This video was very helpful as the Tuffy instructions are minimal. Let me add a few comments about installing in a TJ. 1) As Tuffy says, the drawer will fit in a TJ but not with the back seat. You can leave the back seat in, folded up. I chose to leave it in so that I didn't have to store it somewhere, but it is wasted space. There's about 2" space between the folded-up seat and the forward end of the drawer. 2) The back seat aft catches do have to be removed. The bolts will be re-installed through the drawer mount, but the brackets are left out. 3) Remove all the seat belt hardware for the back seat. The Tuffy instructions say the seat belt bolts on each side of the tub will be re-used, but the shoulder on those bolts won't fit through the holes in the drawer mount. Fortunately Tuffy provides replacement bolts that work just fine. Re-install the center buckle bolt, to fill the hole. 4) The Tuffy instructions talk about bolting on the left and right panels before putting it into the jeep. But with both panels on it won't fit in through the back. Turns out you can bolt on one or both of the panels with the drawer enclosure in the jeep, just lift up one side to access the bolts.
