Truck engine assemble| full engine fitting| heavy vehicle Engine 

🤣🤣🤣

⁸

Only the people from america and europe, because they are rich asf so they have garages for that

@@allenvictor6114 the that

Even showroom people sends the vehicles that they can't get repaired perfectly to a roadside workshops for very less cost and showroom people charges very huge amount to the customers.

Какой ты не понятливый . Они сняли мотор что бы помыть и то это сделали плохо .

Sure, sure....

Tata engine

कमसे कम साफ सफाई का तो ध्यान रखो

@@maheshnambidi tata make only chassis bro engine is from another brand called cummins gearbox usually in tata is of brand named zf and even the new bogie type suspension in newly launched mining tipper of tata comes from hendrickson

@@nikhilmishra1081 yes. Unfortunately Indian companies are not competent for the same.

you should go work with them

I wouldn't say well done! You NEVER put main bearings in dry, same with rod bearings. They put the main bearing caps on without lube on the bearings, which will cause premature bearing failure, not to mention they never followed a torque sequence for the crankshaft. You NEVER tighten any bolts from the ends first, always start in the middle & work out! That goes for crankshaft, heads, valve covers & oil pan! Sure they got the job done, but it was NOT "well done"!

@@timothygeiger8271 he wiped oil on the bottom bearing 😶

@@ronalddaub7965 you need more than just the bottom bearing done, besides on a rebuild it's best to use assembly lube, it stays on the bearings, & you never want a dry initial start-up after an overhaul. Oil is good after the engine is running, but its best to use a lubricant that sticks to surfaces for initial start-up, after an engine has been rebuilt. They didn't torque anything, which isn't good either.

They may not have access to all the lubricant you have , but likely there skill and bad habits have been handed down , there no school to go to , you start working as a young kid for you father and grandfather.

It's good for business...🤣😂🤣😁😁😁😁👍🏽

Job security

The best way of ensuring the customer soon returning for yet another rebuild !

sand 🤣

Está mal ese lugar para ese trabajo no quedará bien el motor

That's going to be 30 rupees please!!!!!!! Thank you come again........ LoL LoL LoL 😂

Aa

@@siatunsupriono7158 n Ko in

And they will sell them by end of day for buying local booze ☠

It is old, low HP per liter engine - it will work fine. However try to do it with the modern one - it will be destroyed in no time.

It's not enough to matter on a bearing that size.

India

Yea its a very dirty rebuild

@@charliemclaughlin1042 not to mention, *without a torque wrench* lol

Yes now look like lucky 😂 but summer you can't manege here 48°C so in summer you are lucky

@@UniqueThings18 great comment 👍 👌

Well din ooo

you should go work with them

This comment didn't age too well

lqa

q in

Exactly because they were'nt working on a car to begin with lol

It's like giving a new life to dead engine Curing a sick machine Just like doctors They do it on human and mechanical workers are doing it on machine.

you should go work with them

@@RoverWaters what tf were u thinking when replying with this? 🤣

You think that was amazing? They slapped that engine together without regards to cleanliness, they never lubricated the crankshaft main bearings, or the rod bearings, they didn't torque the main bearing caps, or the rod bearings. That engine is going to fail prematurely because it was assembled without lubrication, & was never torqued. An overhaul on a truck engine takes a good mechanic close to a week, when its done CORRECT! These guys cut so many corners, they didn't lubricate anything going back together, then the tightening sequence on the main caps was just horrible! Never work from the ends, always tighten from the middle out & torque the bolts! Who knows how long that engine will last, but you can bet on one thing, it will be a miracle if it lasts longer than a year or two.

@@RoverWaters 😂😂

Nut bolts uneven tight hue hai pnumatic spanner se karna chahiye equally fit karta hai sab 😐

Right? These engines will just be shitty after the rebuild... They are doin it on a dusty road and tightening the screws to their own satisfaction... Are these engines some kind of toy? Need everything to be precise and perfect so that engine can operate optimally.. Lolol.. If any company engine builders see this they will have an aneurysm..

Me too . they have an Answer to anything. And just keep moving forward.

Песок и пыль- есть смазка))))

Lè degaman moteur dti international bay anpil lafimin kikoz

@@madlad8629 wrong

даже на видео видно износ в гильзах

Did they spray paint the top of the pistons??

Work with the ft manual

Passa óleo na dedada também?

Video plz

Good job 👍

это шляпа

У нас пол страны так ремонтируется.

It’s a 3rd world country. The have basic tooling at best, do you have any idea how poor some of these people are and you’re talking about using a toque wrench. The do the best with what the have, fair play to them I say.

@@niallcosgrove5596 yes exactly....

I know hacks it's good enough for 100k lol dirt is the best thing for a motor so called rebuild..just use the old cleaned up bearings...new rings don't hone out the holes just put them right in ...thire ware right in np just oil them up run it change the oil down the road

Only has one bearing on the cam

@@madlad8629 The problem is that's not the way to do it get organized get a clean fucking environment there's nothing to brag about here there's nothing to be proud of here this is a fucking hack job

You would think they could fabricate one right? So much things that can go wrong with the intall with that pipe...

I want to know too lol

Three days maximum bro

This engine's already 150 hp with a 650 nm torque Cummins engine. For a big 10 wheeler, it must have a torque of 1000 nm for good performance.

You noticed the same things i did. A dry engine, a crankshaft that doesn't turn freely, not torqued, no regard to tightening sequence, that engine will have premature failure, & its going to be sooner than anyone thinks.

@CarMechanicBolte no doubt they have lots of experience! When you do a mediocre job, & have to do the same thing multiple times, you get a little experience doing it. As far as torque wrenches & specialty tools, maybe that's why they got so much experience.

I'd like to know better 😉👍

sim, nós somos assim ✊

Brasil 🤏🤢

че потрясного? в говне собрали двс , в писке, без моментов крутят, распред вал просто забросил в блок. Те кто считает такой ремонт гениальностью в авто технике полные олени))))))