Trying to solve the ignition problem on my 1927 Model T Hotrod

Подписаться 165 тыс.

Просмотров 35 тыс.

50% 1

In the video Karl and I work on my 27 Ford model T and remove the pertronix ignition and install points as I though the ignition was the problem fir the car running bad.
Channel sponsors
Welders from America HTP USAWeld Inc. usaweld.com/
FastCut CNC www.fastcutcnc.com/
KBC TOOLS www.kbctools.ca/
Wildfire Lifts www.wildfirelifts.com/
Music by Epidemic Sound
Music By RU-vid
Drive In - TrackTribe
Funky Good Time - Doug Maxwell_Media Right Productions
Telepathic Drive - Unicorn Heads
Check out our second channel More Halfass Kustoms the other half
/ halfasskustomstheother...
Drop Pablo or Brent a line: brent @ halfasskustoms.com
Instagram: / halfasskustoms
Facebook: / halfasskustoms.56
Website: halfasskustoms.com/
Merch: halfass-kustoms.myspreadshop....
Ship us things if you wish:
Halfass Kustoms
20 Brandt street, Unit 3
Suite #103
Steinbach Manitoba Canada
R5G 1Y2

Авто/Мото

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 244

@williamtrusler1508 2 дня назад

It’s always a great time when Karl comes to visit! What a good pal.

@dougpeak7591 2 дня назад

Brent it’s great to Karl at your shop !That model t is cool ! I think it needs a haircut. Maybe you and Karl can give it alittle chop

@WilliamPhillips65-69 2 дня назад

You two could have a comedy show. I love the back and forth of you two in the shop. Reminds me of a time years ago when I worked with a crew of machinists in an automotive machine shop, that built engines from farm trucks to funny cars, dirt track rigs. street rods, and tractors. Thanks for the memories.

@mixerman1 День назад

You and Karl are like ☯ you compliment each so well. You know the funny thing is you guys probably hooked up because of the old tube here. It was nice to see Esther pop in. I feel like Buddy is like me in his older age, he looked a lot more chipper without the cold of winter. It always seems like Pablo is smiling when you go for a boot. I want to thank you all for the great content and I'll catch you on the next one..later!!

@TheDistur 2 дня назад

Honestly it's nice to see one that isn't chopped.

@HalfassKustoms 2 дня назад

Haha to easy

@Mr2oldiron 2 дня назад

Dwell is the number of degrees the point are CLOSED. Uniset points are usually preset, you install them and then start the engine. To use a dwell meter you you hook it the distributor side of the coil (usually the negative side) and ground. Your dwell reading is usually on a small block Chevy is 28-32 degrees. I always tried to get it at 30 running. That’s why the distributor cap has the door in it is so you can adjust the points running. You should your multimeters because some of them have a dwell meter function built in to them. Always set your dwell first because for every degree of dwell change, you change timing 2 degrees.

@alanpaulick7815 2 дня назад

What happy video with Brent Ester and Karl. Thanks for sharing good friends hanging out.

@lewiskemp5893 2 дня назад

Best thing about Karl is I found Brent through him. I love both channels and the best is both of them together 😊

@canadareals День назад

I loved the little door on the GM distributer caps. Hook up your dwell meter, start'r up, raise the little door, insert your allen wrench, set your dwell to the perfect reading. Done in a coupl'a minutes.

@dinga11128 2 дня назад

You connect the dwell meter + ti the - side of the coil and the other to ground and set the points to 30 on the meter with the motor running and you're done.

@1208bug 2 дня назад

This was a lot of fun Brent and Karl! 😎👍

@jasonseal2692 День назад

I always set points with a dwell meter. As the center “cam” wears out your end gap setting will change. Get the dwell setting to 30 and run it. Love the channel, both of the channels.

@davidhatch2558 2 дня назад

Nice to see your 27 running properly again Brent. Thanks for the video

@donames6941 2 дня назад

One thing i see is a ballast resistor, and if that coil is a 12 vote one,(with a intrunel risistor ) you may not need the ballast witch lower you votes more cause a weak fire at the plugs causing a rich mix

@dennisplace2641 2 дня назад

No ballast resitor on petronix........

@glennnickerson8438 2 дня назад

I have to run a ballast resistor with my Pertronix. Someone said I didn't need it, disconnected it and ten minutes later poof Put a new one in with the resistor 18 yrs ago, never a problem!😉

@craigwalker4211 2 дня назад

Electric tonic ignition needs 12v while points is 9v with a ballast resistor.

@ArthurParker-xr6qu 2 дня назад

Brent.. I love to see you and karl get together….awesome content today..keep up the great work 😊😊

@lsdevenie1426 День назад

Better than anything on TV, Awesome watching you two “work” together

@murtkirby9725 2 дня назад

Glad to see Buddy making a cameo appearance. Great video.

@born2soon 2 дня назад

The local hardware store in our town had a huge sign like that. When they went out of business someone bought the sign for $10,000 and sold it on Mecum Auction for $37,400.00!

@Slingshotgixxer 2 дня назад

That Roadster is unbelievably cool , just looks amazing

@N-Scale 2 дня назад

Those look cool cruising together !!!

@johnpassmore8176 Час назад

Great video with you and carl. Trust this 66 yr old. You teach and explain things well. Been a mech. Body man and hotrodder all my life and dont claim to know anything but willing to help out. Sorry late on the comments but never miss a video.

@donaldhalls2189 День назад

It looked like a great day hanging with a mate, and cruising, in beautiful weather, thanks for sharing, all the best to yous and your loved ones

@farmerbaker 2 дня назад

Pertronics like a full 12 volts all the time, found out the hard way so no need for the ballast resister

@TrendsbySterling 2 дня назад

Very cool to see you two guys hanging out and having fun working on stuff Brent!

@craigbowley6783 2 дня назад

Pablo is just living his best life 😁

@moto50forReal 2 дня назад

I Just loved watching those two cars rolling down the road at the end there

@stuartfletcher2378 2 дня назад

Thank you both for a superb video , between the two of you anything and everything is possible . I could never get enough of your prize winning knowledge and sparky humor . Till we get together next time , May the best of life be yours , Stuart in Ontario ..

@IEchuckie День назад

Sparky humor? Is that 16 or 32 gap humor 😅

@SPUDHOME 2 дня назад

60 years ago dad taught me, {match book}. Don’t use a feeler gage. The oil on the gauge would get on the points and burn them out faster. Also don’t use a point file, same reason, use new clean emery cloth. Match book always worked.

@briankinnear7461 День назад

Love these videos with you and Karl doing stuff together. Informative and a helluva lot of fun. Look forward to more. Be safe and stay well.

@robertbennett9243 2 дня назад

You and Karl are such best friends. You two can find funny in anything. Good video. Pablo was looking at the 27 like "who is driving my 27?". I learned about points and setting a dist. right.

@terryeustice5399 2 дня назад

A fun video Brent and Karl. Good people good times. Thanks for sharing! 💯👊👍💕

@buckeyejim2989 2 дня назад

🗿💨them uni-pounts was bad right outta the box ,at times. Only 1974 GM used em but it was easier for the diy er to loosen two bolts instead of three. Or if someone lost a point mounting bolt , guys would use the uni-points because it required two without a condenser mount screw. Enjoying the collaboration 👍 thanks for sharing ✌️

@floydt2029 2 дня назад

Yes Karl, when your closer to the neon sign, I can here it click. Look like a good time with Brent and Karl!

@rogercamp6071 2 дня назад

A pair of old school hot rods-love it!!

@jerrybickes7957 2 дня назад

Yes we can hear the click of the sign. Have a great week guys.

@harrytaylor6854 2 дня назад

Very good one that is another reason why i stuck with the small bock chev ..Well done guys great to have Karl down here

@Mr.Avuncular 2 дня назад

Brent. You are correct !! The door yes dwell access!!! Also get a handheld vaccumn gun couple sqeezes while hooked up to module would confirm that itz working😘😁👍👍🤠

@roberthocking9138 2 дня назад

What a sight those 2 rods made in that beautiful countryside. Nice job

@RandyH-qf3dc 2 дня назад

Used to have a dwell meter. Those gm widow cap, one piece points and condeser coupled with a dwell meter made a tune up easy. Enjoyed this video Brent.

@keonikaig9247 2 дня назад

That waz lots of fun...so nice to have your own parts YARD... GRRAT to c you and Karl out for a spin...keep well 👍🤠 Pablo looked great ride'n along... 🐶

@stew6338 2 дня назад

Setting the dwell is the most accurate way to set points. The smaller the points gap the bigger the dwell is. I know your viewers are now going to send you dwell meters. 😆Cheers Stew

@alexanderalejo5708 2 дня назад

Yeahhhhh! MAKE IT HALFASS collab.

@asacatholic1380 2 дня назад

Troubleshooting! A lot of it is physical learning. Thanks for demonstrating the process!

@oh8wingman 2 дня назад

For points gap you can use a Canadian dime if need be. When newly minted they are 0.020" thick. Years ago when points were still the standard ignition I had a dome with a hole drilled in it and I kept it on my key chain. A dime will also work on old Harleys as they ran GM point assemblies.

@notajp 2 дня назад

Usually, if a Pertronix unit fails, you lose spark entirely. And yes, if you are going to run points, you need a dwell meter. Hook up the dwell meter, then use the Allen wrench to adjust the point gap to set the dwell to spec. We used to do that all the time….

@catman19 День назад

Hi Brent,,first set points at 30-32 dwell then set timing.

@SPUDHOME 2 дня назад

I love the learning, especially about a problem you will never see again. Ben there done that. LOL

@stevesalvage1089 2 дня назад

Iv gone back to points on all my classics, spare condenser is all you need to take with you , points will always get you home, simple ,

@lynnmccurdythehdmmrc2561 2 дня назад

Been a long time since I turned wrenches but do remember the "window" in the Dist Cap and adjusting the points with an allen wrench.

@ronbunker5778 2 дня назад

You two make it real! Thanks for sharing your video.

@mikemullay5622 2 дня назад

Points and condenser and rotor are all I have ever used in my vintage cars, most recently Buicks. I agree, keep it simple.

@IEchuckie День назад

I like this video. It's making me feel better about how I work on my toys. I'm not the only one 😅

@BL-eu8fo 2 дня назад

This video was so much fun, thank you guys. you made me laugh the all way! It's great to see you just having good times!

@larrybailey43 2 дня назад

Enjoying your shows !

@SStudiopro 2 дня назад

Use a dwell meter and the dwell is 28 to 32

@danielboughton3624 2 дня назад

Haven't done one in a long long time but I was thinking .16 for the gap and 30 for the dwell. I guess I remembered about right. Now they just need the little tool to reach around everything when the distributor is in place. I think I have one in my toolbox.

@jameslewry2950 2 дня назад

G'day big fella, sitting in hospital, you're keeping me motivated, thanks mate. Hooroo se ya later 👍

@whatsoutthere6822 2 дня назад

Dwell changes timing so, it's best to set the dwell first then set timing.

@jackmehoff2961 2 дня назад

Minty ! Thank You for sharing your video, and letting us hang out . Later ...

@tstuart7333 2 дня назад

1927 Jidder Bug. Which is looking real super.

@CSmith-oz4wp 2 дня назад

Bring the Buick into the shop, it’s time for “flame on” and go for a burn. Great video I learned something every time I watch.

@hooligan_56labelle22 2 дня назад

Ahhh. Those daring young men in their jaunty jelopy.

@tday99music День назад

Please rename this video how to make an old car old again, lol. Great stuff as always!

@kirkoglesby6175 2 дня назад

Mallory unilight is what I ran in my 302 and that thing ran awesome.

@markmclellon8516 2 дня назад

A Buddy video, Brent n Karl, T n roadster, Pablo n Brent.

@grahamparr3933 День назад

In my early years motoring, you could get home with a screwdriver, pair of pliers, a small hammer, a lug wrench, and a roll of electric tape.

@obsessive_doka_disorder День назад

You two goof so well together 👍🏻🙃

@portsboy1 2 дня назад

I'm gonna say that old school ballast resistor is kaput

@marksteinhorst5855 2 дня назад

Not supposed to use ballast resistor with pertronix

@SuperDave-xs6pt День назад

One of your buddies has a dwell meter. Get it, set the point dwell to 30 degrees, then set timing. Good luck

@AndrewGeorge-ig1fn 2 дня назад

I would like to see all your cars out lined up. I really like the t and the roadster. I like how there just together and drive. Not some finished full paint cars

@randywaldrep8482 2 дня назад

Sadly, I've had the issue where the Distributor housing was worn out on my 1970 Nove back in the day. I was 19 years old and did know a lot about it. I would set them, and they would stick it was wallowed out It took an older guy that was watching me struggle to figure it out.

@crbrepairmotorcycles6608 2 дня назад

I remember sears/craftsman made a points and dwell meter gauge to help set them

@jman6030 2 дня назад

Love it when you guys get together..good times eh lol 👌

@Bman2020 2 дня назад

What a great watch guys it has been real good watching your last videos the old points and condenser was my thing lol easy file reset gap life was good again simple thanks for sharing your time together 👍👋🇨🇦

@johnkranz4004 2 дня назад

Very KOOL Video Brent and Karl

@rickyfulks6656 2 дня назад

Red lead on meter goes to negative on coil,n of course black to ground,set at 30 degrees Brent

@glennnickerson8438 2 дня назад

Oh to have that problem-- I have to look at the registration to figure out the year. To many cars Brent!😆

@geoffreymills9932 2 дня назад

GM is .019, dwell is 30-35 degrees and yes, the points feed from the negative side of the coil, you can also drop the distributor in the right location and turn the crank by hand until it drops onto the oil pump shaft, and never set the timing with the vacuum advance hooked up

@danielkoch6815 2 дня назад

Back in the day, I always set any set of points at .017", then check it with a dwell meter and I ALWAYS had 32 degrees of dwell! .017" is the ticket!

@kenanger6877 2 дня назад

Happy 4 th you guys! Enjoy watching you work on the old stuff!

@thomasputnam4491 2 дня назад

When you put the Allen wrench in the window and hit the points they will change just from the wrench that's why you need a dwell meter I'd give you one I have 2 of them .just readjust the points with the wrench and keep reveing it until it's good like setting the timeing without a light

@jimmyford796 2 дня назад

I’ve had 2 61 chevys with 283 in them and both had the little door on the distributor cap for adjusting the points.

@bass60guy 2 дня назад

In the states, we called that floating axle application, a suicide front end.

@milwaukeeroadjim9253 2 дня назад

Had points and condensers in several of my early cars and in my Honda motorcycles. Remember filing and setting points like it was yesterday.

@kenfrazier616 2 дня назад

I still have a dwell in the tool box kinda nice to use

@EvanHofmeyer 2 дня назад

Jup. Nothing beats oldschool hey. It just works. Always has. Always will.

@jonpeters2700 2 дня назад

In order to set your points by dwell, you need to connect a dwell meter to the engine, start it and adjust the dwell with an Allen wrench or a screwdriver that has an Allen wrench end on it. They used to make a special screwdriver that had a spring made into the shaft that came with the Allen wrench end made just for that purpose. You will watch your meter and as you turn the screw to adjust the points the needle will move showing that the dwell is changing. Sometimes you could adjust the points by gap, but the dwell will not be right, it is always better to adjust them by dwell.

@rickyfulks6656 2 дня назад

The dwell setting is 30 degrees,I'll never forget old school stuff.

@born2soon 2 дня назад

I remember setting the dwell on my first car, 1966 Chevy Bel Air 283, at 30 degrees and idle at 650. Sweet engine that didn't burn a drop of oil. Summer of '72.

@mikerios5184 День назад

WHAT A GREAT TEAN 👍

@donh8973 День назад

Cool nice ride😊

@dthanson56621 2 дня назад

Dwell meter hooks to coil,pos to pos,neg to neg,and dwell on 8 cylinder setting,a V8 gm dwell is 28 to 32,I usually set at 30.

@ineverhadthemoney7857 15 часов назад

you could replace the springs to stay on your power curve for output on R.P.M.

@randyhughes5160 2 дня назад

My 69 Chevy truck had that and I had a box that had timing and dwell you could open the door and set the dwell then you sprayed it with silicone to help water proof it

@larrylilly2552 2 дня назад

Boy your making me feel old now, I have a dwell meter and always used it on GM point systems years ago.

@Wrenchen-with-Darren 2 дня назад

Always nice to see what you're up to.

@MarqusReyes-yi4ww 2 дня назад

I always got my distributors out of 1977 Camaros electronic ignition system easy hook up

@professorfalken4600 2 дня назад

Nice project

@garoldpeterson3433 День назад

They made a speedometer cable style Allen head screwdriver for adjusting the points.

@AndrewHCann 2 дня назад

Excellent video Brent :) , Ester :) , Karl :) yes all Canadian Tire years ago in 30 mins drive in my areas had all tune for GM , Ford , Chrysler , Plymouth, Dodge , have all parts fix up in farm , personal, business vechiles and if need order in they would if available and phone tell pick up! But sadly all changes even NAPA Auto parts used do to and some Hardware store or corner stores had fuel stations too ! Yes that good old days and plus shop sign in shop click I hear too but some people talk or other has noise it get blank out what guys asked!

@J20J20 10 часов назад

Such a rad car

@TairnKA 2 дня назад

Bret is the talent, Carl is the1st unit camera, the static camera is the 2nd unit camera and Ester is the guest star, doing a cameo? ;-D I've suggested this before, I'd move the sign (20:32) to the wall by the stairs (more storage space). Good luck finding a matchbook? ;-)