Turn the WORST WOOD into something beautiful?

Подписаться 153 тыс.

Просмотров 95 тыс.

50% 1

Get an exclusive ‪@Surfshark‬ deal! Enter promo code DAINERMADE for an extra 3 months free at surfshark.deals/dainermade
Can I turn this old palletwood into something cool?
G'day,
I have turned on memberships as I became elligable, memeberships really to help support me to keep the channel growing. Appreciate any supprt and am toattly greatful. thank you.
Join this channel to get access to perks:
/ @dainermade
MEMBERSHIPS 🙏
Past and Present
Come and go as you please
Your name will always be here!
Thank you Kindly for supporting my channel
CHECK SQUARE CUBED
Dale Cordwell - Delbasid Timbers
Barber’s Paddock Woodworks
Tim Garrett
CHECK SQUARE SQUARED
Brian Tyler - OUTDOORS WITH BT
Francisco Martinez
Gary - Possumhead Carpentry
Glenn - Presto’s Woodwork
Angus Lyons
Reubz Pene
Staffordshire Craftsman
CHECK SQUARE
James Finger- FIXIT FINGERS
Mario Capellano- THE WOODFATHER
Karl Pope - KARL POPE WOODCRAFT
Paul Williams
Alberto Bressen
Gus Elliot
Geoffrey Nicholson
Mahli Peneamena
Dryer Thackson
Teresa Cole
Mahdi Peneamena
Rich Staniland
Sam Potashnick
Lucas Wincote
Russell Waddington
Peter Middo
Angus Lyons
Clayton Miller
Sin Bin Creations
Martin Stanik
Tim Bankes
Vic Lampert
Brandon Harjer
MrNetable
Kelvin Jardin
Tool Price Check
Das-sprechend-Pferd MR.Ed*
Lee Bennett
Lol Purl
John Storrs
GorillaQuipster
mrmjspencer
SAFESTYLE EYEWEAR (Affiliate) DAINER10 at checkout 10% off
safestyle.com.au/?ref=
Power Tools
Bosch Bench Drill press - amzn.to/3SCJs0J
DEWALT 1800W 330MM THICKNESSER DW735XE - USA amzn.to/2XfAFqD
Dewalt Router Trimmer - Australia amzn.to/3gxwtud USA amzn.to/2XdFUqY
Dewalt Orbital sander - USA amzn.to/2ZRYEhA
Dewalt Drill driver and Impact driver -USA amzn.to/2TMWmML
Bosch Sliding Glide Miter Saw - USA amzn.to/2XijDsa
Other Tools and useful stuff
Pneumatic Denailer - Australia amzn.to/36LOQGs USA amzn.to/3cirEBm
(the one I need)
Metal Detector - Australia amzn.to/395DzSc USA amzn.to/3gAV0hI
Clamps Irwin Quick Grip - Australia amzn.to/2FIOCDV USA amzn.to/2TPxi7W
Pipe Clamps Australia amzn.to/35R6oPT USA amzn.to/2MegEdW
Wood Work Pencils Irwin - Australia amzn.to/2tdEOz5 USA amzn.to/36J9h7v
10 inch dewalt blade - Australia amzn.to/38WcYXR
Irwin clamps - Australia amzn.to/394YzJb
Stanley 12 inch Square - Australia amzn.to/2Aj1zoK USA amzn.to/2XHaDM5
Toggle Clamps -Australia - amzn.to/2Xe4CpR USA - amzn.to/3gF4nNq (same size, different brand)
Bow Products Push Pro - (push stick) Australia amzn.to/2ZUObSi USA amzn.to/3duCJAE
Bow Products Guide Pro - Feather board - Australia - amzn.to/3dhdphy
Products I use:-
Titebond III Ultimate Wood Glue - 3.785ltr - Australia amzn.to/37Spnuv USA amzn.to/36Se6M4

Хобби

Опубликовано:

14 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 183

@24jstretch 11 месяцев назад

This is what I enjoy about watching you. I feel like I make so many mistakes, but videos like this make me want to keep going.

@TheWardagh 11 месяцев назад

Exactly, I’ve even burned a few unrecoverable pieces so I don’t have to look at them 😂

@TheWardagh 11 месяцев назад

Exactly, I’ve even burned a few unrecoverable pieces so I don’t have to look at them 😂

@Northernbrent 8 месяцев назад

Well said!

@dryerthackston7088 11 месяцев назад

I enjoyed the video but a sorry to hear about bench-time. I hope you recovery quickly. I can't wait to see this finished project.

@calculuspi2070 11 месяцев назад

Just started pulling pallets apart today. Hopefully I'll move on to reclaimed hard woods later. It's amazing how much you can save from something that doesn't look like it has much value. 😊

@PatrickCordaneReeves 11 месяцев назад

Salvaging is a skill that is going to continue rising in value as the years progress. Good on ya for starting now.

@TheHkluivert 11 месяцев назад

The optical illusion is great!

@AlexanderElse 11 месяцев назад

Oh mate, the problems you pointed out... I feel your pain. I've had a few projects like that where you've invested a lot of effort and something is so badly wrong you need to weigh up whether to fix it or scrap it. I urge you to make the call one way or the other and move forward. Best of luck. I always enjoy your efforts and it's inspiring to see what you come up with. I even did a 1 pallet project myself last week!

@annie-centrepiecefurniture 11 месяцев назад

Very clever with all the patterns, I wouldn’t have the patience, amazing work 😀

@annie-centrepiecefurniture 11 месяцев назад

@@dainermade hmmm maybe one day !

@oldduffer 11 месяцев назад

Great to see your honest and all your mistakes. We all make them! Go steady and Hope you have a fast recovery and you are back in your shop soon. 👍

@jibcot8541 11 месяцев назад

Beautiful, almost unbelievable its made of old pallets.

@woodenthumbyt 11 месяцев назад

The patterned turned out awesome. I’m sure you can macgyver it into something worthwhile when you’re back at it. Get lots of sourdough and avo’s

@randelcross 11 месяцев назад

Success or, not so much... you are always entertaining! And if it was easy... everyone would do it!! Thank you Dainer!

@MJKCreations 11 месяцев назад

That looks gorgeous. And I don't think I'd care about the square issues if I were the one to purchase it!

@FJGavio 11 месяцев назад

I love the idea of using it as your outfeed table!!!

@lachlanbell8390 11 месяцев назад

Man, this is the first time I've encountered your channel, and not even a minute in I had to pause because that line at 0:26 "I just want to make cool shhhhhsstuff, be excellent to each other, and then fade off into obscurity" sent me into a moment of profound existential contemplation of mortality and the fleetingness of our individual existence in the vast timeline of humanity. I haven't gotten to anything about woodwork yet but judging from that, and the piles of timber in your intro that look exactly like the piles of salvaged timber lying around my place, I think I'm gonna like you a lot.

@burnsbits5829 11 месяцев назад

More inspiration for someone like me who has yet to dip my toes into making but keeps thinking of doing it 😅. Ive got a handful of tools and will take the plunge soon.

@heybails854 11 месяцев назад

Mark, Dainsey, Full Business Human, Thanks for all your videos so far. I have been following to hone my woodworking skills since I started 18 months ago. Hope all goes well for you and your family with your time away from the camera - hoping we call all breathe easier when you come back online. Martin.

@davinkaiser8888 11 месяцев назад

Great design! Love it. These are the same kind of mistakes I make. Thanks for showing us the real stuff. Hope all's well. Don't stay away too long.

@diyforknuckleheads 11 месяцев назад

These blue pallets that were in the bin....wink wink...nudge nudge 😂 I feel your pain when something you are so keen to get right doesn't quite go to plan.....just breath mate.....breath. Great vid as always 👍👍😁🇦🇺

@diyforknuckleheads 11 месяцев назад

@@dainermade 👍👍

@KevinDrewlo 11 месяцев назад

Love the pattern this design makes. It looks amazing!

@BillHartCooks. 11 месяцев назад

"I like recycling, it makes me feel good... on the inside....." Me Too. Carry on!

@singhivan 11 месяцев назад

Hi mate, wow, I reckon it turned out amazing. Love the pattern, especially when you applied the finish 👌. I reckon it was well worth it. You've done an amazing job as usual. Kudos to your son for helping. Waterfall mitre corner may have won this time......but you are realing in close behind and will surely catch up soon 😂. Love the inspiration by the guy who wants to join wood to buy sour dough bread and the rest of the things his mentioned. Amazing. Cheers from South Africa

@gothridercreations 11 месяцев назад

Hope everything's alright Dainsey, look forward to the conclusion 😊

@mistakke5860 11 месяцев назад

I found your channel recently and I gotta say that I really like your work. I'm a woodworker myself although in a little bit of a different spectrum but I think I might give working with pallets a shot. My father has a lot of unused ones from his work so I might be able to make something out of them. I'll be sure to come back and look for tips and tricks. Keep up the good work, brother

@AntiSerpent 5 месяцев назад

I have some screenshots of our wood we had for so long and idk if we still have that wood since the day our yard was finally cleaned up.

@kelvinjardin5720 11 месяцев назад

Another awesome vid! Those zigzags look beautiful! 🤩 I bought a pallet buster the other day, can't wait to get making my own Dainer inspired pallet bricks 😁

@jimrosson6702 11 месяцев назад

As always great video so entertaining as usual. Can’t wait to see the finished product

@peterschoemaker9 11 месяцев назад

Hey, you can get all nails out (even headless) drill 2 holes right next to the nail on the long side as deep as the nail. Then insert a nailpunch and move it side to side to make the nail loose. When its loose you can take it out with nose pliers.

@peterschoemaker9 11 месяцев назад

@@dainermade haha true. Sometimes you get caught up in the moment.

@kevinsimpson7114 11 месяцев назад

Great pattern and finish. You inspire us all👍🏻

@silverbackakasherby2033 11 месяцев назад

don't be hard on yourself mate the time alone it took to prepare the timber and put together shows fanatical level of dedication

@easternbrown 11 месяцев назад

I enjoy these videos for what you can learn about upcycling pallets and what you can learn about fair dinkum aussie slang

@777woodworks 11 месяцев назад

Love the look of the pallet wood - you find some great wood in your pallets - I've looked in my area and all just pine/soft white stuff, nothing interesting...but in time, I hope to build something out of them....

@linkwokeup 10 месяцев назад

Really enjoyed this ty man, nothing like the feeling of turning trash to treasure. The top is absolutely beautiful, I think the alternating good/bad side created a shadow-like effect that makes it look 3 dimensional, unreal.

@WildWoodsAustralia 11 месяцев назад

Great looking piece! Really cool that you show everyone ya stuff ups too! Not every project goes to plan and that’s not something to be ashamed of. Good on ya mate!

@LoisHubbard 7 месяцев назад

Hi Dainer. I have come to your channel from Jesper's. I've got to be honest, the design and finish of that wood speaks for itself - it's just breathtakingly beautiful and I've very grateful that you took all the time you did to make it and share it. However I came from Jesper because you are a part of a really wholesome and inspiring community and I feel like we need more of that. Love the priority you make out of recycling what you've got. Looking forward to seeing how you'll recycle this "mistake" to help it find it's final form. All the best!

@dainermade 7 месяцев назад

Thanks mate! The community is unreal, find the right people to surround yourself with and away you go. Hopefully I’ll do something with this once the new saw arrives 😉

@zacbrown935 11 месяцев назад

Mate, this is absolutely fantastic! Absolutely worth it, the chevron pattern is the bees knees! Love seeing Check Square Jr. in the shop with you. Looking forward to seeing what is next for this particular piece. Take care and be well Mark!! Or is it Dainsey?? Either way it's all good!!!

@myhoneyshandmade1077 11 месяцев назад

I love the pattern too. I need to make some.

@lesterkakepetum2586 11 месяцев назад

I finally found some hard wood from pallets where I’m from , can’t even get the nails off the stringers , pallets gets sent back where they used from cause we get everything shipped by plane , I mostly breaking g them up juss gathering wood to use , I need tools to make things easier

@FixitFingers 11 месяцев назад

Skip the coffee table and go straight to the outfeed. On brand and awesome :D ...but you'll need the new table saw first :P

@seancampbell2456 11 месяцев назад

There's a bit of an optical illusion in that design that is awesome

@seancampbell2456 11 месяцев назад

Dude you are awesome! Top tier content as well man keep it up! A lot of good information and inspiring me to go full business human

@splinters_66 11 месяцев назад

Pattern looks ripper mate, a little bit of finessing, and check square will be apples. Great to see you using the old wood for good instead of evil 😁

@CNKXU1 11 месяцев назад

Beautiful pattern, doing my eyes in a bit. I was in FNQ recently so I sort of understand how hard it must be in your shed at times. Keep it up. BTW I have followed your recycling tips with nail removal and detection but my detector does not pick up embedded stones. Tiny bits of gravel are not kind to my thicknesser.

@CNKXU1 11 месяцев назад

@@dainermade eyes are not what they used to be!

@KrisG619 11 месяцев назад

What a beauty. Love surfshark, we've been using it for 3.5 years now. Love the cameo from the Tassie bushman.

@RobinLewisMakes 11 месяцев назад

That's fekking beautiful mate! I love that pattern

@jonathanljohnson 11 месяцев назад

One word of caution about salvaging wood. I once took a pallet home from work; it had come carrying a machine from Asia. It was a beautiful deep red wood with great grain figure, so I couldn't wait the get a piece of it onto my lathe. The chips came off quite fine, creating a lot of fine dust. I wasn't wearing a dust mask and my nose soon started running; I expecting it would just be clear fluid, like comes during a allergic response, but it was blood flowing from my nose, quite heavily! It seems that there are some species that can really get you in trouble!

@jonathanljohnson 11 месяцев назад

@@dainermade It took me a minute to clear my sinuses, but as soon as the dust was gone, it was over, no lingering effects. I read later there are several species that can induce bleeding like this, but it was a real surprise to find it out first hand and without warning!

@woodworkingandepoxy643 8 месяцев назад

The moral of this story should just be always wear a dust mask. All fine wood dust is a carcinogen and not something to breath in. Masks are cheap. Cancer is not

@jasonlewis3620 11 месяцев назад

That too if it becomes your new outfeed table it will be sweet! Look forward to what is to become its next life!

@jeannawalsh51 11 месяцев назад

Gosh Dainsey, I hope your benching doesn’t prove to be too serious. Good luck and hope for a speedy recovery.❤

@coolabahwoodworking 11 месяцев назад

Love it mate! i had a tought week with square too 😀

@coolabahwoodworking 11 месяцев назад

@@dainermade Mine was so off I corsseye balled it :D

@runwiththerunners8152 9 месяцев назад

This is great. Just found you channel so working through your videos. You are inspiring me to produce something. One thing that has surprised me is how much is done by glue and I wonder if it will hold, then the -polishing up and sealing etc. Much to earn I am sure the answers are in videos of yours yet to be seen!

@dainermade 9 месяцев назад

Glue is a magical thing. A good glue bond is stronger than than the timber itself. Quality glue though. Enjoy the ride mate... and thanks for watching a few

@guinnesslover2970 11 месяцев назад

Mate youve inspired me with your "just get started" thats why im doing my recycled rockers and ill send more pics soon as work work keeps getting in the way :( cheers Darren

@Toyotajunkie 11 месяцев назад

Dang mate! So close! It looks real nice though. Maybe try to trim it up to square? There is always next time!!!

@ReclaimDesign 11 месяцев назад

Good work Mark, Sam and Harley 👏

@Les-yz8yb 8 месяцев назад

Thanks for all the videos you make I thank you do a amazing job

@dainermade 8 месяцев назад

Glad you like them! Cheers

@MrCabbageeater 11 месяцев назад

Mate that looks amazing. I don’t think anyone will notice the ummmn ‘check square’ issues. 😊

@MrCabbageeater 11 месяцев назад

@@dainermade LOLS....I like what you did there.

@silasdonham8320 11 месяцев назад

That looks amazing! I feel like it’s the culmination of all your veneer work but now solid right down through. (Who cares about square, anyway??) I hope all is well with your situation and you recover quickly - we’re pulling for you in Canada. As we say here, keep your stick on the ice.

@silasdonham8320 11 месяцев назад

Glad to hear that!

@SujMenon 11 месяцев назад

check square is just one of those 'minor' things. The best outfeed table it is then :)

@homesformeremortals5935 11 месяцев назад

Love the video mate. Also, I have to admit the outfeed table is the best idea. So probably stick with that. However, if you want to salvage it you could set up a jig to cut the waterfall edge square. You could use the table saw or set up a router as well. Either way I think its a win-win.

@MaryCumbersnatch 10 месяцев назад

A) You need that cool pneumatic nail remover that Jesper has. It'll turn that 90 minute removal time to 30 minutes. B) That pattern is beautiful!

@hugobose2254 11 месяцев назад

Mark, Can't wait to see it finished, Hope alls ok? And another great Vid BTW

@MikeyDreamerLam 11 месяцев назад

Pretty happy to have found another Aussie RU-vidr, subbed straight away 👌( I love recycling timber too) 😀.

@MikeyDreamerLam 11 месяцев назад

@@dainermade no worries at all and I’ve just found another one today too … Kuffys Woodwork.

@anthonyeslava7719 11 месяцев назад

Felt the sudden urge to stay up until 1:30 in the morning and I just found out why, it was worth it man. Thank you

@ulysee798 11 месяцев назад

If you knock the difficult nails in a bit it breaks the rust and makes them possible to remove (most of the time). Learned that from Izzy Swann

@SteveBellCreates 11 месяцев назад

Loved the vid that table looks awesome and I’m sure you will sort out any problems. Loving the idea of patterned pallet wood Also I hope your ok ?

@SteveBellCreates 11 месяцев назад

@@dainermade phew that’s good 👍

@michaelwillson6847 11 месяцев назад

M8 nice one maybe not as nice as a spiders wanger but still up there. 😅 Love the diagonal pattern and that new finish 😁. A no what u mean about loosing shop days am in that right now aswell kids off from school/nursery another 4 weeks!!😬😭 U ok though hope everything is gonna be right!! Were here for ya! 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@michaelwillson6847 11 месяцев назад

@@dainermade ohhhh interesting very interesting. It's orite m8 know your busy. Am having shop problems right now right in middle of another commission in the I'm loosing my shop!😬 Gonna need find new one quick smart. Can't wait for new video. Hope your staying well! Can u send some that sun round this side the world we've just got pissy rain!! 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

@ajskund 11 месяцев назад

Just found your channel the other day and love the content! Im just starting on my wood working journey. I picked up a nice pile of hardwood pallets, and have started to disassemble them. Now for my question. All of these pallets are put togethet with helical nails and have destroyed my pallet buster that i built and are putting up a HUGE fight compining apart. Any recommendations to better attack them?

@ajskund 10 месяцев назад

@@dainermade right on, I like his method of using a scissor jack. I'll give that a go for these more stubborn ones for the time being until I can get some heavier steel to make a bigger, better, stronger pallet buster

@mstev5956 11 месяцев назад

Great work as always - yes errors happen but hey…..it’s a learning process. Keep up the good work 👍

@richhubert1260 11 месяцев назад

BEAUTIFUL !

@woodworkingandepoxy643 11 месяцев назад

Always a good day when you post a new video. I don't have to watch old ones for the 40th time lol i hope things are ok bro. Take care of yourself first and foremost

@TomTheEnglishPicker 11 месяцев назад

Lovely stuff . I’ve never realised how similar you are Nick Z talk / present.

@TheWardagh 11 месяцев назад

Great job. All the best

@briansbuildsandoutdoors4936 11 месяцев назад

Almost an awesome job Dainsey, you were only out by thaaat much. 😂. Keep up the good work. All the best.

@kkatsa 11 месяцев назад

At 45° the balde highest point should be material thickness -half tha blades thickness. I guess. Measured from the table with a square. Correct me if im wrong.

@peteraust1968 11 месяцев назад

Good one mate. Hope all is well. Cheers..... Pete

@soj_89 7 месяцев назад

I feel like if you staggered the transition between different coloured chevrons on the slab, it would have looked even more awesome. Its a shame you forgot to make the waterfall tall enough though, it looks awesome and there must be loads of people who would love to buy it.

@dainermade 7 месяцев назад

Cheers mate! It’s all good. I will give it a new life soon

@IngridSomers 10 месяцев назад

Thank you for the video! My first question is: what software do you use to draw your designs?

@chemicaljuice3078 11 месяцев назад

Hope all goes well in the next few weeks

@stephenbeckett2281 9 месяцев назад

Hi Mark, really enjoying the videos so thanks for putting them up. One things that is on my mind is where/how to get my grubby mitts on a pallet buster. I've seen a few online and they look cheap and nasty and the reviews are not encouraging. Bunnings have something for just over $100 but it also looks a bit on the dodgy side and I'm not sure it would hold up under pressure (attempt at humor, sorry). Any suggestions would be appreciated. cheers... Steve

@dainermade 9 месяцев назад

hey Steve, best bet is find someone who can weld well and get them to make a robust one. there is a few on amazon that should be ok though. Cheers mate

@benlake5903 11 месяцев назад

I love it, I would buy it if I had the space for it. Looks anazing

@killer-kane 11 месяцев назад

To pull reluctant nails first heat the protruding bit with a blow torch etc, this burns the surrounding wood and voila the little shit will pull right out.

@samsboringchannel 11 месяцев назад

I think it still looks top drawer bro! Hope you're back at it asap.

@ericharvey9225 11 месяцев назад

WOW EXCELLENT DUDE !!!

@cadilacrich 11 месяцев назад

Love this man. Also, unrelated, but not: I just want to take a moment and thank you for not succumbing to the "clickbait title" trend. You are a champion, and I really appreciate you and your work.

@cadilacrich 11 месяцев назад

It has actually been a trend dating back to early journalism - just sensationalized/misleading titles to trigger people’s curiosity. Like ‘Every car owner should do THIS if they’re smart’ or ‘I don’t know why more people aren’t doing THIS’. When I go to RU-vid, I like to curate my own experience. When people are vague about what they’re posting just to get me to watch… just feels dishonest. There are plenty of hugely popular folks out there that just do what they do. Doesn’t happen all at once. You have a great vibe and will definitely find more and more success without gimmicks. Cheers

@AntiSerpent 5 месяцев назад

"Wonky As A Donkey!" 😹

@dainermade 4 месяца назад

lol... the struggle is real

@Lincolnstww 11 месяцев назад

Great vid!

@Lincolnstww 11 месяцев назад

@@dainermade I loved it!

11 месяцев назад

Parabéns pelo belo trabalho...😊

@danielcyngiel3691 9 месяцев назад

Brilliant!

@8eSix 11 месяцев назад

Mistakes happen. That's how you learn and grow. But I always cringe when people admit critical mistakes then proceed to sell their work for a few thousand dollars. I appreciated your repurposed outfeed table idea.

@hjboots 11 месяцев назад

Mistake's are a way of telling us we can`t alway`s get it right. With each mistake come`s a wonderful thing ( KNOWLEDGE ). That`s how woodworkers succeed in the venture`s of woodworking and then out come`s a piece of art. We stand back and find we are only human but we do produce remarkable thing`s. Great video and narration Thanks for sharing.

@BBGuitars 11 месяцев назад

Youll lose some overall width and a bit of height again but Id just reset your jigs and recut the side off the top at the joint while correcting the angles. Get them all square and 45 and re attach. Not ideal, but probably about the only way to really fix it.

@BBGuitars 11 месяцев назад

@@dainermade most gucci bit of shed furniture for sure

@wit6665 11 месяцев назад

Dang that top came out looking stunning

@scottbionicnerf8727 11 месяцев назад

You're right about cheep lumber/free, except for removing nails and staples and sh!t, and stuff. I've gotten upwards of 30 pallets and crates of various sizes and types mostly broken down and de-nailed/staples, and other sh!t, and stuffed, around my outdoor shed. I could easily fill a 10' × 16' shed with lumber of various types (Roughly 3.04M × 4.87M shed).. And didn't cost me a dime, except for getting off my arss, something I already needed to do and get moving and doing/accomplishing something. My wife loves the cool stuff I've made her. Now I'm going to start making stuff for sale and get an LLC.!!! It's not solely because of your inspiration mate' but to you've had no small impact on WoodWorking Hobbyist RU-vid watchers and stuff would be selling you short.

@shane555 11 месяцев назад

We all make mistakes buddy, try not to be too hard on yourself. Use it in the shop and it'll serve as a reminder to take your time, check twice and will therefore pay more dividends than cold hard cash ever could 😊👍 Love your channel and love your enthusiasm. Just subbed to Sam's channel too 💪

@FabianoChagas 11 месяцев назад

Awesome as always

@richardphillips3303 11 месяцев назад

That is amazing 👏 😊

@northernninjarunner5506 11 месяцев назад

Nice one Dainsey

@BJJStories1 11 месяцев назад

Hey I love the videos mark, Does pallet wood warp after a glue up ? Or does this not happen due to the small pieces ?

@michaelwillson6847 11 месяцев назад

In my experience I've done bit with pallet wood they don't tend to warp or least mine haven't anyway glued up onto legnths to make slab style you'll get little expansion and contraction but ave had no major issues. 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@Edtopia_upcycling_ 11 месяцев назад

Finally a new video ....was already on withdrawal 😁 and then with Sam 🤘🏻Cheers mate

@Edtopia_upcycling_ 11 месяцев назад

@@dainermade A new video? I'm excited and looking forward to 👍🏻😊

@markarmstrong2592 11 месяцев назад

AWESOME Mark

@MrNetAble 11 месяцев назад

Done another beauty mate! ))

@ralphsteven3283 11 месяцев назад

Awesome, A+...

@dig9237 11 месяцев назад

Freaking awesome. Love the pattern. To you maybe " Full Business Human", to me "Inspiration Personified ". Thank you, and best wishes for your break.

@philomenahearn1717 10 месяцев назад

Love it too ❤

@amwartwork 2 месяца назад

mr dainer!! Is that nail detector reliable? im in the same setup as you are but in scotland uk. I dont want to destroy my blades on my thicknesser. i remove ALL nails and theres always one that goes a miss to the eye. please let mi know how good or bad that detector you use is. Cheerz!!

@dainermade 2 месяца назад

It is very good mate. Finds tiny shards in the nail holes all the time