TUNING AN RX7 ULTRA - SWAPING SHIMS - BOW BUILD RX7

Подписаться 13 тыс.

Просмотров 8 тыс.

50% 1

haxenhunt.com/
BUY A HAT WIN A BOW
BUY A HAT: haxenhunt.com/collections/hax...
HAXENHUNT MERCH : haxenhunt.com/
SAVE 20% ON ALL MTN OPS PRODUCTS, USE CODE "HAXEN" mtnops.com/
SAVE 10% ON CANVAS CUTTER BEDROLLS, USE CODE "HAXEN" canvascutter.com/
INSTAGRAM! - / haxenhunt
Peaked Out Adventures youtube: / @peakedoutadventures
Trying to tune my Rx7 Ultra was kind of a nightmare, trying to figure out what shims we need to be swapping out, and how to build the rx7 to my liking.
the bow ended up being a little out of spec which caused for us needing to adjust the timing of the cams, and to change the center shot by swapping shims on the lower axle.
overall I give the hoyt rx7 ultra a 6/10 for tunability after owning it for a couple years.
appreciate your support! Go subscribe!
Shop for gear I use for my videos!
The camera I use is the Canon 80D - amzn.to/2RevJzW
Tripod - amzn.to/2PjstjX
Fletchings I Shoot - amzn.to/2YblvBz
Release I shoot - amzn.to/33HEDby
Arrows I shoot - amzn.to/33J9Wmz
For Business Inquiries please contact me at
Haxenhunt@gmail.com

Опубликовано:

7 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@JOB107 11 месяцев назад

If you use a Prusik Knot on the cord of a Hamskea rest it can be loosened and retightened in seconds with no tools.

@sinepari9160 11 месяцев назад

It's good to have a buddy with a home shop and all the required expensive tools. Better than waiting behind 20 people trying to shoot their trads on the range at the LBS :)

@wcwcgarner2717 11 месяцев назад

That sucks

@glenncharles6622 11 месяцев назад

Great tune video. Thanks! I have two VTM’s, one with the Hamskea and one with the QAD. I like features from both of them, but in the end, I like the QAD a touch better because of the rest being up and then dropping away.

@wcwcgarner2717 11 месяцев назад

Nice tech video. I like videos that show me how to fix things

@newzealandspotlightersasso9181 11 месяцев назад

Bowtech deadcam limb system enters the chat 😅

@CoachGoodwin23 11 месяцев назад

Excellent content. Love the bow tuning tips. Thanks guys!

@brucehillbillybarthalow3786 11 месяцев назад

Great video and thank you for the information

@dryflyonly1 11 месяцев назад

I only use walk back and french tune fp/bh.. Never paper tune or shims

@chengsterboi07 11 месяцев назад

I will still always broadhead tune my bow. If I can shoot fix blade as accurate as my field points then I can shoot any mechanical head

@kylemacdonell1450 10 месяцев назад

Anybody going to talk about him walking past the draw loaded arrow bow LMFAO

@HaxenHunt 10 месяцев назад

🤦🏽‍♂️🤦🏽‍♂️ for reals hahaha was waaaay too distracted filming lolz

@TheDadHuntCo. 11 месяцев назад

🔥🔥🔥

@darnellwatkins4031 11 месяцев назад

Bowte… I’m not going to say it. Good video, sick bow and sorry for the headache. Atleast you got homie with a basement shop.

@CharlieNDaTree 11 месяцев назад

Can we get a close up of what he was mentioning about the cable from the QAD rest?

@sinepari9160 11 месяцев назад

He uses a slip knot and a little serving to keep it centered.

@l.i.archer5379 11 месяцев назад

FYI, the LCA drawboard attachment doesn't give you a true reading of your cam timing, because the bow isn't perfectly vertical. The drawboard kicks the bottom of the bow further forward than the top of the bow, essentially tilting the bow backwards. If you pushed the bottom of the bow backwards until the top and bottom of the bow are even, you'll see the drawstops change positions in relation to their cables.

@kylemacdonell1450 10 месяцев назад

What ?? , nobody here understands what you are trying to say.. There is ZERO reason for the bow to be vertical.. Often draw boards on total horizontal

@l.i.archer5379 10 месяцев назад

@@kylemacdonell1450 wanna bet the bow not being vertical when drawn back throws off the cam timings?? And just because YOU didn't understand the technicalities of what I said, doesn't make it less true.

@gandalf2256 Месяц назад

Dumbest thing I've ever heard@@l.i.archer5379

@joeditz48 10 месяцев назад

I can't stand shims and top hats for adjusting cam lean

@justmeva 11 месяцев назад

I have QAD Rests on all my bows... I have no desire at this point to change to something else.

@PhatBassesTV 10 месяцев назад

Hey dad

@michaelbushey2787 11 месяцев назад

This video right here, is why i have switched to bowtech. Its so much easier to tune. It would have been shooting bullet holes with 3 shots. But the rx7 is one of the nest bows ever built imo.