I'm guessing there is an outlet under that wood panel. With any luck the leaking water will find the socket while he's standing close & potentially save many people from becoming retarded.
Я сделал подобное - работает! Подключил лампочку- работает! Потом утюг- работает! Потом всю квартиру, тоже работает! Потом многоэтажный дом! Сейчас экспортирую энергию в др.страны!
Super dear, I have tried the same when was in middle school then left it because I didn't get proper power generator and other stuff, now my son trying to make the same 👍👌🔥❤️
@@IndianSlingshot Sure, Im an engineer. This device wouldn't be able to pump the water back to the upper watermill as the energy required to do this is higher than the energy you get from the water falling into the lower watermill. Even if you could recover 100% energy that you get from the falling water (which is impossible because energy is always lost in some other ways like heat), you wouldn't be able to pump the water back to the upper watermill because sticking some rudimentary watermill will not work as a pump.There is no such thing as free energy, that is just made up nonsense.
The motor in the contraption is not the same motor he "converted" to a generator in the beginning. There is rust on the housing of the "converted" motor that isn't present in the other. The motors are AC motors and require starting capacitors, by pouring water into the bottles he "starts" the motors spinning, they continue to receive power from the transformer. The power strip has a small inverter and battery in it that is enough for the demonstration. The little circuit board does nothing and looks to be from an old FM radio. The motors spin at the same speed regardless of the load put on the system. However, you can see that the combined load of the motors, light, and charger is causing the inverter to sag and the charger keeps cycling on and off, causing the light bulb to dim periodically. At least that's my take on this fakery.
It's not totally fake! But the craft of his work differs from what he claims you should believe. We all know this too well. Thanks your efforts though!!
12:58 Try to lift up those piece of wood with transformer, and one more thing, this electric scheme can't work in reverse way (12V->220V), only 220V->12V
What a great innovation. When u take a closer look, the turbines are rotating in an opposite direction. And u dnt really need a charger from the very start. The only thing impressive abt this is u hide the battery very well dude 🌝
@@chrisu7022 I see wires going to multiple locations a battery could be placed with ease. The power bar, the transformer, or even in the adapter for the pump.
it is clear that there is a trick! Energy cannot be created, it can only be transformed! The only energy needed to bring the water back to the top is equivalent to the electric energy produced by the falling water! Therefore the pump absorbs all the energy produced. The budget is zero.
@@MLesp no shit you can make power with water. But there is no such thing as a true perpetual motion machine. No machine will be able to infinitely sustain itself let alone put out any excess power along side that
@XGeneralFloresX Yes, but those "laws" (the 1st and 2nd in this case ) are not absolute, meaning that they are created by humans with their experience and in some case to limit. A great example of this is when a crystal forms from liquid or when a quemical reaction is exothermic. These laws require assumptions and approximations and in many situations these assumptions do not hold. These laws are typically derived from classical mechanics which breaks down at a very small scale, atomic or subatomic level. On different accounts these laws needs to be modified depending on the project. It's important to recognize their limitations and approach with caution and critical thinking.
Robert Fludd published a description of this machine in 1618. The Fludd machine is widely credited as the first attempt to describe a device identical to this device. I mean Fludd's machine and this machine are IDENTICAL. The Fludd machine used water from the top tank to turn a water wheel, which rotated an Archimedes' screw to pump water to refill the top tank. The rotary motion of the water wheel also drove two grinding wheels. Since Fludd's 1618 device is _identical_ to this one, it begs the question "why isn't every light bulb in the world powered by a Fludd machine?" Of course the answer is obvious, in 404 years not one person has been able to get the machine depicted here to work as this machine appears to work, producing an endless amount of power from just filling the top tank ONCE.
Excellent response Tom. It really has me thinking after looking up Fludd's attempt. I'm thinking since FREE energy isn't possible, we should focus on generating energy CHEAP.
Logical experiment ✌️ Just to achieve this, you must provide 12vAc output current. Connect it directly to the 12v transformer so that the current is reversed to 220vAc, along with bringing a pump and a 12v transformer to circulate the water through the system used.
Nice work is there a blueprint to work with? Would be interested to build one ,have a lot ingenious people around me who aren't engineers per se but are gifted and could probably make this work
It's physically impossible to make a eternal energy generator since it would violate the laws of thermodynamics, you cant get more energy than what you start with. Most eternal energy contraptions are either battery powered or extremely efficient in conservation of energy
The people matter is that they are thinking this invention need additional energy to convert it to electricity , most of you are thinking batteries will charge but you don't even know the batteries are just tankers of electrons
The principle behind this setup is very well scientific. Indeed the law of energy conservation is not violated and there’s no need to have Orr hide any battery somewhere. It is not about free energy but rather high efficiency energy generation. The system which behaves like an oscillator set in motion was given a manual input and eventually will stop through frictions, energy dampening or once an imbalance of water occurs between the two gallons.
Do you really think that little bit of water dripping on the turbines is going to produce as much energy to charge a phone and light a 30w lamp with such light intensity? If following this logic.. perhaps a better idea would be to install a set turbines in men's urinals throughout the entire city... we will power the entire city with piss 🤣🤣🤣🤣
@@GALZKIE Power For production 12 volts and use Batery power deep cicle 200 amper for take the energy . And use the inversor to transformed to 110 to 220 Volts. Imagine Five Batery...
@@scott_forgot9875 Sure, scott bot! You need what looks like a 50hz 220v branch circuit connected to a triplex receptacle. Then you need a step-down transformer (18:1-ish) going into probably a bridge rectifier circuit with a built in filter circuit on the same PCB to feed one 12v motor. For the other 12vdc motor it looks like you just need to snip the end off of a cellphone charger (or some other device charger) and direct connect it to your other motor. From there it looks like you need a bunch of plastic garbage and a poorly welded metal frame for presentation. Don't forget the hot-glue gun and incandescent light-bulb to complete the display!
هذا يتناقض مع مبادى الثرموديناميك ولايمكن خلق طاقة من العدم الطاقة للحركية للماء لايمكنها تشغيل المحركين في الأعلى والاسفل ولابد من توقف الحركة بعد فترة
What you see is a contraption that's draining a battery or drawing power from a hidden outlet but with a lot more steps, and the hidden power source provides enough extra energy to compensate for all the loss in those complicated steps AND light a lamp or charge a phone or whatever. Without a hidden power source this contraption would run down within seconds. The small energy input used to start the system (raising water to pour, turning a crank, whatever) will be quickly wasted in heat (vibrations like noise, friction in bearings, resistance in any and all wires, eddy currents in magnetic materials, friction of water against surfaces, etc.) Thermodynamics is always in play - you can't get out more than you put in. Even if you removed or exactly compensated for all that wasted energy this thing would move but could do no work. And if you overcompensated for that, say by adding extra energy? You have a fancy moving sculpture connected to a power supply that has enough excess power to drive a light bulb or power a phone. You don't ever get energy for "free" (as in, no effort expended somewhere in the system) - something is doing work, turning a source of potential energy into kinetic energy you can use, and there are always some losses to consider. Even solar energy has a cost, however small - think of it as a giant battery - in billions of years even the sun will run down.
@@darrylbrookes2780 I would suggest looking that question up. Probably somewhere like Stackoverflow. The short answer is that when you use a permanent magnet, it's not gaining or losing energy in any significant way... The force necessary to attract an object to the magnet is equal to the force necessary to remove the object from the magnet. I guess you could also look at it like this: If I lift a box with a stiff cable that cable itself is not a store of energy and is not doing work independently
Ok you don't get energy for free.... So.... How is that magnet staying attached to my fridge defying gravity, it has stored energy.... How much is the question. If electro magmatism isn't energy then what is lol Are you saying the energy is in the steel and the magnet is using that .... Come on lad
@@MartyMacgyver is there a magnetic largrange point that could be manipulated tho as to create a hand off and no magnetic resistance to motion , there may be kinetic losses at some point but ya could use extreme low temperature to counter that if ya using on large enough scales
@@darrylbrookes2780 Imagine a smooth curved channel (a bowl, at least in cross section). At one end you have a ball. You release the ball and convert its potential energy into kinetic energy as it rolls down, and then from kinetic to potential energy as it rises up the other side. Does the ball roll back and forth forever? Nope! It goes a little less far each pass, til it finally stops. Frictional and vibrational losses (much the same as resistive and vibrational losses in the closed loop this contraption claims to be) quickly grind things to a halt. Once you do work of any kind, **even to generate heat**, energy is lost from the system. The second law of thermodynamics doesn't care if you disagree with it - it's still the law.
the neodymium magnets add extra energy not sure how much or how long they can last it would depend on the amount of power drained vs the amount needed to pump the water i guess, you could find the amount that compensates for thermodynamics and ya golden, but i think if you plug in too many devices it will drain the system. or i could be wrong
@@bob_kazamakis yeah actually bullshit guessing is how i do all my best work lol. my bullshit guessing just seems to think thermo dynamics is wrong or more likey over simplistic. kinda like newtons laws that are more like guide lines then actual laws. i feel like black holes kinda prove that perpetual motion exists as light can not breach the event horizon but.... if thats possible with a multi dimensional thing like space-time , dont see why electromagnitisum cant have the same thing on a smaller scale .
@@darrylbrookes2780 Just keep your bullshit guessing to yourself. Lmao everything u just said is horrendously wrong. Atleast understand the physics or concepts of things your talking about.
@@CrunchsterXX2 why should i keep it to my self? why dont you explain the physics and concepts ? all ive done so far is ask questions why dont you just chill out ? 3 questions for you to answer there but here is a statement.... i dont think you understand the physics of electromagnetism. because as far as i know now one does lol.
What's crazy is if you actually understand how electricity works. You'll understand why a battery is required and see the ingenuity and intellect this man holds in himself. This was pretty fascinating to watch in all honesty, much respect to the creator of the video
The "battery" is the initial potential energy from the pouring of water. This think will keep fading and fading without mew water because the pump still has to send it back up to the top, taking more energy than the twin generators put in.
@@AWESOME2715 It‘s working for far too long without any sign of slowing down to run on the initial potential energy. Nothing used here is near 100% efficiency which you would need to keep it running for more than a few seconds. It‘s all running far too smoothly for this kind of crude setup. „Generators“ working at constant speed from the first drop of water in there. The fact that both generators are just wired in parallel without any diodes or rectifiers alone shows that this is trickery.
@@bushisfuckinretarded Ask yourself one very simple question: Why was NOTHING plugged in that would show power being generated BEFORE the water was added to "start" generating power? And also ask: What does the plug with wires running up the water return tube do? Why was it plugged in before anything else? What does hide in that first plug? If anything, I don't know...
Big question, what happens at those massive hydro dams? Ah? Water. Turbine. Rotor. Residual magnetism to induce just a flicker of current flow in the stator and voila - an entire country side is lit up
sumber tenaga awal itu dari putaran dinamo atas, dengan daya dorong air kebawah bagian baling" dinamo bagian bawah, sehingga mengakibatkan dinamo inti berputar yg menghasilkan gerakan tenaga, dan di ubah menjadi daya listrik dari modul trafo yg sdh di buat, sedangkan untuk menyalurkan air kembali keatas, dengan cara dinamo tambahan pengihasap air yg berwarna hitam yg ada dibagian botol bawah, sehingga sirkulasi air tetap stabil serta menambah daya dorong untuk baling" kebagian atas di akibatkan air deras mengalir akibat bantuan dinamo penghisap air, Inti sumber listrik yg di hasil berada di bagian atas untuk supaya dapat membuat dinamo bekerja dengan baik
Mostre no video a parte técnica. O que liga onde , seu vídeo é confuso , insatisfatorio no funcionamento técnico. Demonstre realmente q realmente funciona . Até agora foi só Armação.
it will last as long as the power doesn't drop to stop the water pump ☺️ so it's not recommend to power a high current electronics like a fridge or something like that . just use it for some low current electronics ❤
From my experience with small pumps, that pump could not pump enough volume of water fast enough up hill to keep up the flow we are seeing. What is the upper motor supposed to be doing? That part is not explained, or I missed it. If this worked, every hydroelectric Dam would be using this system.
The suction pump has to be powered from the rectifier unit next to the transformer to pump water out of the bottom can to the top so it free falls via the turbine
I am an electrical engineer. This is made for those who do not know how this "creating energy" is going. For YOUR TO PUT INTO FUNCTION a machine from which ELECTRICAL ENERGY COMES OUT, you need to SUPPLY THAT ENERGY + THE MECHANICAL LOSSES OF ENERGY:- FRICTION, BEATING, ETC. The idea is good, the feasibility =0
Great work Pakistani scientists will work on this project to remove the loadshedding crises through out the country aw the poor people will able to survive inflation by not paying monthly electricity bills. پاکستانیوں آجاؤ مفت بجلی کا فارمولہ مل گیا
Дела возбуждения внешней обмотки электро магнита двигателя от стиралки нужен ток, чтобы этот мотор работал как генератор, парни смекалистые но ловкость рук и не какого мошенничества, всем добра 😊,
10:05 here fake starts. rotor rotates even before water fully hits it. Also he doesn't consider the inner resistence of the rotor: his water wheel radius is even lower than his motor's radius.
SCAM!!! use 4x zoom and 0.25 play speed and see yourself... 9:04 first 2 hiden wires from socket to coil and from the edge to coil,hiding with hand the 9:21 thin wires on the back right edge and middle of plank going in the outlet, 9:18 naked wire on the right edge of the plank next to/between outlet and coil going over the coil, 9:18 out of focus hair thin wire over the coil to pcb and on the back side of pcb going in the right yellow wire hole, 9:20 clear image of the thin wire, 9:49 2 hair thin whires going out of the white spot to the edge and to pcb 11:48 hiden wires are moved (masked) to the edges of the plank and the black base of the outlet for the closeup shot and hotglued.batterys are in the socket or under the coil....what a waste of time and parts just for the numbers,you will be rich .....in your next scam video please hide your foot nails or wear socks..
Power For production 12 volts and use Batery power deep cicle 200 amper for take the energy . And use the inversor to transformed to 110 to 220 Volts. Imagine Five Batery...
500W Inverter DC 12V-24V to AC 180V-220V-380V Booster Board Module 18 + and 18 - should have a diod to stop backwards wiring this dc in put can go upto 24 volt maximum input is the dc input in from the motors and ac is 220 live and 0 is natural
The top host is located to the left of the plastic bottle but amazingly the fan spins right 😅. Secondly, the pressure release from the host doesn't have enough tug to push the fan at that speed. The plastic below is even worse.
Brilliant! I am really impressed with this ingenious device which is the closest thing I have ever seen in my 63 year's to a genuine perpetual motion generator machine. Absolutely outstanding 👌 I applaud your ingenuity 👏👏👏
But this one is supposed to make power from the falling water to a generator and keeps on running because the water falls back onto the lower generator (that was made from a motor by adding magnets) Nope.... that would be a perpetual motion machine. Won't work. Gotta be a fake. But if your curious, give it a try. 🤗😊🤔🥴😥😊
Нет, тут дело не в этом, он просто использовал источник кинематики. Но проблема не в этом, когда он подключил лампу, этот ген. должен был отреагировать падением оборотов, но этого очевидно нет. Поэтому, увиденное - под сомнение!
Watterwhells with spoons (or scoops) - in shortuct - Peltons turbine - could be more effective on this setting, but there is no arguing with success. Congrats.
Та в это видосе прекрасно все, начиная с того, что верхний генератор вращается против потока воды, что снимаемая мощность выше затркченой (законы термодинамики вышли из чата) и заканчивая тем, что при подключении нагрузки, обороты генератора ваще никак не изменились)) вобщем как всегда))
@@Moe-xk3zw Правда чуствуется в твоих словах, но верхний генератор крутится нормально, да и где в этой конструкции можно засунуть такой источник питания чтоб питать то что не смогли бы запитать генераторы.
@@user-ft1iw9ob2n что именно тесла? Если аккумы, то тесла не лучший вариант. Та же sony vtc6 на порядок лучше и по емкости и по внутреннему сопротивлению, по цене, кажется тоже, не помню сколько сейчас теслы стоят.
This is not impossible there is no hidden battery or power supply the problem is that a machine like this can only work 2 minutes at most then most of it's energy is dispersed and wasted then it stops and the top tank needs to be filled manually again to restart it. The video is edited to hide the refilling part and THAT is an insult to anyone who has ever touched a wire in his life
Imagine aumentar para 5 níveis de motores gerando energia. Onde vc precisaria somente de um único motor de sucção para 5 geradores., já que a gravidade ajudaria no processo de descida da água.
If someone is surprised that this doesn't work: This would be a perpetual motion machine, where the water that drops down over the pallet wheel to move the generator can also go back up. This is impossible. In this particular scenario, a pump is being used to push the water back to the top container, the problem is that the pump is powered by the generator. So the gravitational potential energy of the water would be converted (inefficiently) to mechanical energy (the pallet wheel spinning) which would then be converted into electric energy to power the pump. Every time energy is converted, there are some losses, due to friction or simply due to inefficiencies in the desing. So going from potential energy to electrical energy has losses, therefore there will not be enough energy in the pump to push the water up. As other have pointed out, there is a battery powering the pump too, so it isn't only the generator, which does not have enough power. This video is a scam and I'm sorry for everyone who might try this and then be disappointed that it didn't work
I think the idea could work but not using water. We're missing the element(s) that would have the properties to make it possible. I've always figured "free energy" is simpler than we think; but, we're missing elements and compounds that would make it possible. Biggest problem is catching and storing the energy.
E a energia que se gasta para subir a água até o topo? De onde ele tira? E a energia gasta com as perdas no campo magnético do motor,nos condutores no eixo do motor e gerador? E as perdas com a resistência existente no estator do motor e gerador? De onde ele tira essa energia? Como ele estabiliza a frequência de 60 hertz que o carregador de celular precisa para funcionar? Como ele mantém a tensão de 110v estável? Esse vídeo me deixou cheio de perguntas, pois parece que as leis da física não se aplica aos projetos desse homem 🤔 Ele deveria aproveitar essa Imunidade para acabar com os problemas mundiais😒
Então! Sem contar a frenagem eletromagnética que a bobina do estator causa nos neodímios. Ele realmente é imune as leis da física! Tragam um engenheiro para esse oscar!
Chào bạn theo bạn thấy trên mô hình cái cục adapter có viên pin bên trong nó làm bơm hoạt động bơm nước cho 2 cái động cơ quay vô ích còn pin thì làm đèn sáng và nạp vào điện thoại như sạc dự phòng..
The washing machine motor works on 220v Ac ,if then it produce the same voltage if it is operated as a generator. So, my question is why is the need of a dc ->ac converter board and a step up transformer. Please explain me....
Kinetic energy of water has nothing to do here ,he's just pouring water to make it look like real.The motor has the battery installed already and that generates energy.
ı don t know what is the second motor , but i guess it should be the one which produce more energy to make it bigger than consuming , in other saying , helping machine or an alternating one .. if you can produce as much as you consume then you will be able to make an eternal generator I think :)
Let's start from the assumption that energy is not created but transformed. Starting from this premise, in an ideal and isolated system it is possible to transform magnetic energy into kinetic energy and create a circuit that feeds itself, because it would be a continuous transformation of the energy itself from one form to another. The problem is that in reality there are dispersions, to put it simply, a part of the energy involved in the system inevitably produces heat (not counting friction and wear of the materials), therefore in the long term the energy of the system goes decreasing, i.e. the total energy does not remain constant. When all the energy is dissipated into heat and dispersed the system will stop Having said that, if I want to use part of the energy from the "perpetual generator" to run another system, obviously the loss will be faster because the self-produced energy is not fed back into the system Think about one thing: the stars self-produce their energy and constantly dissipate it in heat, in fact they are not eternal but they wear out and after billions of years well ...... they too turn off
Ingenious!!! Don't think the Swedish insurancecompanys agree to this, take it easy man!! Put the electrical on top with cord with loop, from low too high so water drips off. Cheers
If this actually worked, you would scale it up and power your home, your neighborhood, and your country with it, you would produce weapons powered by it and take over the world. The energy of the water falling from the top tank is not sufficient to power the pump.
ESSAS PORQUE VC QUE FEZ ISSO NAO VENDE , IA FICAR MILIONÁRIO. SABE PORQUE NAO VENDE, PORQUE SE APROVEITA DO DESESPERO ALHEIO PARA FAZER UMA SACANAGEM DESSA,, VC DEVERIA SER PRESO ....
This kind of people is blessing for humanity in term of profitable, And those who desire for research in advance thinking' thank you man for sharing your great knowledge god bless you more idea.
Low volt from low rpm generators is boosted up by jewel thief circuit and pulsed high voltage is stepped up by transformer to deliver high voltage power to receptical for water pump, and accessories. water pump maintains generator output circuits. Small capicitor smooths high voltage AC output.
Desde quando a energia fornecida por um gerador é suficiente para alimentar ele mesmo? gerador perfeito sem perda de energia não existe. Isso é falso e muita gente sabe disso, mas a maioria acredita.
Yeah I think it's fake coz the water drop from the left side so the propeller turn where the water drops.but you can see the propeller turn on from the right side.i think it's fake