Turn signal problem diagnosis! (turn signals not working) 

sir, your step by step repair is very easy to understand even for a non-technical minded. we want more videos

I have a Toyota Camry and I have this exact issue, exactly as you illustrated here. I’m excited to solve this problem without having to go to mechanic, I love challenging myself. Thank you very much!

Thanks for getting to the point and not yakking on about the dogs or kids and just what I needed to know!

Thanks for your simple straightforward talk and video on instructions to replace a faulty indicator switch😊

When working on the electrical system, it's a good idea to disconnect the ground cable from the battery if possible. You may wish to use a memory back up device if you have a newer vehicle that will go wacko if you disconnect the ground battery cable. Other than that, this is a really good generalized video on the subject matter. I will install a new turn signal tomorrow on a 1988 Nissan Sentra and this helped me get my head straight on what I need to do. Thank you!

my 98 taco got the same problem, now through ur video i got it fixed. thank u so much.

Thank you for the video. I ordered the part for $45.00 and replaced following your video. Thank you.

Fast and right to the point.. Thank you for this 3 minute video!!!!!

Very helpful,,,, a bit further about the tilt wheel on some cars because the wiring to the connectors from factory is to short and gets pulled loose and sometime the connectors are just poorly designed and the wires just fall out after a few years.

Great video, short and sweet and to the point.

Wow! I hunted a long time to find this answer and you nailed it.

When making an instructional video for automotive repair/modification it's always a fantastic idea to clean the car first 😂😂😂

Thank you for making this video. Now I’m confident that I can do the repair myself!

Wow, I love it, my daughter had a similar issue in 1999 Toyota Camry. I can tell car a machine what to do.

I have a 2000 Solara Both of the turn signals just stopped working, could it be a fuse ??

My 4runner has the same issue except its iffy on the right side. This helped alot thanks!

Saved me a headache! Thanks!

DUDE!! THANK YOU SOO MUCH!! I HAVE THE SAME ISSUE, LEFT TURN EVEN!!

Believe it or not, my dog chewed up my blinker stick🤣🤣 so this was very helpful! Thanks bro

Thank you sir - that was a very instructive, easy to follow video. Excellent.

Check your battery terminals, mine was lose it was missing a screw and I wasn’t aware of it until my mechanic checked. He clipped the bracket and put it a new one. My blinker started working

Thank you sir , I learn a lot to you. Godbless your the Best 😀👍🏾

Great video sir short video but very helpful. You actually save my day. Thanks a lot.

Just a beautiful way to explain thanks for this saved me money

Your video was outstanding to change signal switch. Thanks for the video.

Thank you… resolved the issue

I have a similar, but weird, issue on my Toyota truck. The left signal flashes faster than normal, but only when I push on the brake pedal. I think I have a problem with the wiring for a 4-pin trailer connector. Additionally, the brake lights on the trailer do not work when connected to only this truck (works when connected to a friend's truck).

Well i noticed the front signals don't work on my 1992 toyota corolla so i went to replace the bulbs today still doing the same thing i looked still no action on the front end rear is good. I looked at the fuses they aren't bad is what made me look this up now. The left side clicks fast & the right side clicks normal. Usually fix my stuff so i can learn this simple stuff. So i'm assuming it's the turn signal switch or the relay...is there a way i can know which one it is before i get into buying random parts? Thanks for any help here & Thanks for sharing your time on here too man cool video.

thank you so much,this video save from getting a ticket

Great! I hunted a long time to find this answer on too many videos.

Thank you for the film. Can someone tell if the Turn Signals and Hazards use the same Flasher. The Turn Signals don't work at all, nut the Hazards work just fine. 2001 Saturn SL2. Update 1: I found it!! And what it was, I removed the headliner board for re[placing the upholstery on it, and disconnected the wire to the ceiling lens. The shop manual (I fortunately have for that car 2001 Saturn SL2) advised to attach those wires w/scotch tape, so I disconnected it fm/the plug by the rear window. The plug was sitting on a thin plate, which I assumed was there for keeping the plug in correct place. After I did some research I've learned that grounding could cause Turning Signals go off. The Manual showed 2 grounding wires on the rear close to that plug. There was a clip on the plug, metal one. I disconnected the grounding there, so even w/plug in the T S-ls didn't work of course. It might be helpful for someone else. Pls check the grounding as well if you have a problem w/T Signals and the fuse is fine. I was about to replace the Steering Column Switch, and actually ordered one already (so will have a spare now, not bad thing though). Update 2: Now everything is working w/that clip off or on, so it was not the ground connection, just a mounting clip. I'm completely lost and don't know what was the problem before. Maybe still the Steering Column Switch. The car was sitting for a long time, probably smth got corroded inside of that Switch and after several shifts back and force it is gone.

Cheers Mate. Very hellpful vid💯👊🍻

Thanks you it's really helpful

Great video need to replace mine

I have a similar issue but whenever I put the switch to do a left turn.. It blows the fuse. Doing a right turn is fine. changed turn signal bulbs and it work fine until I went back to turn the car on a few minutes and it blew the fuse again. hazards work fine. I put a new fuse in and this time I pulled the switch slightly down to use the left turn signal and it worked fine. just only when I pull it all the way down it blows. I'm not sure what it is that could be causing this.

Thanks for this video, straight to the point. 👍👍👍

Thank you Sr. You help me a lot with you knowledge.

Great really2 simple....like us as a non technichian also can understand it...great...i give it a like and subscribes to your channel👍

I have a 2004 Mitsubishi endeavor, my hazard always works, sometimes my blinker works and sometimes it won't. But when it doesn't work the left and right blinker go off. Any Idea?

That was Great. But how about the 2021 Tacoma?

Thank you for your time and video

So if the right dash blinker is not flashing at all could it still be the switch? I hear mine clicking, the outside lights work, right blinker does not blink with hazards. 2012 RAV4. Dash is a circuit board. Any suggestions:-)?

I installed LED bulbs in my tail lights and of course my blinkers sped which didn't bother me. But after a few weeks the left signal noise stopped intermittently clicking and just went to a solid buzzing noise. Replaced the relay and it's still doing it.

Super helpful thanks appreciate it, will try this.

My blinkers work but no sound? Is it the fuses? 2006 Camry LE

Thanks , saved me money.

Thank you very much very helpfull

I have the issue where my indicators work sometimes and sometimes not also my ac button light gets dim and when that light gets dim the indicators dont work

2005 TOYOTA RAV4 L THE HAZARD LIGHTS CAME ON BY THEMSELVES AN THEN CANT USE TURN SIGNALS SO I HAD TO PULL FUSE OUT TO STOP HAZARD LIGHTS FROM STAYING ON SO NOW I HAVE NO TURN SIGNALS WHAT DO I DO TO FIX IT? PLEASE HELP

Very helpful !!!

Thank you Sir

Have you seen this happen on 5th gen 4runners? I have a 2020 and my left turn signal works intermittently as well. It affects hazards as well. Fuse looked okay and bulb and connectors looked fine so Im suspecting its the entire switch itself which just seems so premature for a barely 5 yr old car...

Thanks buddy!!

My turning signals work you just can't see it on the dashboard so how do I fix that

Im going to be an expert mechanic by the end of this issue

Hi , thank you for your video, I have a question, my 2010 Avalon when I turn signal left or right, no signal light working, but when I push hazard switch, all the light working, what do you think what the problem? Thank you

Having any tips when the left turning signal flashes with the brakelight while braking?. Its the same when i put my car in reverse and the lights starts flicker as soon as i turn the signal left!

It works this is useful

My left blinker won't flip back automatically, so after every left turn I need to flip it back manually. Do you know what could cause this?

Mine work but it gets stuck when turning right and I have to take it down myself

Hello. I have a toyota yaris verso. I know u don't see that car in USA. My problem is when I put my directional to the right the headlights turn on, but not always. Also notice when move the switch just a little bit the headlights turns on (still in off position) what could it be? a fusible?

Perfect teaching. Thanks! Dean Jackson M.Ed

change my turn signal switch for my 2004 toyota 4runner and dash lights not working

What if When I do left turn signal It goes to right side ???

front rt turn signal not working, changed 2 different bulbs w/ no success. Any further suggestions?

i honestly doubt you’ll see this but if you do please reply. same thing happened to 2007 galant. my back right brake light was out (faulty wiring) i fixed it and originally only my left side blinkers stop. i just swapped a load of fuses.. now neither side works, and my inside lights and the buttons on my key

Was that part he showed the one he ordered?

Was your bulb burned out?

Pretty sure this what's happening in my Lexus IS250 2007. My right turn signal is intermittent. The left one is fine. And the hazards work, so it's not the bulb.

Going thru bulbs on both sides every 3-4 weeks on 2016 Tundra. Thoughts? Thx.

Thank you !!!!

I have the same problem on my Toyota tazz

Hey I might have missed it but my Tacoma doesn’t have any lighting up. No turn signals or hazards. Already checked the fuses and relay and signal switch. Still nothing.

So i changed the bulb, the fuses and the flasher unit on my 2000 chevy silverado , but my right rear turn signal still doesn't want to work. Could it be the bulb socket or turn signal switch??

Do you have a video about the flasher? Both mine work only occasionally. Thanks!

I have a Hyundai Tucson 2007 and the turn signal will not shut off after I make a left turn. It works fine after a right turn. Is there a way I can fix this without replacing the entire unit?

I have the same issue but on the right indicator

Hi great video, I have a 2008 Honda Civic Ex and when I turn on my blinkers the hazard lights also flash. I checked all of the fuses on the vehicle and also the wiring. I was told it’s the turn signal/hazard lights relay. Do you know where it’s located? If so can you please let me know. I opened up the turn signal stock and cleaned all the connections. Not sure if it’s a relay, check everything but can not find the issue thank you.

Soo I have the same problem I install a new switch and still having the same issue. Any ideas

I have an '06 Ranger. All the blinkers works fine except the passenger front. Inside the instrument panel you can hear it blinking fast but doesn't light, outside the bulb lights solid. None of the bulbs are burnt out. No matter how much I play with the switch it doesn't blink normal. I need help diagnosing this please

Awesome . I will attempt this repair soon!

My lights will go on and off while driving. Could this be the reason as well?

What if new bulb burns out as soon as you place it in? I've worn gloves and it goes out immediately

fog lights r not working on my pt cruiser 2002 even if i changed the bulbs,what fuse or relay responsible for that? thanks

I got no electricity in fuses and hazards are working, light bulbs are fine what can cause issue? BTW the high beam light is out too any ideas?

Ok thanks amigo

My problem is that, sometimes they work and some don’t, and i could get pull over anytime

Where can i buy a signal flasher for a kia sportage 95 and the turn signal switch?

Can the flashers work and blinkers not and the problem be the relay? Thanks.

What if it sounds like it's blinking - the left side - but it's not. It just makes the clicking sound. Not always though. But half of the time

Am having the same problem, mine both right and left are not working can I also change or what should I do

Mine comes on but blinks really fast is it the turn signal relay or the bulb?

This is exactly the problem i have on my car... do you have any idea how much it cost to by the new blinker?

Thanks 👍

Both my turn signals won’t turn off

Excellent !

*Yo, quick question for anyone, any idea what the issue would be for 1tail light not responding to the blinker switch. The bulbs work, but 1 side doesn't engage with the blinker. Have checked online, and can't find any main diagnosing. Fuse/Panel, does not seem to be the cause.*

Can this be used on any car (for ex: 2003 GMC Yukon denali) or only Toyota trucks?

Right or left turn on for a bit but go off on both sides... why help please.