Тёмный

TURBO LAMIK 8HP70 NISSAN S15 SILVIA IS FINALLY DONE! 

Zero To 60
Подписаться 58 тыс.
Просмотров 14 тыс.
50% 1

TURBO LAMIK 8HP70 NISSAN S15 SILVIA IS FINALLY DONE!
Its been 6 months in the making, but Brock finally got his S15 rolling under its own power again and in typical Brock fashion he has to torture test it immediately....... HELL YEAH BROTHER!
If you would like to help support what we do i have started a buymeacoffee page. Love you all! www.buymeacoff...
Become a member and get exclusive discounts at www.ZeroTo60.com plus other unique perks and benefits:
/ @zeroto60tube
In Australia? Visit the Zero To 60 Shop! www.zeroto60.com
Follow our socials for BTS stuff and more car content
On Instagram: / zeroto60tube
On Facebook: / zeroto60tube
Business Enquiries: zeroto60tube@gmail.com
---------------------------------------------------------
0-60 and 100-200 Dragy timer: amzn.to/2IKMQr0
---------------------------------------------------------
Our Must Have Tools:
Car Trim removal set: amzn.to/3oQhsHe
Under bonnet led light: amzn.to/3aaDJLt
Electric Rattle Gun: amzn.to/380Eh41
3/8" Drive torque wrench: amzn.to/34aGzwy
1/2" Drive torque wrench: amzn.to/37gGUPZ
---------------------------------------------------------
Our Must Have Car Care:
Hybrid ceramic: amzn.to/2KlkMuP
Tyre shine: amzn.to/2WcRzox
XL microfiber dry towels: amzn.to/2IShFdC
Wash mitt: amzn.to/3oQM7UA
---------------------------------------------------------
Our Camera Gear:
Ultimate camera/gear bag: amzn.to/2Kj1N46
Action/vlogging camera: amzn.to/37eWawM
Non-vibrate suction mount: amzn.to/3a9vmjy
Wireless mics for in-car audio: amzn.to/3a8C1dH
---------------------------------------------------------
When we're not working on cars, we're watching the Grand Tour!
amzn.to/3qXghY4

Опубликовано:

 

12 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 95   
@Hyngyynj
@Hyngyynj Год назад
Nice to see brock and dan taking kindly to the RU-vid side of stuff! Getting to experience this level of builds through video is awesome.
@harryperfors2224
@harryperfors2224 Год назад
That car is sick. All the right parts, looks epic. Well done guys.
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Thanks harry its brocks pride and joy thats for sure. Gotta get the new turbo setup dialed in with a little retune and time to get some miles up on the setup.
@harryperfors2224
@harryperfors2224 Год назад
@@ZeroTo60Tube yeah can see that. Very well put together. Can’t wait to see it running properly
@BippuLegends
@BippuLegends Год назад
These 8speed swaps are turning out sooo good man. Hope I can have my gs300 boosted by next year and then 8speed swap it some day 👌. Great content. Stay Patient, Stay Humble ✌️😎
@kencooper8636
@kencooper8636 Год назад
Great to see another successful 8HP conversion completed by you guys. It will be good to hear Brock's comments when he takes it for a run on the street for the first time. I can't wait to get an 8HP75 in my car but I guess I will have to wait until I get my car running again.
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Its all working as expected for brock so far.... although he has noticed a significant increase in rear tyre wear..... very strange.
@pugs1377
@pugs1377 Год назад
Happy to see more 8hp goodness. Maybe a 2j and 8hp will find it's way into my e39 some day when the m62 dies
@marktorres9818
@marktorres9818 20 дней назад
Do it now?!!!!! Tomorrow is never promised 😊
@theskidfactory
@theskidfactory Год назад
Cracking the gate on the transbrake 👌🏻👌🏻👌🏻Job well done Brock! such an epic car!
@ZeroTo60Tube
@ZeroTo60Tube Год назад
You need to come down for a test drive!
@546skaterboy
@546skaterboy Год назад
More wiring and initial tune setup for analog stuff would be nice to see and understand! Especially doing an initial tune setup to prepare it for adaptations
@friguy4444
@friguy4444 Год назад
Never driven an S15 but I've always wanted to. And with an 8 speed trans it must be a scalpel to drive! It's got to be one of the most beautiful cars when done this way! Along with the Mazda RX-7 . I also learned how a trans brake works this video! Always learn something every vid. Hey I see by Brock's Tatty on his arm that he's a big Donnie Iris fan! Awesome! I love that song "ALeah"!! Great driving tune for sure top 20. Okay I have no idea as to what his Tatty means lol. Sorry if I got it way off! Besides I think the song's actually AhLeah. Rock on Gentlemen!!
@ZeroTo60Tube
@ZeroTo60Tube Год назад
haha, unfortunately that is not the meaning of the tattoo, it is a much more sombering reaons.... moving on.
@adamwhite1977
@adamwhite1977 Год назад
Saw Brock ‘testing’ the S15 the other day outside your workshop. Man this thing is a beast 👌🏼
@auszman
@auszman Год назад
Those Rims look fantastic. The car looks awesome with a mix of Nissan, Toyota and BMW tech. It'll adapt itself I'm sure LOFLMAO...
@prussnblk6457
@prussnblk6457 3 месяца назад
My v160 is starting to need a rebuild in the Supra. Leaning toward this swap.
@180Lev
@180Lev Год назад
Awesome stuff. Congrats Touring looks great also
@HWR1JZ
@HWR1JZ Год назад
Damn, I’ve just not long completed a tr6060 swap on my jzx100 but this is already making me want to change.
@bavarianhero
@bavarianhero Год назад
Yes sir! Good ol’ Nissan, that’s why axles didn’t break lol
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Missed you lads!
@bavarianhero
@bavarianhero Год назад
@@ZeroTo60Tube I was going to ask last week what is going on but thank fully I waited. Expect the worst, hope for the best!
@glennarnold3970
@glennarnold3970 Год назад
well done guys the skys the limit brock looks like a kid in a candy store.Andrew i figured out my rear yoke problem i used the yoke from my 6hp19 e90 320i transmission and fitted it to my fg 6hp26 transmission same spline and captive nut so my flex joint will now bolt up to my tailshaft all i have to do is drill out the locator hole on the front of the tailshaft from 14mm to 16mm to suite the ford transmission no tail shaft cut n shut and the bmw rear crossmember lines up with the ford rear mount just needs 2 new holes for the mount a small modification to the front cross member and the fg turbo engine will fit in i use the bmw gear linkage and this means i can use factory shifter cheers from broken hill
@ZeroTo60Tube
@ZeroTo60Tube Год назад
man thats a wicked solution! glad you worked it out.
@AnthonyWayneLee
@AnthonyWayneLee Год назад
What an absolute unit.
@sircefiro
@sircefiro Год назад
Be good to see how much faster the 8hp is than a manual with a before and after 1/4 test or 2 similar cars against each other on some rolls
@emersonflores580
@emersonflores580 7 месяцев назад
Quick question have you guys seen the power limit to these 8hp70. Doing mk4 swap made 750HP and 585Tq left more power on the table.
@dustinbuechel2340
@dustinbuechel2340 Год назад
Do you have to use a trans cooler with the 8hp? How are the temps with one? I wont be using mine for drifting more roll racing than anything. Thanks!
@ZeroTo60Tube
@ZeroTo60Tube Год назад
They use coolers on the BMW OEM applications. However i think for anything like this they should have one. If you are doing rolls and spend a lot of time in the staging lanes. Look in to a cooler that can have airflow from a fan when the car isnt moving.
@tonka5134
@tonka5134 Год назад
Back to BMW content. Where are your cars
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Search spoolstreet for zeroto60, i can't talk about it.
@Team-B-Style
@Team-B-Style Год назад
Keyboard cams are life ❤️
@ZeroTo60Tube
@ZeroTo60Tube Год назад
That is a brillaint name for them haha
@matsjonemunthe200sx
@matsjonemunthe200sx 2 месяца назад
Very cool, did you have to go DBW or is it still Drive by cable, and works well that way?
@ZeroTo60Tube
@ZeroTo60Tube Месяц назад
This is still cable throttle and that works fine for pretty much all use types apart from circuit. For circuit you really need downshift blip to balance the car on turn in.
@Nico_335i_DCT
@Nico_335i_DCT Год назад
Wow guys. Insane car. Good luck drifting this missile! Regards Nico.
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Yeah she's got some power this thing, and like always it feels a lot faster with the 8hp vs manual.
@nickmaluso9240
@nickmaluso9240 Год назад
Question on the transbrake. I think I heard him say the car was in third but can it be engaged in any gear? Such as a third or fourth gear launch? Any noticable delay from releasing the trans brake button to when the trans releases? And lastly can you guys post a video of the transbrake bump feature as well? Currently I have a th400 and am trying to compare how these can leave at the strip. Keep up the good work 👍
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Hi Nick, by default you can start a transbrake in 2nd or 3rd, you can trick the lamik in to doing it in 4th..... we havent tried 5th yet... Video on the bump coming out in a few hours.
@PeterHatch-mx7zc
@PeterHatch-mx7zc Год назад
Credit to your skills
@johnbarr6873
@johnbarr6873 Год назад
Watching Florida My Sierra k24 8hp50 all running good
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Im waiting for some driving vids please!
@johnbarr6873
@johnbarr6873 Год назад
@@ZeroTo60Tube just needs a quick once over off you know who but behaves amazing Down on dyno power slightly as expected but pulls trice as hard This is the future for my old turd lol
@TheHigbyjo
@TheHigbyjo Год назад
Great work
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Thank you! Cheers!
@ZeroTo60Tube
@ZeroTo60Tube Год назад
also you should pop in sometime if you are ever on this side of town
@TheHigbyjo
@TheHigbyjo Год назад
@@ZeroTo60Tube definitely will do
@1993kawasaki
@1993kawasaki Год назад
CRIKEY....... #8SPEED
@tddworld4780
@tddworld4780 Год назад
What RPM did this stall too? :) Do we know if SDE in Melbourne has ever built a 4500RPM+ Converter for the 8HP70? I would rather use an Aussie mob instead of shipping one to U.S.
@ZeroTo60Tube
@ZeroTo60Tube Год назад
On this car i think around 3500rpm, however youc an spin these to 4000rpm pretty easily with a 3.0l petrol
@gorkemcosgun
@gorkemcosgun 11 месяцев назад
i still want ot make this converstion on mine
@Drunken_Hamster
@Drunken_Hamster Год назад
In the AWD tail-housings with Torsen center diffs, what's the Torsen ratio and how strong are they? Can you get stronger ones with different Torsen ratios? Could you adapt the tail housing with custom machined parts to send two jackshafts back up the front in order to convert the transmission into a Torsen-equipped transaxle? I know there are already AWD version with a front diff near the bell housing, but I'm considering doing it MY way in order to get the CV axles as far forward as possible, and also at whatever height I want to put them. The idea is to have the trans 5 inches off the ground (car frame rails 4 inches off) while the CVs are parallel to the ground on a 27-inch tall tire, and the trans as far back of the axle centerline as I can reasonably get. Do you think it's worth it or should I just stick with the typical single jackshaft to front bell housing diff setup? If so, what final drive ratios are available for that carrier, and are there high-bias Torsen diffs available that can handle high HP in a "heavy" car for it?
@Drunken_Hamster
@Drunken_Hamster Год назад
Dang, a hearted comment but no insight? I need answers, dammit! XD
@stephenwalls3979
@stephenwalls3979 Год назад
Hey guys have you done any with ford barras I’ve got a built Barra swapped 31 with a TR6060 this looks like a better thing than my manual 6 speed
@ZeroTo60Tube
@ZeroTo60Tube Год назад
We have the adapters on 8speed.au to adapt the barra to the 8hp70. Its been done a fair bit. The only thing on my mind is connecting to the engine ECU, with a haltech its all sweet. It will be a few months before we have the canbus connection sorted for the Ford OE ECU.
@stefanboyne1770
@stefanboyne1770 Год назад
Can you do a video on fitting the universal harness to a car?
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Yes i planned to do it to the F100 when we get back to it.
@stefanboyne1770
@stefanboyne1770 Год назад
@Zero To 60 great my 86 is ready to go just waiting on my turbolamic to come in got the box all in ect just need to wire up then go for mapping with new turbo ect
@duanerdyer1
@duanerdyer1 6 месяцев назад
Was that launch with the stock converter?
@ZeroTo60Tube
@ZeroTo60Tube 6 месяцев назад
Yes, we have sped it up a little too now. Some tweaks on the ecu side and changes to converter pressure on the transbrake helped. But yeah the diesel converter is doing the job well on this car.
@duanerdyer1
@duanerdyer1 6 месяцев назад
@ZeroTo60Tube Wow that's great...thanks for the info
@Mr.GS-147
@Mr.GS-147 Год назад
You boys started shipping to the United States yet? I need a kit bro..!
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Man we would llike to but the export paperwork on them is just too much. We need to get setup with gov as a proper exporter instead of doing one off exports, its too much paperwork for a few exports. So in short no.
@546skaterboy
@546skaterboy Год назад
Garage Whifbitz is able to ship to US! Where I purchased mine through, just sucks cause the support is all overseas
@ZeroTo60Tube
@ZeroTo60Tube Год назад
@@546skaterboy What has support been like through those guys?
@Mr.GS-147
@Mr.GS-147 Год назад
@@546skaterboy yeah they were the first I learned about when I was thinking about slapping a DCT behind a 2jz for my gs300. But their kits were super expensive then. But I’d frankly use a turbo lamik kit over any other transmission controller companies right now, just because of the success stores and the amount of support available. I’ve seen too many ppl complain about lack of support working with other companies, even to the point that guys are ditching their projects. Followed Dan since he did the initial swap on his flow master car and it just seems a lot of user friendly. His bench test in the video saids it all lol. Plus zero to 60 does a great job responding so I’m sure the support will always be there when needed
@Mr.GS-147
@Mr.GS-147 Год назад
@@ZeroTo60Tube I understand my friend, we need you to seal the deal with them tho. let get this thing on the way, I’m positive you will have lots of business from the US as well:).
@erlendthorsen7657
@erlendthorsen7657 Год назад
hi. do you know if i have to use speed sensor on my wheels to drive with 8hp gearbox? and what sensor do i need on the car? i have a track car. a bmw e92 gtr regards Erlend Norway
@ZeroTo60Tube
@ZeroTo60Tube Год назад
The turbolamik controller calculates wheel speed based on the output shaft speed.
@benperkins2929
@benperkins2929 Год назад
Nice
@p0intdk
@p0intdk 9 месяцев назад
Whats the oil cooler or size of it?
@ZeroTo60Tube
@ZeroTo60Tube 9 месяцев назад
About 500mm x 150mm
@johnrichards8587
@johnrichards8587 Год назад
I heard Dan and Simply Tuning aren't doing the BMW and N54 stuff anymore is that true?
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Correct. Can’t keep up with the trans swap work at the moment.
@TML34
@TML34 Год назад
@@ZeroTo60Tube Andrew, I'm going to send you videos of my N54 MANUAL just to remind you elitist 8 speed auto guys of the old glory days. 😂😂
@ZeroTo60Tube
@ZeroTo60Tube Год назад
@@TML34 bahahhaa
@dbnpoldermans4120
@dbnpoldermans4120 Год назад
Where can I get that shirt that Brock wears with the tree?
@ZeroTo60Tube
@ZeroTo60Tube Год назад
These were the first batch of 8speed..... uniforms haha. But we will have something similar available in the store soon.
@zeoh4371
@zeoh4371 Год назад
Is that an aluminum adapter plate or just shiny steel?
@zeoh4371
@zeoh4371 Год назад
Has to be aluminum if it was steel it would be 25lb
@ZeroTo60Tube
@ZeroTo60Tube Год назад
It is alloy.
@zeoh4371
@zeoh4371 Год назад
@Zero To 60 okay. I want to do this swap for a genesis coupe. The bk1 3.8 came with a zf auto 6hp21 which means the tunnel fits without mods. A flex plate adapter needs to be made just like in your vid.
@brianlofquist1246
@brianlofquist1246 Год назад
What kind of power will the 8hp70 hold? Real world not manufacture limits.
@ZeroTo60Tube
@ZeroTo60Tube Год назад
We really dont know. But type of use and how hard the engine is revving i think will come in to play. Id say a petrol engine running out to 8000rpm probabaly somewhere around 1000nm.
@charles-h9e
@charles-h9e 8 месяцев назад
The 70 means it's rated to 700-Nm for petrol engines. That's tested hard and bulletproof. Will "hold" more to some extent but sacrifices life
@rickcambo77
@rickcambo77 Год назад
What oil you pumping in
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Penrite BMV
@Stevendivittis
@Stevendivittis Год назад
So is it proven yet that these transmissions can hold up to the abuse of drifting and regular clutch kicks with higher levels of grip? I love seeing all these swaps and innovation!
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Man, i am surprised we have broken one yet. However if anyone is going to torture test its brock. These tyres lasted didnt make it to day 2 of testing...
@Stevendivittis
@Stevendivittis Год назад
@@ZeroTo60Tube I’ll be watching the developments closely! Appreciate the content!
@PtcjNoble
@PtcjNoble Год назад
First
@ZeroTo60Tube
@ZeroTo60Tube Год назад
Missed you lads!
@snapchat7293
@snapchat7293 5 месяцев назад
You got me with the click bait, I thought someone connected a 8HP70 to a SR20 S15. I was like who is crazy to mess up a manual Silvia..... But.... it's okay it's already messed up with the RB Just wondering a have afew friends that did the RB26 swap in their Silvia's (s13,s14 and 15) they all complained about loosing the Silvia feel. Did you notice it dosn't feel like a Silvia due to the weight at the front?
@ZeroTo60Tube
@ZeroTo60Tube 5 месяцев назад
To be honest, there is nothing silvia about this car. General opinion to make them feel good, you just have to change all the suspension arms, suspension geometry, change the engine, change the transmission, change the diff, change the shocks, change the brakes then you end up with a decent car.... haha. On a genuine note, you can have a lot of fun in one with 300hp, but they are lot more exciting to drive with 500hp. Regardless of weight over the front axle. But like any chassis its a matter of sorting the suspension to suit what you are doing with the car. The difference between an RB and SR is no different to driving on your own or having 2 people in the car. No one will ever say, i only drive my car on my own, because 2 people affect the balance too much..... This touches close to 700hp at the crank and is an absolute blast to be in. From circuit to drift to street, its dialled. But its not a chassis setup most are capable of putting together.
Далее
DYNO TESTING LAMIK 8HP & CLUTCH KICK FAIL!
15:49
Просмотров 14 тыс.
Эконом такси в твоем городе 😂
00:59
Китайка и Зеленый Слайм😂😆
00:20
Как подписать? 😂 #shorts
00:10
Просмотров 649 тыс.
I bought TWO S15 Silvias from Japan - THEY ARRIVED!
26:53
Quick & Easy Cheap S15 Build  - EP5
30:14
Просмотров 94 тыс.
The ULTIMATE Barra SWAP?
32:12
Просмотров 54 тыс.
A BIG TURBO S15 Silvia is Dangerous as Hell
17:39
Просмотров 57 тыс.
Old MINI (Honda Powered) vs New MINI (Turbo)
34:19
Просмотров 258 тыс.
I bought an S15 Silvia
14:07
Просмотров 363 тыс.