Тёмный

Trinity Slot Machine 13.5T Analyzer test and how it compares on paper with Xfactor and Hobbywing V10 

TelecomandoRC
Подписаться 4,2 тыс.
Просмотров 3,7 тыс.
50% 1

Other Recommendations:
MyLaps RC4 Hybrid AIT10R078
AKA CA Glue
Hobbywig Electronics
Tekin
Castle Creations
Team Powers
Gens Ace
Gorilla Tape
JConcepts CA Glue
MIP Tools (Drivers)
Kobalt Pliers
Craftsman Pliers
Craftsman wrench
Tamiya Paint (PS-X)
Duratrax Paint by Horizon Hobbies
Savox Servo
Team Powers Servo
Traxxas Servo (for non-demanding applications)
Proline Bodies
Proline Tires
JConcepts Bodies
DE Wheels
WD-40
Yokomo Touring Tires
Team Powers Touring Tires
Dremel 4000

Опубликовано:

 

29 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 16   
@mikebianco7854
@mikebianco7854 Год назад
Great video. Learned things TY
@telecomandorc
@telecomandorc Год назад
My pleasure. 🤝
@andyshipley1377
@andyshipley1377 Год назад
Great analysis, really well explained. Thank you!
@telecomandorc
@telecomandorc Год назад
My pleasure.
@chummlysrc654
@chummlysrc654 Год назад
wow had no idea you could do that i learned something new thank you
@telecomandorc
@telecomandorc Год назад
My pleasure. At some point it will find it's way in my DR10. I am comparing it the the HW hopefully by the end of the year.
@islandrc-duke1972
@islandrc-duke1972 Год назад
Cool analyzer and great information
@telecomandorc
@telecomandorc Год назад
Thank you. 🤝
@TheNewnan3
@TheNewnan3 Год назад
So higher kv and rpm per amps is generally always better? I’ve decided to go with an R1 21.5 for the next on road season. Wondering if I should replace the “old news” 13.5 X-factor in my stock buggy 🤔
@telecomandorc
@telecomandorc Год назад
Not necessarily. Assuming the voltage is the same when testing if one tests the same can with two rotors at the same amps, the rotor (assuming the same diameter) with more gauss will be slower (less Kv) but will have more torque because it reaches 6A at lower timing on top of the extra gauss. Now, if one takes the same rotor and two different cans (such as the Slot Machine and Xfactor) then yes. I do not know what the difference is between the two cans, but every Slot Machine I have (25.5T, 21.5T, and 17.5T) runs cooler, higher Kv, at similar or lower timing. The main thing is the heat. I got rid of my Xfactor motors and only have Slot Machine and HW G4.
@TheNewnan3
@TheNewnan3 Год назад
@@telecomandorc Ok thanks for explaining. I have renewed interest in off road and my 13.5 4wd buggy. Did a race last weekend and had a decent finish. I currently have a Xfactor with timing at 50 degrees but was considering a R1 or Slot machine....
@telecomandorc
@telecomandorc Год назад
@@TheNewnan3 So far to of my rotors in Xfactor motors have wet the bed. one in my 13.5T SCT. This can happen with any brand, but two in less than a year of use in my case. Maybe a bad batch. The Slot Machine used the same rotors but it runs much cooler. Many of the top guys here use R1... so there must be something there. How do you like 4wd buggy? I am going back and forth between doing indoor 4wd buggy or not this winter.
@TheNewnan3
@TheNewnan3 Год назад
@@telecomandorc I keep reading about upgraded or modded rotors? Is that where a lot of speed is hiding with the rotors? Knock on wood Ives had good luck with my x factor so far but I guess I haven’t run it a ton. I really like 4wd buggy over the truggy I had, my SCT and 2wd buggy. It’s very precise and I feel like it’s the best compliment to TC for the winter. It’s an X-ray XB4 so it should be good I guess lol.
@telecomandorc
@telecomandorc Год назад
@@TheNewnan3 😆 It is an Xray. There is a lot of magic in rotors. I like TEP1152 for Trinity.
Далее
New max10 esc unit and 4000kv motor test
2:36
Просмотров 10 тыс.
7 Ways You're Destroying Your R/C Car
10:28
Просмотров 1,5 млн
Aftermarket Horns on Amazon are Getting Out of Hand
15:06
Trinity Rotor options for Slot Machine and Xfactor
29:52
Are you turning wrenches the wrong way?
14:13
Просмотров 203 тыс.
HOBBYWING XE RUN G4 走行!
4:37
Просмотров 4,3 тыс.