This video demonstrate troubleshooting a simple ClusterXL in Active/Down scenario. How to troubleshoot failovers in ClusterXL - supportcontent.... Best Practices - Manual fail-over in ClusterXL - supportcontent....
Thanks for the detailed explanation. Only thing that i have to mention is, please don't use the Microsoft Sam voice anymore! (it makes you fall asleep).
I have a question what if on both gateways different ccp mode(multicast and broadcast).what is the output of cphaprob stat and cphaprob -a if on both gateways
Hi Arun, In case of one member ccp mode set to broadcast and the other to multicast, in version R80.20 and above, the output is below: Member A: ========= [Expert@R80.20_GW1:0]# cphaprob stat Cluster Mode: High Availability (Active Up) with IGMP Membership ID Unique Address Assigned Load State Name 1 (local) 12.0.0.1 0% STANDBY R80.20_GW1 2 12.0.0.2 100% ACTIVE R80.20_GW2 Active PNOTEs: None Last member state change event: Event Code: CLUS-114802 State change: DOWN -> STANDBY Reason for state change: There is already an ACTIVE member in the cluster (member 2) Event time: Tue Feb 4 15:18:30 2020 Cluster failover count: Failover counter: 0 Time of counter reset: Fri Jan 31 10:12:11 2020 (reboot) [Expert@R80.20_GW1:0]# [Expert@R80.20_GW1:0]# cphaprob -a if CCP mode: Manual (Multicast) Required interfaces: 3 Required secured interfaces: 1 eth0 Non-Monitored non sync(non secured) eth1 UP non sync(non secured), multicast eth2 UP sync(secured), multicast eth3 UP non sync(non secured), multicast Virtual cluster interfaces: 2 eth1 10.0.1.150 eth3 13.0.0.10 Member B: ========= [Expert@R80.20_GW2:0]# cphaprob stat Cluster Mode: High Availability (Active Up) with IGMP Membership ID Unique Address Assigned Load State Name 1 12.0.0.1 0% STANDBY R80.20_GW1 2 (local) 12.0.0.2 100% ACTIVE R80.20_GW2 Active PNOTEs: None Last member state change event: Event Code: CLUS-114904 State change: ACTIVE(!) -> ACTIVE Reason for state change: Reason for ACTIVE! alert has been resolved Event time: Tue Feb 4 15:18:30 2020 Cluster failover count: Failover counter: 0 Time of counter reset: Fri Jan 31 10:12:11 2020 (reboot) [Expert@R80.20_GW2:0]# [Expert@R80.20_GW2:0]# cphaprob -a if CCP mode: Manual (Broadcast) Required interfaces: 3 Required secured interfaces: 1 eth0 Non-Monitored non sync(non secured) eth1 UP non sync(non secured), broadcast eth2 UP sync(secured), broadcast eth3 UP non sync(non secured), broadcast Virtual cluster interfaces: 2 eth1 10.0.1.150 eth3 13.0.0.10 Best Regards
Awesome video and command is very useful while troubleshooing....you are awesome as always nice way to explain..everything is awesome...if possible share me your email id ...i will ask more question