I have a graco 490, when i turn it on and it does nothing just the light D20 turns on and after a while it turns off. Is there any way you can tell me whats wrong with it?
Taking my old Graco Ultimate MX 695 pressure control apart when the cover plate came off two wires came off. The wires are black and white. The three receptacles are labeled, L1, L2, and Looks like J11. Can anyone tell me where the black and white wires go? I have a photo but can't post it here. Thanks
I have 795 graco.. I got E03 on screen.. I change the transducer.the fault E03 is disapear. But My problem now is the machine continue pressuering whitout stop.also i change the drain valve ..still not fixed. Can you advice pls?
Idk man. I have a gas powered 5900 and the only thing that goes bad periodically is the packing. I spray the sewers with a paint/pesticide mix. The rig is bolted to the back of the truck. This includes being on steep inclines and a lot of rough off-road stuff. The rig generally runs 8~36 hours straight. In 4 years and 43k gallons of material I've only replaced the packing twice, piston rod once and now the transducer(snapped bouncing around off-road). This is all while sitting in the hot AZ sun.
This is the least helpful tutorial I've ever seen. Think the transducer is busted? Step one, buy a transducer 🤣😭 Side note: I actually have an extra transducer to test it with. But I think your average painter would not have a machine graveyard