Troubleshooting 3D Printer Issues | 10+ Common Problems 3D Printing Beginners Have!

Подписаться 1,1 млн

Просмотров 99 тыс.

50% 1

Jams? Clogs? Leveling? ERRORS!?
The hobby of 3D printing can get frustrating fast! In this video I'll be covering 10+ common problems I've been seeing across all of social media and forums that plague brand new 3D Printing Hobbyists!
This ISN"T an In-Depth troubleshooting tutorial, This video is meant to solve the simple issues I see that can be solved in 1 or 2 steps! I've linked some more resources below for more troubleshooting help!
If you have a problem I didn't cover in this video please feel free to drop a comment below!
Thanks for watching and enjoy!
▼ IN THIS VIDEO
Leveling & Adhesion | bit.ly/3Q2jZws
How to 3D Print | bit.ly/3vkvrdD
Best 3D Printers 2022 | bit.ly/3FZUW92
Tips & Tricks for Printing | bit.ly/3vmxEF9
Scaling Helmets | bit.ly/3Wfz8x3
Cutting Up Files | bit.ly/3G5MIfF

▼ SHOP MY CUSTOM BUILDS!
Etsy Shop | www.etsy.com/shop/FranklyBuilt
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for my favorite FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
▼TIME STAMPS
0:00 - Intro
1:02 - Assembly - Auto Homing Issues
1:52 - Power Issues
2:47 - Leveling & Adhesion Issues
3:38 - Loading Filament Issues
5:29 - Filament Sizes & Differences
6:12 - Layer Shifting
6:51 - Files Not Showing
7:41 - Clogs and Jamming Issues
8:39 - Unstable Prints (G-Code Review)
9:19 - To Many Supports
10:34 - Rushing & Impatience
11:08 - The #1 Thing NO ONE tells you!
12:15 - Outro
13:39 - Blooper
Disclaimer- This video is NOT sponsored by any of the brands mentioned above or throughout this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
#3dprinting #troubleshooting #3dprinter

Развлечения

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 292

@thegamingroot5316 Год назад

i am not even new to 3d print and i watched this just because of how good your content is it is very enjoyable to watch

@FranklyBuilt Год назад

Thank you!!!

@ALEXX_PLAYZ 4 месяца назад

I’m not sure but I think he likes marvel…

@NukegamerboyRA 23 дня назад

@joiscara7191 Год назад

I’m going to get into 3D printing in the coming weeks, and I’m grateful there’s RU-vidrs like yourself guiding us noobs into the hobby.

@lyndysfschannel3452 Год назад

I got into 3d printing and still have not figured out why my prints never stick at all. Ender 3 v2 neo

@vaagaen0068 Год назад

@@lyndysfschannel3452 i have the same printer, but my prints alway stick to the bed. Have you: leveled your bed correctly? set the right z-offset distance? If that doesn't help you could try washing the build plate

@KurtisJoseph Год назад

Oh yeah he has done a great job. I have spent thousands on these machines and do not feel complete without printing. My partner feels as if I am addicted. I stare at all the statues and cosplay in awe... while she says I barely look at her anymore. Idk... Idk. It isn't harmful like drugs. LMAO!

@syshellykay990 5 месяцев назад

You were a huge help to me. Found a worn extruder gear, something I hadn't even considered. Slapped on a new dual gear extruder I had sitting around and I'm back in business, thank you!

@beachcomberbob3496 Год назад

I watch the world collapsing into madness on a daily basis, but I can always rely on you Frank. I can watch you and decompress, while learning something new that I hadn't thought of, even on a basic level like this.

@annettemariani9487 Месяц назад

Thank you so much i had the wires switched took forever to figure out till I found this video

@octoeight1849 Год назад

Legitimately one of the best video intros I’ve seen in a long time. Love your work, you’ve helped me build my first iron man helmets and will hopefully help me with the suit I’m making with your videos. Thanks for the inspiration!

@djweird9461 Год назад

Because of your videos i got into 3d printing, just started my iron man suit...helmet is almost done. Keep up the good work!

@bigdsmooth6 Год назад

Hey Frank, just wanted to say thanks for this video. It's nice to have a summarized resource from a trusted and practical source

@solenvega8950 Год назад

i been watching frank for 3 years since i got my first printer. and i love the part where he said your gonna make mistakes. i love that because its from those mistakes that allowed me learn to why and how to fix it. love this guy.

@user-yl2xo1kk6m 2 месяца назад

THANK YOU FOR HELPING ME SI MUCH I CAN FINALY USE IT

@MrRickle Год назад

I got into 3D printing because of watching you. I’m still super new to it but I’m loving it.

@LincWebb 7 месяцев назад

FINALLY A person who can help me with my 3d printer

@ultancatterson7131 Год назад

Hey Frank I don’t know If you will see this but you have inspired me to pick up my old Ender 3 pro and Gotten me to start printings Again. Right now I am printing a mk42 suit I’m nearly halfway done now and I want to thank you for inspiring people to do cool things like this keep doing what you are doing Frank your amazing.

@vicentegamet0989 Год назад

i searched for more than 3 months and finally found someone that fixed my problems thank you

@ox13m16 Год назад

Thank you for this video and the time you have put into it. I have been having some issues with y axis skipping and never thought to check the belt tension. I am going to give that a go and cant wait for the results. Thank you!!!

@franciscolozada1059 Год назад

Your videos are always so informative and honest. Your the reason I finally decided to get into 3d printing, will finally start the new year into the hobby thanks to the sv01 pro video review. Now I'm always looking forward to your content. Any advice on things one should do to upgrade/updates to do on the printers unless you have a video on it that I probably missed on it.

@davidfarris1332 Год назад

This is perfect. I just got my first 3d printer a few days ago and it's already been a hell of a rollercoaster. First layer adhesion has been murderous.

@oldbeardedcajun5010 Год назад

Thank you for this video. I have learned a lot from your content and has helped my 3d printing so much. Please keep up the great content!!!

@1982pantro Год назад

Thank you for making these videos,I'm a fairly new to the hobby and I've learned a lot,I'm getting my ENDER MAX NEO tomorrow. Cheers 🍻 from Arizona🌞🌵🦂

@Oldmanbambam Год назад

Love your work been going 10 months now printing your videos have helped me many times 👍🇦🇺

@kcfresh53 Год назад

This vid came in clutch cuz I just got a sovol sv01 pro. I really love your vids and I am so happy to finally get a 3d printer.

@gran9144 Год назад

Happy New Year Frank and Maya! Great video.

@motzartzghost Год назад

Frank, thank you so much for all your advise. Im about to undertake my 1st 3d armour (captain rex) from star wars. I'll be doing my 1st youtube DIY (destroy it yourself) guide for the novice. And yeap you'll be linked.

@3dtimelapses Год назад

Very nice video! Also, another cause for the SD Card problem is an error on the 3D printer side, which can easily be fixed by just reinserting the sd card. Otherwise, great video!

@Hedgewalkers Год назад

I really appreciate your video! You taught me a lot, Thank you!

@moonshynesflorida3239 6 месяцев назад

Thank you so much! Love the videos

@zagmir4727 Год назад

I've been watching since Backyard Ninjas, you the man Frank.

@FranklyBuilt Год назад

Thank you bud!!

@dirkjensen935 8 месяцев назад

PSA: Australia is 240 V. Great video btw, thanks for making helpful content

@mattwilliams1781 Год назад

You are the best youtuber ever

@Dredikul Год назад

Aaahhh the little words in the back 😂 great video, and love the subtle humor!

@FranklyBuilt Год назад

Finally someone saw them lol

@Dredikul Год назад

@@FranklyBuilt I had to rewind it the first time because I thought my eyes were playing tricks on me 😂 but I saw that you’d had writing in the background before. Though never quite this small 🤏🏼

@jdalfonso4341 5 месяцев назад

thanks a lot for this video. On week 2 of 3D printing and no one ever points out things like check all the assembly screws, because they can loosen with prints. spent 2 days trying to figure out how it went printing perfectly to crap! lol newbie fails lol

@b.easton1842 Год назад

Hey Frank, loved the video. I was wondering if you could go over E-step calibration as this was an issue I had with my printer and just recently got sorted, I think it would be great for anyone else fighting through it.

@sevenpounds1754 9 месяцев назад

Hello hello i appreciate u keep up the great work..i have a voxlab c2 and the temperature keeps rizing when i turn it on untill the runout gies off..and tips n tricks

@beachcomberbob3496 Год назад

I dropped my supports to 2-3 percent and it's plenty. Makes it way easier to remove them at the end. same with the overhang angle - push the limit.

@a7xfanben Год назад

Nice video, thanks!

@peternieves4958 9 месяцев назад

Great video. Thanks

@Verbatim0704 18 дней назад

your videos are the best Frank

@IIIofV Год назад

Thanks Frank. I finally finally bought my first 3d printer. Bamboo labs p1p. I've rushed into it and failed alot of prints I downloaded. I'll adjssome settyou recommend.

@MultiWriter101 Год назад

I must admit - I laughed when I saw the words "I hate u" appear over your right shoulder near the Ironman. :D

@FranklyBuilt Год назад

You’re the first one to comment on the argument that happened behind me lol

@FahadKhan-cz6cd 5 месяцев назад

wow bro, great information

@robo_knightrider2486 11 месяцев назад

Hey, I have a few problems with my 3d printer i got for the holidays.. the printer i have is the creality 6 SE and when is printing, the filament doesnt actually go ON the bed. It curls up and stays next to the nozzle. Another question is before the printer starts printing, there is some excess filament coming out. should i remove the excess filament before it starts printing? should i heat up the nozzle, tighten the belts, or do something else? Nice Video, and I hope i can have some answers. Thanks!!

@addisonwatkins4319 Год назад

I’m new to the hobby, my 3D printers on my table right now😊

@Allansworkshop Год назад

Hello frank i just got an ender3 pro and I have a problem even after trying many different things filement is still not coming out almost as if it was jammed even when doing it manually non comes out if you think you could help me please let me know

@mw3king11 Год назад

Been printing for 2-3 days now. I haven’t had any major printing problems. Had one piece I snapped in half but it was a long thin piece @5% infill 🤷🏾‍♂️ everything just takes so long to print. Plus my printer prints at like 75% the speed cure gives me. Think that’s common though.

@TheStarkillr 3 месяца назад

im not sure if you discussed this yet, but what do you do when youre going to run out of filament mid print? also are you able to recycle the excess filament from the supports?

@ashwinmarkides8631 Год назад

Love your dog it’s so cute

@Ralphlac Год назад

The "You're going to F up ALOT" should have been point #1 😉

@francinemajor1326 Год назад

Happy new year, was wondering if you could help me. I’ve been using the Flsun super racer for a few weeks now and wanted to change to nozzle. I was wondering if you know how to or have tips/tricks to changing the nozzle.

@NOCOMP7 2 месяца назад

Hopefully you can help me, I’m going to watch the whole thing lol Neptune 3 kicking me in the teeth (Editors) going back and forth is comical lol

@markr3547 Год назад

hopefully you can help. I have a 3D printer that when I try and heat the hot bed the printer shuts down and restarts. It is an IDEX printer, when I heat the nozzles, they heat up fine, when I move the X-axis it moves fine. Z is fine and Y is fine as well, so I eliminated the steppers having a short or nozzles. The company sent me a new hot bed, I plugged it in and it did the same same exact thing. No viable burn marks on any component on the controller board that I can see. Any ideas where to go from here? I want to say it is the power supply but I do not know how to check this. I have some basic electrical knowledge but have now gotten in deeper then my knowledge. The wires have all been checked for resistance and show good results. i measured voltage in and out today at the cpu said voltage in was 121 v voltage out was 52v that seems hi to me as the cpu tag says 500 w and 24 v and 21 amp what do you think i should try now ?

@MyHelmetStayedOn Год назад

I'm finding that my pc4-m10 screws that hold the capricorn bowden tube in place for my cr10s v2 keep moving back and forth? Basically, the teeth inside the screws aren't clamping onto the tube? I've had to change them. Basically, every print. Any ideas?

@omsingharjit Год назад

In situation of Buying 3D printer from someone for the first time , What should i have to check first to confirm that it's Not faulty ? Can you suggest what should be the test print to Check it's Performence and Quality ? Like Hello world for the 3D Printing ?

@masterchief6523 5 месяцев назад

Gotta question, if you have a 3d printer that you just purchased, and I know you mentioned the belts being already tightened up enough. How would you know for a fact that the g-code file is bad? Is there a way to physically look into the code line by line if needed and make the correction? Or is it just a matter of dragging and dropping if you have like printers and same flavor firmware to do it that way?

@nick117nick Год назад

Awesome video! Just wanted to say Howdy to the lil guy in the back 😇🤣

@seankurek1705 11 месяцев назад

Another helpful vid! Thanks for that! Also kinda curious if anyone has ever tried to print with weed whip cord before?!!?!? lol try it??????

@tylercrye292 2 месяца назад

I wish I could just send my printer (creality s1 plus) to you and see if you could figure it out. Crazy layer shifting and I have done everything you suggested. Creality themselves looked at it and couldn't fix it and refused to replace it.

@gagegriffith9636 Год назад

Hey Frank, can’t wait for the mk 39 helmet video by walsh3d. just finished printing all the parts on my cr-10s pro v2!

@NickyNunchucks69 7 месяцев назад

Please do a sovol sv01 pro beginners setup

@sethnieciecki6370 Год назад

Hello Frank. A problem that I’ve had for a while now is Z-banding. I’ve done a lot of things that have been recommended to me except replacing the z-axis lead screws (the screws look straight and roll smooth). Any tips/recs that you could give/put in a video? Thanks!

@Ezunit1991 Год назад

Hey man I'm looking to get into FDM for cosplay and DND terrain. My resin printer was a gateway drug. What do you recommend for something like that? Looked at Neptune 3 plus, but its out of stock. Should I be patient or is there another model you recommend? Thanks for the content, subbed.

@tylerhowell3111 Год назад

First & foremost thanks for the videos! I started following a month back & now I just unboxed my own Neptune 3 Pro. I do have a question - any recommendations on where to buy spare parts? I can’t seem to find much on Elegoos site… things like filament detectors, etc. thanks again!

@FranklyBuilt Год назад

Honestly I’m not too sure yet! Thank you though so much for that comment

@josiahyarbrouh5047 2 месяца назад

My printer bed is level and I’ve been trying to to figure this one but the printer bed feels like I’m going over a speed bump when it’s running back and forth. Should I take the bed off and see if there’s anything stuck in the track?

@elektrovenabitevidea3923 Год назад

2:42 hatts the best Power supply on that problem i have that problem and i dont know what to do some many Power supply so whats the best

@DarkSpiderMan261 24 дня назад

Howdy there MK 85 Hat

@ChrisJohnson-tn1mo Год назад

One thing I’d like to add to layer shifting issue’s is that it could be a situation where your nozzle snags on the print itself and gets hug up enough that it pulls the whole bed a little because those clips aren’t all that strong holding the bed in place. I find that I either needed to slow down my print a little to avoid jerking, nozzle issues with over extruding due to a worn nozzle and of course z hop to compensate. So when before I start my prints now I make sure to check that the bed is squared up. That way if i see layer shift I can first check that the bed didn’t shift on me.

@jonathonantonio1973 Год назад

I had a layer shift in one of my recent prints and while I didn’t witness it happen unfortunately I’m pretty sure this was the cause. It was a statue with long hair and I didn’t support the bottom of it very well. The bottom of the hair snapped off it’s stand in the same layer the layer shift occurred. Somehow miraculously the rest of the print continued without issue and I was able to break the parts at the layer shift and glue the whole thing together.

@ChrisJohnson-tn1mo Год назад

@@jonathonantonio1973 saved the print. Nice! Way to see it through. I usually stop my prints as soon as I see a failure. It can be difficult to fix a print sometimes depending on what it is.

@jonathonantonio1973 Год назад

@@ChrisJohnson-tn1mo thanks man, I was so tempted to re slice but it had already gone past the layer shift by the time I saw it so I thought fuck it lol

@tylerkister4628 Год назад

Had this happen with my very first print on my ender 3 pro omg the cat got hit by the nozzle and it tilted the entire print on its side

@jonathonantonio1973 Год назад

@@tylerkister4628 lmaoo that sucks, thankfully my cat has avoided the printer thus far. I think it’s too noisy for her lol

@jacobhuckvale5962 7 месяцев назад

This intro is basically what happened to me with my first printer 😭

@beybiyon Год назад

I have the super racer for two months now.... I have only manage to print 2 models in good shape.... all the rest that of kilos fo filament have gone down the trash can.... how can I now that the timing belts are tight enough or not?

@corahmagneson5591 3 месяца назад

I have a elegoo 4 pro in the middle of a print it keeps wandering from the print to nothing and spitting out filament. Wonder if you could help. Thanks

@buendiasolutions Год назад

I purchased a two tone pla from amazon and the extruder keeps skipping. It only does this for that particular pla brand. I raised the temp up to 230 on the extuder, put the bed at 60 degrees and it still caused the clicking sound. Is there supposed to be higher temperatures for those materials? I am at a loss! I've kept leveling the bed and all other PLAs work. I just removed the two tone and put a single color PLA and it worked just fine.

@Lobo_knows Год назад

Good video

@mattf5998 Год назад

I’m having issues with my prints coming out very brittle … is there a setting I need to adjust to fix this issue? My printer is leveled and prints my boat ,vase,fan with no issues so that tells me there’s a setting that I need to adjust .. TIA. Thank you for the video

@malitarantino 6 месяцев назад

Literally overnighted a reality three under Anne bought a wax resin. Printer and overnight shipped them. Just built them already on my first print. No absolutely nothing I’m good at this. Think I found my calling. 😊

@Print-Tend Год назад

Hey Frank! Great video. What pc/laptop do you use?. My laptop takes for ever to slice a print and in preview mode the rendering is so slow when using the slide bar to see the layers. Regards.

@FranklyBuilt Год назад

I have a very strong gaming PC so it helps a lot.

@Print-Tend Год назад

@@FranklyBuilt yeah I figured it must have a high performing graphics card!. Thanks for the info and keep up the great content!

@braddahr Год назад

Do you use different nozzles - material or sizes? If you do, any nozzle suggestions for the CR10S Pro V2? I discovered, after ordering nozzles 🤦‍♂️, the hot end has unique, smaller?, threads.

@FranklyBuilt Год назад

It’s a mk10 hotend and needs different nozzles yeah

@braddahr Год назад

@@FranklyBuilt wait, do you mean I could search “nozzles for mk10 hot end”? That seems way too easy. Ha ha.

@wyattspop 10 месяцев назад

I need help with a silly problem , I'm building my 2nd Mando helmet, printing my 8th and final piece and the print is the easiest print (back-left-bottom) and it keeps failing in the last 10 minutes not "closing" the top off? I have leveled the bed 3 times, settings seem ok, spool not tight, do you have any suggestions? It's failed to print 4 times now the same part Thanks my friend

@randomblog2479 Год назад

Did you know, that the the color of red used in the Ironman suits is hot rod red? Well at least in the first movie.

@SimonPlatten Год назад

Which printer is your favourite and strongest recommendation? Also just watching your video , a lot of systems still use the FAT file system which is limited to 8.3 file names.

@FranklyBuilt Год назад

I don’t have a particular favorite right now. I just recently did a video comparing a bunch tho

@isimsizoyuncular30orj Месяц назад

How to re attach that white tube???

@chrisriley1203 3 месяца назад

Sir, I have an ender 3 v3 se and it prints good however some times the X axis will stop moving. Y and Z axis still move. what might be the issue I'm at a loss have checked all the belts and bearings to no success. Please help if you can

@taytv52 5 месяцев назад

Taking a break and walking away is a big key I’ve come very close to throwing my printer out the window you just got to walk away sometimes😂

@itachionimaru Год назад

Hey Frank have you ever run into filament that just simply will not run on a printer? My bed is leveled and fully adhesivededed(glued surface). My other rolls print but i cant get this one type to print its Geetech Matte black, any advice?

@crazysportstrivia Год назад

I have had my ended 3 s1 for about 3 months and for some reason I think the 2 axis is falling causing the nozzle to hit my prints and eventually rip it off the build plate, do you have any ideas on how to fix this.

@JessicaCathcart-vb7gj 2 месяца назад

Can you do one on why you prints are coming off the bed?

@rminerman4273 Год назад

Hey Frank, I have an Anycubic Kobra Max with an auto leveling system and a glass bed. I’m trying to print out a daredevil helmet with a raft. The raft keeps printing perfectly, but starts to bend up off the bed once it is finished, causing the whole print to fail. I went and watched your perfect first layer video and still cannot figure it out. Any tips?

@yololyfe1759 Год назад

You could use hairspray or bed glue I use layerneer bed weld glue and haven’t had issues since I got it

@rminerman4273 Год назад

@@yololyfe1759 I ended up using a gluestick and it worked

@anael_64 7 месяцев назад

Question: My 3d printer just won’t print. It will meet all the temperature requirements to print a file but after that it just won’t move or do anything at all and I tried pressing the Pause and Stop option to cancel the print but both are unresponsive, no matter how many times I press them they just don’t do anything. How do I fix it? (I have an Elegoo Neptune 2)

@bigblue1287 Год назад

I remember the days when you started this channel and you say you have to figure certain things out yourself 😉... Congrats on 717 G follows Frank!

@KurtisJoseph Год назад

I keep overhang angle at 70 degrees. Support density at 9-15% tops. Then I add support where it may be needed.

@LydiaHeffel 4 месяца назад

so im new at this 3d printing thing and i just started mine today, i was wondering, if im not using my printer, do i turn it off overnight then turn it on when i use it again? or do i leave it on and take the filament out? ive been looking it up and i cant really find an answer cause its just telling me if i should leave it on while printing. what should i do?

@tulunurang 7 месяцев назад

Hello bro, I got a mismatched 3d print issue. e.g, If I print a 10X10 square, it will come out as 13X13. Tried many slicer but same results. I'm using a generic MKS Tinybee based with Marlin 2.X.X firmware. Any advise? Thanks.

@goatmodegaming Год назад

I struggled with printing for three weeks until I figured out it was a nozzle clog 😂

@benhere9512 Год назад

What if my circuits are fried? Can I replace them or do I have to send it back for repairs? Btw I am using an enter 3 pro

@warped6009 10 месяцев назад

One issue I've had is my fan speed cranks up to 225 speed and temps out the nozzle, I've adjusted the settings on the printer and in Cura but still does it, what is going on?

@InputVerolian Год назад

Hey man setting up the Neptune 3 and the top belt that moves things up and down seems to be to loose...its just clicking instead of moving up and down...

@GarethFrancePT 3 месяца назад

Hi Frank, got given a Cablor 3d printer, having a problem with the hot bed. It won't home when ask it to! It goes to the back and then bangs repeatedly against it and then says "homing failed, please reset." Any ideas?

@BoldCatStudios Год назад

I have a jg maker and I had for over a year I never took anything apart, (feeling like I'm going to ramble on), so I'll get to the point, I think the clear tube is fused to the nozzle and I can't get it out to replace it. so, I think I need to replace the nozzle as well because. I looked for parts, but I can't tell what would be compatible. any advice ?

@andrastorok9094 Год назад

I'm actually struggling with a weird problem. I have an ender 3 v2 and for the past 3 or so months my prints started having these weird stringy blobs everywhere. I'm thinking it could be a retraction problem cause it mostly happens when my printer head stops printing to go to another part of the model. And the top layer sometimes has blobs on top which kinda hook the nozzle and cause the prints to break from the supports or even fall over entirely. I used to have faith in my printer and go to school or whatever while it's working on a 20+ hour print but now I'm scared to even sleep while it's printing.

@WindowsXP781 10 месяцев назад

I need help on my printer it’s a voxelabe one of those cheap ones when e select a model it heats up and it freezes and makes a knocking sound and it restarts is their a way to fix it