Triton Shower Heads | Dura-Flow™ Shower Head (Five Spray Patterns) 

Hi Elias, sorry for the delay in replying to your comment. Instructions (as per the instruction manual) for locking/replacing the spray plate back into position for this shower head are as follows; The spray plate and face plate MUST be aligned correctly for reinstallation. To align them correctly, please do the following: a Ensure that the inner plate is turned fully clockwise until it stops. The alignment arrow position is approximately 9 o'clock, when the shower head is in the vertical position. b The lever MUST then be matched up with the arrows position to reinstall the spray plate correctly. Should any difficulty arise when trying to refit the spray plate, DO NOT try to force it back into position. Please make sure the arrow and lever positions are correct. Once in place, the spray plate face should be gently pressed until its edges sit flush with the body. Now installed into the body, start to turn the spray plate anti-clockwise. To lock the plate back into the mechanism, the spray plate MUST be rotated fully anti-clockwise until it stops.

Hi, you will have to lock the spray plate back into position, we show how to do that on this link www.tritonshowers.co.uk/amfile/file/download/file/891/product/1845/ Kind regards, Leon.

Sorry to hear you are having difficulty removing the spray plate. To remvoe the spray plate, please follow these 4 steps; 1. Rotate the spray plate clockwise until it reaches its 'stop' position facing the removal button. 2 Press and hold the removal button in. 3 With the removal button held in, rotate the face plate clockwise past the removal button until it stops. 4 Release the removal button and gently pull the face plate away from the body using the adjustment lever.