Troubleshooting Your Downstream Injector: Why It Won't Suck Bleach

Подписаться 49 тыс.

Просмотров 1,4 тыс.

50% 1

Troubleshooting Your Downstream Injector: Why It Won't Suck BleaBleach?
This video addresses common issues that prevent a downstream injector from suctioning bleach effectively, shared during a training session. Reasons include improper orientation of the injector indicated by an arrow, the use of wrong size tips, and the effects of too much pressure leading to friction loss, which in turn affects the injector's performance. Other potential problems discussed include kinked hoses and faulty pressure washing guns.
The video also explains how downstream injectors work, utilizing atmospheric pressure and flow dynamics, and counters the myth that they can't be used for soft washing.
Practical tips and a step-by-step guide on identifying and rectifying these issues are provided to ensure effective operation of downstream injectors.
00:00 Introduction to Downstreaming Troubleshooting
01:07 Understanding How a Downstreamer Works
02:22 Common Issues and Fixes for Downstreamers
05:39 Additional Problems and Solutions
07:48 Concluding Tips and Encouragement
Want to learn how to start and grow your pressure washing business?
Online
www.kingofpressurewash.com
In-Person Class
www.pressurewashhelp.com/inpe...
All the resources to run a successful pressure washing business
www.kingofpressurewash.com/re...

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 13

@j.d.williams6882 20 дней назад

Great video, this is going to help a lot of newer washers. I had to replace a hose a few months ago for the same thing you explained. Cheers

@brandonhodge0311 Месяц назад

Thanks for the info! Pretty new soft wash business here. Elite Wash Services LLC in Indiana

@Medomsley Месяц назад

Great videos Jason, keep them coming! Got to ask when is the long goatee coming back again? Was always a great look.

@brosiahshowdoi3765 3 месяца назад

Thanks!

@kingofpressurewash 2 месяца назад

Thank you for taking the time to watch and comment!

@tyriceholliday4151 Месяц назад

Just got into DS I stared off using a 2.5 gpm for practice. I brought the correct DS for the 2.5. I made sure it’s flowing with the water. When I place it into the bucket with water on and psi not attached THERES FLOW I can see the soap water flowing and bucket going down. when I attach the psi hose there is still flow from the bucket to the DS into the hose. Once I attach the gun to the hose no flow. this is all while the washer is off. There’s no flow with the. I removed the tip and still no flow from the bucket. Yes the water has been on all the time I’m thinking it’s the gun but here’s the kicker I added a ball valve and there’s still no flow. I’m confused

@AmericasFavoriteLawnBoy 3 месяца назад

Awesome

@kingofpressurewash 2 месяца назад

Your support means the world to me!

@dramslife 3 месяца назад

Great video sir! I had a question regarding sealing concrete. When sealing should you clean the concrete normally with a post treatment and then apply the sealant? I did some testing and the SH seemed to make the sealant turn a little milky. Not sure if it was concrete temp or my post treatment was too hot. Thanks!!

@kingofpressurewash 2 месяца назад

Yes, I would not put a SH down after you clean it and before you seal it. Because it's gonna cause your problems.

@MedinasProWashSolutions 3 месяца назад

Thanks for this video. I am still currently trying to figure out why my setup won’t pull chem through injector. I’ve checked the injector spring and ball, changed it, manipulated the loader (I have a pressure gauge so I can see the pressure changing on the outlet of the machine)… I just cannot get it… I’m going to try another Jrod next

@kingofpressurewash 2 месяца назад

Will it pull with no gun on it?

@MedinasProWashSolutions 2 месяца назад

So i put the downstream hose inside a big clear bowl and I took the whipline off of the hose reel… I started the machine and the injector pulled all the liquid out of the Tupperware bowl with the whipline not tied into the hose reel. I put the whipline back on the hose reel and no luck. Also, sometimes I have liquid flowing backwards and OUT of the nipple of the downstream injector. It’s a real pain in the butt why I can’t get this thing to work properly