Turbo 2012 V6 CTS 3.6 LFX

Подписаться 91

50% 1

How I turbocharged my 2012 CTS coupe 3.6 LFX. I don’t see to much info out there so I thought I would share what I have so far. Any questions feel free to ask.
45mm WG
t76 with .68 BH
12-15 Zl1 fuel pump
31”x12” intercooler 4” core 3” I/O
GM content sensor
ZR1 MAP - 3 bar
Zl1 pump intank
Break out baro from maf
Stock GM E39 ecu tuned with HPtuners
Missing costs from this like tools, welding wire, cutting/grinder disks, drill bits/taps, scrapped exhaust ideas, tuning (shoutout to ⁠⁠⁠‪@thatturbotruck‬) & a lot of time. The power estimates are with losing/not maintaining rail pressure with the stock HPFP.

Опубликовано:

19 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@tirecchatman547 2 месяца назад

Let's see it running

@slowLFX 2 месяца назад

Just click the channel it should show some shorts & a recent video of going to the track

@BESTONYOUTUBE898 4 месяца назад

Nice

@sonofaglicth3332 4 месяца назад

Nice ats

@slowLFX 4 месяца назад

Poor boy ATS-V lol

@ICYG69 6 дней назад

Excellent video very limited knowledge for the LFX engine. Currently I’m in the same boat doing my own research doing a turbo on the Camaro currently have e85 but still need to figure out the exhaust manifold and piping for the turbo. Just recently I came across a site that sells LFX flange elbows planning on cutting those and running them to the turbo and life a little easier. How did you do your exhaust?

@slowLFX 6 дней назад

@@ICYG69 Thankyou, yeah I found it kinda difficult to find an at home style build to find information from. I cut the original flanges off the stock exhaust & used 2 1/4” up beside the head on both sides then the big piece that can be seen on top with Vbands connecting it all together. Downpipe runs along the front of the motor down to the passenger side then cuts back between the motor mount & motor where the stock cats would sit then just goes to the back of the car. I’m not sure how much different the Camaro bay is, but if you are okay with a hood dump you can run your exhaust around the bottom side then Y up to like between the timing cover & Efans. I’m going to eventually switch the hotside up some to run under the car with a hood dump probably when I do the converter & have it all out to record it.

@SleepyCrane-ls5db Месяц назад

Yo I need your help with mines it's in limp mode after loosing keys locksmith cut me a new one but it still didn't start just cramked

@slowLFX Месяц назад

Does it have a CEL? if so run the codes there may be another issue. If it’s a coupe try putting the key in the center console

@SleepyCrane-ls5db Месяц назад

@@slowLFX it's a 2011 CTS sedan 3.0 I think the ECU needs to be releaned alone with new key and fob,that's when it started after I lost both and went messing with steering column,you know screwdriver thing.

@SleepyCrane-ls5db Месяц назад

@@slowLFX yoo keep going I want to see you push like at least 650 plus if it can.its like your the Cadillac 2nd Gen Christ.