I cut the bench pin I used a size 3 blade and it cut through it very fast and easy. If you want to do thinner wood like 3-4mm you can cut it with a 2/0 with no problem if the wood is soft. You will have to test out the blades to see what you like and what works the best for you.

@philhunt1442 Год назад

Do you just use paraffin wax to lubricate the blade?

@rocioguillen3160 5 лет назад

I bought a set of very fine blades and when I try to put them on my saw, they snap just by closing the clamps. I’m new at this so please excuse this question. Is that supposed to happen? I cannot tighten the blade at all without it snapping. Are they defective? Please tell me what size blade do I need to get to cut jump rings from 16g copper wire. Thank you for all the info you share.

@GomeowCreations 5 лет назад

It sounds like you might be setting it too thigh, this will snap the blades. As for the 16g jump rings you can use size a 3 or 4 saw blade, make sure to use a lube to make it easier.

@infledermaus 6 лет назад

I want that saw blade caddy! Where'd you get it? Suppose I could make one, but yours is much nicer than anything I could make, and I haven't got a lathe.

@GomeowCreations 6 лет назад

www.ottofrei.com/Swiss-Sawblade-Assortment-On-Wood-Stand Use offer code GMCSAW to save some money on your order.

@luigiesposito7385 4 года назад

Hello, I try to explain myself better, I need to tighten silver rings with semiprecious and hard stones but I would not like to remove the stone. how can I do? what tool do i need?

@michelleosborne8951 3 года назад

What size blade would you use for that penny

@GomeowCreations 3 года назад

4/0

@nilo70 4 года назад

I live in Bakersfield in the beautiful San Joaquin Valley

@GomeowCreations 4 года назад

I was in Murrieta before moving to Spokane Washington

@zoemaree3151 2 года назад

This was super helpful, thank you! I have this other issue with my saw blades popping out of my saw frame after a few strokes in the metal. I thought it was my original saw frame as I got it in a kit, but I recently bought a second saw frame (still a bit of a cheapie) and it is still doing it! I am tightening the ends as much as I physically can, but it is still coming out. Today it kept happening so much, I gave up at my bench. Is there any reason why this might be happening?

@GomeowCreations 2 года назад

It sounds like you are not tightening them down enough. To hold the blades.

@zoemaree3151 2 года назад

@@GomeowCreations Thank you. That's frustrating, because I am tightening as hard as I physically can...

@GomeowCreations 2 года назад

Make sure there is nothing stuck in there so it can close all the way

@mjremy2605 Год назад

It may be the saw frame. Try a better saw. I read that the cheaper saws have tensioning issues.

@amomschoice 3 года назад

What size wood did you use?

@stratagemjewelryandmore7660 3 года назад

How do yo get sponsers

@GomeowCreations 3 года назад

They will contact me or I contact them. If I contact them I send them a links to my videos along with my RU-vid numbers showing views, watch time and subscribers per month along with total subscribers. If they like what they see or if I like what they are offering we will work together.

@abstractbybrian 5 лет назад

@14:59 you mention that you can use a Dremel tool to clean the edges of that triangle that you cut out. Which Dremel tool would you use?

@GomeowCreations 5 лет назад

I use a lot of different tools to clean up the saw marks, here are all of them haha. amzn.to/2rrvi6Z amzn.to/2rqcAww amzn.to/2E6HAcB amzn.to/2E87Ses amzn.to/2Ejuwlc

@josriedel7917 6 лет назад

If you have your finger in front of the blade you risk impaling your finger with a broken blade

@GomeowCreations 6 лет назад

You're right about that. I've had that happen before with my finger on the side of the blade. 😅

@josriedel7917 6 лет назад

It happened to one of my tutors and it can be a painful procedure to remove them

@toolzshed 4 года назад

they should make a jeweler's scroll saw :D

@GomeowCreations 4 года назад

I think they do but I can't seem to fine one right now. I'm sure you can also convert a normal scroll saw into one that can use these saw blades.

@allanfink6138 4 года назад

um, you mean maybe like this? www.knewconcepts.com/Precision-power-saw.php

@GomeowCreations 4 года назад

Yeah but that is a large investment 😅👍

@allanfink6138 4 года назад

@@GomeowCreations True, plus there is just something intrinsically satisfying about sawing metal by hand. I think I would need a huge requirement of a LOT of sawing in a hurry to want to use a power saw.

@GomeowCreations 4 года назад

Yeah, I can see if all you did was saw stuff how this could help speed stuff up and save your wrist but I don't see a point of getting it for a hobbies. 😁

@KBR56. 3 года назад

Hello I'm know this working and a pro cutter worker but now I don't have work in my country 😔

@GomeowCreations 3 года назад

Sorry to hear that but I can't help you with that. I do wish you the best of luck.

@KBR56. 3 года назад

I'm jewelry saw pro cutter I'm know working this but 😔

@juansimon5802 Год назад

u know defacing American money is a federal crime, right?

@GomeowCreations Год назад

But is it really? makeitfrommetal.com/is-it-illegal-to-melt-destroy-us-pennies-and-other-coins/#:~:text=It%20is%20not%20illegal%20to,legal%20in%20the%20United%20States.