Turning an HP DPS800GB power supply into an RC Bench Power Supply. Your cheapest power supply option

Подписаться 17 тыс.

Просмотров 107 тыс.

50% 1

You can now buy these already wired: bit.ly/HPDCPowerSupplies
You can get one right now: geni.us/IAX9m
And the Banana Plugs: geni.us/4mmBananaPlugs
Check out my current giveaway: geni.us/DroneRacer101Rewards
This is the charger that will be reviewed soon that needed more power: bit.ly/2WarriorGo4Dual
The original information to do this was found here:
www.rcgroups.com/forums/showt...
I needed more power to power my Lipo chargers. My 5Amp power supply was not able to do it any more. Being a cheapskate I didn’t want to spend a lot of money on it so I found what I think is the cheapest option that will supply all the power I ever need. This power supply goes by a lot of different names, DPS800GB, 403781-001 and 379123-001. This process will work for any of them. They are exactly the same.
If you want to get started in RC drones this is my current recommendation:
Eachine E010S Camera Drone: bit.ly/E010S
Make sure you pick the receiver that matches your radio
and extra batteries
Extra 45C E010 Batteries: bit.ly/45CMulticharger
If you need a radio get one of these:
Beginner Flysky Good Radio: bit.ly/FlyskyFSi6X
or
Expert FrSky GREAT Radio: bit.ly/TaranisX7
Get one of these googles:
Entry Level Budget Goggles: bit.ly/2eFsNaF
Eachine Upgrade Goggles with DVR and Diversity: bit.ly/ev800d (These are the best option)
Aomway Commander Goggles with DVR, Diversity and Headtracker: bit.ly/AomwayCommanderV1
Subscribe and be a DroneRacer! : / @simracer101
Enjoy & remember to like and subscribe!
-- Find DroneRacer101 Online! --
Facebook: / droneracer101
Twitter: / droneracer101
Instagram: / droneracer101
“Droneracer101 is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.”
-- Credits --
All titles and images created by DroneRacer101
The tiny little clip for Revenge of the Sith belongs to Disney, or Lucasfilm.

Хобби

Опубликовано:

28 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 150

@SimRacer101 7 лет назад

You can get one right now: geni.us/IAX9m And the Banana Plugs: geni.us/4mmBananaPlugs Check out my current giveaway: geni.us/DroneRacer101Rewards

6 лет назад

(3:20) Always solder one end, then cut to length. You'll be at the exact length when you cut it, and you'll have more to hold when you're making the first connection.

6 лет назад

(6:30) you'll find that easier if you heat the pad then touch the solder to it. and it's not sodder it's soLder

6 лет назад

(12:30) No ... just No... that is a cold solder. To properly solder, you heat the component and add the solder thread to it. You need a much bigger soldering tip to properly work with that size of component. Please don't encourage people to solder the wrong way, you're encouraging dangerous connections and putting people at risk of electric shock. PLEASE STOP Learn how to do it correctly before you endanger other people by teaching them the wrong way.

@JoshWeaverRC 5 лет назад

@ You must have xray vision through a video.

@minibikemadman 2 года назад

The banana plug link is dead i need some..what type bananana plug are they called?

@halleffect1 4 года назад

Hi, thanks for loading this up. my friend gave me an HP 800W months ago but I was too lazy to read RCG to figure out the wiring. your instructions were clear and I was able to solder directly on the pins and get it going in no time. hooked up to a 400W lipo charger and works perfect.

@chksix 5 лет назад

Thanks for the inspiration. Works like a charm, but I realize it could crap out at any moment. I soldered 3 charging leads directly to the tabs. Running three chargers simultaneously at full capacity and it didn't miss a beat. Two 80 watt 10 amp chargers and one 100 watt 10 amp per channel dual charger. I couldn't be happier with it.

@gustavinus Год назад

A paste flux on those pads before soldering helps so much. That thing changed my life. LOL Makes it so much easier.

@johnsonbo1 2 года назад

Great video! Im looking to see if I can use these in my workshop for car audio testing.

@markecklund3125 6 лет назад

I was headed in that direction as well. Just thought I could complicate things a little.... It's how I roll!!!

@blue03r6 4 года назад

you should just drill a small hole through that #2 terminal then use a small metal wire through the hole as if it's a diode or resistor lead though the board. will be a cleaner job. do the same thing with the big connectors. drill through the board and use the nuts to hold it on. no need to solder. or you can solder it way easier.

@malteser0212 5 лет назад

(i plan on doing this soon, therefore i watch your old video) I guess i will connect thick cables on the contacts an then connect the cable to the desired contacts. and i recommend this too, because soldering wire is always easier than full copper connections.

@kyocreations7938 6 лет назад

Awesome vid, I made this to supply 42A to my Peltier cooler and it didn’t drop below 12.3V👌🏼

@SimRacer101 6 лет назад

Nice, I haven't gotten to push mine that hard. Good to know.

@ElectrifiedStud 5 лет назад

It probably has gold plated on the terminals both on the ps & the barrel connectors, and also leaving it threaded 'actually' give more contact than grinding it off to a flat lesser surface area. it is the solder that is creating creating the electrical bondage between the both terminals, so more the corrugation the more the surface area.

@RoadRunnerMeep 5 лет назад

Server class power supplies are great for powering circuits. They're designed for huge power draw

@GermanOldMetall 5 лет назад

Can you please show the assambling and the insulation from negative ground for an 24V series mod.? Best regards from germany!

@nomadchad8243 5 лет назад

I also just snagged a couple of these. Yoink. Can these be turned on by a momentary switch like a regular desktop psu.

@robertpoynton9923 6 лет назад

I have a similar power supply how do I find out if the Convertion is the same? I think it’s a super micro

@pfoxhound 4 года назад

You need to grind down part of threads and solder after contacts touch flush.

@mikebutlermedia4211 6 лет назад

Is it possible to get just an edge connector to fit the card, and save all that soldering?

@ronsafranic5177 3 года назад

You need to add a micro butane torch to your soldering equipment for when you need to solder something that soaks a lot of heat! A large Weller gun style soldering gun will also work.

@Jpilgrim30 6 лет назад

I use my soldering station for most things but this is a perfect job for a 300 watt weller soldering gun.

@SimRacer101 6 лет назад

Totally agree. When I got started all I had was a soldering gun.

@Snipes287 6 лет назад

Id love to see a 24V version! Of all the PS builds ive seen it seems these specific PS are by far the easiest to convert. Are the fans thermal controlled or full speed all the time?

@nettunaccio 6 лет назад

hi friend, I use this psu to power a 3d printer. The 5v output is used to power a raspberry with octoprint. Can I ask you if it is normal for this standby psu to heat up? Only when I activate the psu to get the 12v then the psu cools with its fans. In standby the fans are off and then the psu heats up

@mrteausaable 6 лет назад

How can your Amp meter get the Amp reading using the clamp? The clamp is for the AC current only. To measure DC current you need to connect in series using the probe. I am puzzle how you measure it?

@thanhlam1710 5 лет назад

Can you guide people how to turn Server PSU to Desktop PSU 24 pin to use for m-atx or itx motherboard?

@ptidom29fr 3 года назад

Hello, I made the same. But I have a problem with the PSU 0-12V, there some shortcurt or something else, an electric arc beween the negative and the +5v pin.

@DirtNerds 5 лет назад

I have a control board that works and voltage adjust mod on the same board. has anybody figured out how to make them master and slave so you can use one voltage reference for adjustable voltage when using multiple power supplies?

@ApexTalk1 4 года назад

Did you do anything to isolate the case in any way from mains voltage?

@criptobits282 4 года назад

I messed up with my soldering, is there another way to jump it and turn this PSU online?

@HIFONICSM3 5 лет назад

Hello show us the 24V version please thanks

@QuebecoisSti 6 лет назад

I got same issue as Mike Philips below. I got 3 psu, 1 is working, others works few minutes ok then shutdown after few minutes (the voltage is fluctuating between 2 to 7V) i don't understand why is it happening ? Can't find anything on RC forum why this problem occur

@R.B_B 9 месяцев назад

Anyone knows what type is that flat screwdrive they use that solder don't fix to it?

@leehudson1384 5 лет назад

Is that power supply particularly noisy when under load?

@eshmikity 5 лет назад

I too have a pile of these. Please make the 24v

@macdemarco1476 4 года назад

would 441830-001 - HP 1200W Power Supply for Proliant DL580 G5 be the same process im asking because when i plug it in it does power up so wondering if i still need to run all the cables thanks

@jrb8081 6 лет назад

Hi I like your tool to press that solder will not stick onto can you please let me know whare I can get one thanks . PS great charger set up now I am going to your other video.

@jstump1972 7 месяцев назад

I have the dps 750ab and this not working on that one, any ideas?

@jstump1972 4 года назад

Ive done the initial 2 wires on mine no green light or power

@Siktah 2 года назад

Where would you suggest a switch to turn this on and off?

@kiwigeeknz 2 года назад

Could you just drill the posts through the pads to take advantage of contacts on both sides?

@kevinsajadi2879 25 дней назад

Hi There is some videos in youtube showing dell or hp psu hot plugs convert to bench power suply. They could run the psu hot plugs by connecting some pins but they just could run them to take a small curent not the maximum curent. Could you please tell me how to run my "hp 2450w hstns-pr16 platinum hot plug" and "hp 2650w hstns-pr42 platinum hot plug" into a bench power suply to take the maximum curent and power? Kind regards Kevin

@darumaprb8500 2 года назад

men I buy one of those and put it a resistor to 32 to ground like others video clips and what happen was it blows something inside ,it hurt me because it was brand new ... first I put the jumper and the resistor and plug to the outlet and the light ,don't the start ,but the fans work , I take Out the resistor and star great but in 2 min blows inside ...the damage was done ,...

@roystervi 2 года назад

I got 2 "DSP-800GB A" I jumper the the 2 2nd pin to verify the fan comes on and it did. However, without the 2 2nd pin jumped I forgot to unplug it and it was plug in over night, the next day it was hot as hell. as it does not have 12v while the 2 2nd pin is jumper, it seem as if the transformer still hums and heat up. can anyone verify this or do I have a bad PSU. thanks in advance.

@mohanmanna3076 2 года назад

Very helpful please make video server power supply repair

@wilmeran 7 лет назад

Perfecto lo q necesitaba de mi fuente HP1000Watt .

@robertdrinkall8947 6 лет назад

Good job, FYI : That's one of the 1000W ones. HP supply them in three wattages =800/850/1000 w.

@gustavinus Год назад

But only 1000W when running in 220-240V I think. 110-127V is 850W and 100V is 800W. That is what is written in the label. Here in Brazil we have both 127V and 220V pretty much everywhere, but here in my region we use more 127V (220V only in some places). So mine will run in 127V / 850W.

@jstump1972 4 года назад

Thank you

@jdsstegman 3 года назад

You should try using flux. It flows better!

@rafaelfinger2750 3 года назад

Muito obrigado!!! Tank you!!!

@cnnlt200 2 года назад

Hi. My dps-800gb had the fan blocked for literally 0.5 seconds. It shut down. And the green led doesn't comes on anymore. What can I do? Is there a way to reset them? I have 2 of them in in series. So 24v It surely wasn't overheating. Only hat my charger on it with no load.

@gustavinus Год назад

Using this PSU nested inside an HP Z800 power supply case. The power supply for those workstations cost a lot and sucks a lot. So, just re-routed all cabling from the old PSU case to the new PSU. The power supply for the HP Z800 is like a drawer that snaps into place with 3 connectors. So basically making the "DPS-800GB A" feed those 3 connectors. Was quite the pain to join all those cables, but next time I have only some 9 cables to re-solder into the new PSU. And the new PSU is A LOT better and cost 1/3 of the price of the HP Z800 PSU. Would be nice to have a plastic "connector" for this PSU. I wonder if it is possible to print one and add copper contacts...

@guilhermeagnelli8399 2 года назад

I don't speak English and I'm following your video only by the images, can you please tell me what the purpose of the blue thread is?

@madyicstik 5 лет назад

did you ever made a 24v video?

@minibikemadman 2 года назад

Banana plug link is dead. I have 4 1200 watt server power supplies im building one big one.

@jasontucker4821 6 лет назад

Hello and thank you for posting this video. II doubt I'm speaking for myself when I say that I am a visual person. Following steps in a blog is a lot more difficult than pausing a video. I do have a problem I hope you can help me with. I have the exact same psu that I am working on. Only differences are that mine is a Fujitsu brand and has one large fan on the end instead of 2 smaller ones. My problem is when wired up the way you demonstrate I only get 5v output and my light, although is green, flashes instead of constantly on. It acts as though the psu is happy, it's just missing a little something. Any help would be greatly appreciated! Thanks again

@SimRacer101 6 лет назад

What is the model number on the power supply?

@jasontucker4821 6 лет назад

The model number is the same. It is a DPS-800GB-5. It also says it is a Rev. S2F. I'm not sure if maybe the revision number makes a difference or not.

@enginaras2605 2 года назад

Hello, I have atsn 7001044 but I could not run it. I looked at all the videos and documents on the internet. It works when you plug the device into the server. Could you help?

@bobmutchseo 5 лет назад

very good video, can you do a vid of linking 4 or 6 of them together : )

@amessman 3 года назад

If you mean in parallel, just wire it like any parallel supply. If you mean in series, you probably shouldn't do that.

@billysgeo 2 года назад

Metal to metal contact will be accommodated by the solder. You are confusing it mechanical/structural integrity

@RayMerrell68 6 лет назад

This can be done with any PC power supply. ...and you can get 24v out of a bog-standard PC power supply too.

@Pvt_Shepherd 5 лет назад

Thank you =)

@Phillips942 7 лет назад

Using your configuration the PSU comes on when plugged in however it shuts down after a minute or so. Do you have any idea why? It is a brand new PSU, the same p/n 3791230=-001.

@SimRacer101 7 лет назад

+Mike Phillips Did you check the voltage output? 12ish V? Have you tried putting a load on it?

@Dropoff510 7 лет назад

Mike Phillips where you able to resolve the issue with the power supply?

@Phillips942 7 лет назад

I purchased a second one and had no luck AGAIN so I purchased a different model that i knew would work. DPS-750RB-A works like a charm with my iCharger

@CareLESSmAyhem 6 лет назад

How could you wire this up in series? Is it as simple as wiring it up in a 2s configuration? or do you need to release a safety mechanism?

@SimRacer101 6 лет назад

You can, but there is a very specific process to do it correctly. I recommend reading the RC Group listed above and they detail the process for wiring it.

@OtherDalfite 6 лет назад

A good video I've found on this topic is here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aL8lcJ69mkg.html. Not sure if it is this exact video but his series covers the topic of floating the ground of the cases of the PSUs. Theres a lot of science behind how this works but its pretty easy to accomplish in reality, just be really careful as you may have to go near some big capacitors.

@CareLESSmAyhem 6 лет назад

OtherDalfite, Thanks but turns out that this power supply doesn't require you to do that to wire up in series. It literally just as simple as wiring it up on a 2s config to get double the power.

@danman7665 5 лет назад

@@CareLESSmAyhem Just watch out if you do. If any of the two supplys gets deffective the casing might transfere 210Volts. Make sure you disconnect the DC grd on one of the supplys if you put them in series.

@markecklund3125 6 лет назад

Just ordered a pair of hp dps-750rb PSU units fro EBay and it was like $20 total!!! Can't wait to try your mod on mine!! Thanks for the useful vid. Quick question... Is a resistor necessary, or just that short jumper wire??

@SimRacer101 6 лет назад

I did not use a resister. It’s just wire. Some of the diagrams did have one but I didn’t need it.

@markecklund3125 6 лет назад

Sorta considering a power switch once they arrive...... Not too convinced I would REMEMBER to unplug after use.... Ever build one with an add on switch???

@SimRacer101 6 лет назад

I have mine connected to a surge strip and I just used the switch on that. Made it really easy.

@sickomodes6422 5 лет назад

best recommend power supply for car amp true rated power output

@junaidgt90 4 года назад

Mark Anthony Great minds think alike. Same here. Also have seen some ready-made plugs that can be attached to activate them and to have many 12v supply ports...that ppl are using for bitcoin mining. What do you think about it??

@jventeruiz 5 лет назад

Saludos, una pregunta alguien sabe para que es el cable largo azul ?

@leandrozacovichi5537 3 года назад

Supuestamente para.medir el voltaje.

@flyinphynixfpv5980 7 лет назад

I have an iCharger 4010 Duo; would this work for my charger? As a side note, I finally got my Lizard95! Unfortunately it totally pooped out on me in the middle of setting it up. :( Hopefully BG will send me a new one. GREAT video as always and keep up the awesome videos!

@SimRacer101 7 лет назад

+FlyinPhynix FPV it will work, but may not be big enough if you are pushing that thing to the max. Like charging huge heli batteries. For that you need a pair of these hooked in series to get 24V. There is a very specific process for that. It can be done but you have to be very careful.

@flyinphynixfpv5980 7 лет назад

Awesome, I won't be pushing this thing to its limits at all. I just charge 2s-4s racing quad batteries in sequence with each other. Thanks for the instructional video. Really enjoy your channel!

@dimitrijekrstic7567 3 года назад

The "metal to metal contact" that you are talking about at around 9:25 is wrong because the solder is what's making the contact. What you should actually be worried about is the mechanical strength of that connection, because you are going to be plugging things in and out, and solder is not that strong. Edit: you need nowhere near the pressure and time that you used when tinning the banana connector, what you needed there was flux. When done right, solder flows easily and quickly, and by done right I mean bigger flat tips for the soldering iron, and clean surfaces to solder, and that's achieved by using the flux that I already mentioned.

@The52brandon 5 лет назад

My most powerful iron (300W) is my cheapest. My expensive ones are high precision, not high power

@rinopravato1285 3 года назад

gracias.

@marrocos888 6 лет назад

i'm from brazil. thank you very much.

@guilhermeagnelli8399 2 года назад

bruno pode me ajudar? Porque foi soldado aquele fio azul???

@rsagro426 4 дня назад

@@guilhermeagnelli8399 eu também nao entendi direito, ele disse que é para medir a voltagem, estou com medo de ligar, tem videos que falam para soldar, outros que usam resistores e uns que nao ligam nada, pode me ajudar ?

@MAD20248 3 года назад

can i do the same thing with this power supply HP 578322-B21 579229-001 570451-001 1200WPower Supply DPS-1200FB-1 A?

@eliotmansfield 3 года назад

get a couple of inches of microbore copper pipe, hammer it flat to make a buss bar, bend it 90’, solder one end to the edge connector, drill a hole in the other end and screw the banana jacks on

@webster7070 7 лет назад

Nice tutorial! I maybe want to do this too but the link for the power supply is broken.

@SimRacer101 7 лет назад

What country are you in? This is for Amazon US so sometimes it's hard to get setup internationally.

@miketech2 7 лет назад

DroneRacer101. Link doesn't work for me either. I'm in US

@webster7070 7 лет назад

DroneRacer101 I am from Germany

@hendrikjanssen5133 6 лет назад

Hallo, hast du dir die power supply in der zwischenzeit geholt und umgebaut, wenn ja dann berichte mal ob es funktioniert.

@jamieclark3204 6 лет назад

Have you tried 2 or more in series to get more amps?

@mikebutlermedia4211 6 лет назад

In series would not give more amps, it would give twice the voltage. In parallel would be the way to get more amps.

@SimRacer101 6 лет назад

I haven’t yet. I haven’t had any need for the higher voltage. Mike is right, in series will make it 24 volts. The bigger chargers require higher voltage to charge the bigger battery packs like the 8S packs Heli guys use. But but for drone chargers there really isn’t a need.

@xyzebruh1083 7 лет назад

lol, I have been using my old xbox 360 power supply for my lipo charger, same idea reusing old or everyday power supplys

@SimRacer101 7 лет назад

Clever, looks like those are 200Watts and 12Volts. Thats pretty good.

@xyzebruh1083 7 лет назад

thank you, it works great for my needs

@HYEonDEATHROW 5 лет назад

Great idea. I have a few of those due to the red ring.

@RonnFolk 5 лет назад

Or... you can do a Ebay search for "DPS-800GBA Power Supply Adapter board RC, HAM Radio" for a plug an play solution. I think they cost about $17.00

@mark98115 5 лет назад

try 3x that amount

@AngryMarkFPV 7 лет назад

This soldering tool... That looks suspiciously like a flat head screwdriver that is hardened steel... *facepalm*

@SimRacer101 7 лет назад

That is just one tool from a kit similar to this. www.banggood.com/WLXY-6-In-1-Soldering-Aid-Tools-for-PCB-Repairing-Rework-p-930510.html?p=EB070918823112015072

@AngryMarkFPV 7 лет назад

Fair enough. that one your using just looked exactly like a flathead screwdriver though hahaha

@SimRacer101 7 лет назад

+ScarfaceFPV true. I think I cut the part where I showed the other side.

@AngryMarkFPV 7 лет назад

All good. Looks like a wicked power supply though. I was lucky enough to have an old 10amp 12v psu from a 3d printer I once used to use, It works well, but not quite as beefy as this. :)

@MrMorbo420 4 года назад

Drill thru the PCB and mount the plugs thru hole style. Also use some 12Ga to tie them to the output lugs close to the blades. lots of different ways to skin that cat.

@arconeagain 3 года назад

They don't advise drilling this multi layer board.

@MrMorbo420 3 года назад

@@arconeagain huh, worked fine for me. guess i got lucky

@nadirsiddiqui9559 5 лет назад

Hi, I had done the same with my power supply, but it does not provide 12 volts, only 3.3v and 5v are coming and 12v are not available. Is there any fuse or anything which is inactive and interrupted 12 volts??? Fan is working and green light is off.. Please help me.. Thanks in advance

@pavelbires 5 лет назад

Hi! Check the output double diodes! And 12v output capacitors. Keep me updated please!

@pavelbires 5 лет назад

Which supply is it? Like this one in video or classic PC PSU?

@nadirsiddiqui9559 5 лет назад

@@pavelbires I have solved my power supply issue, now Its working fine. :)

@ferreec 4 года назад

have you solved the problem? i have the same

@ferreec 4 года назад

@@pavelbires where are Double diode and the output cap? i have no 12v on the terminals but 5v..on the small conector..fans turns on..

@informediatech-bruno5766 3 года назад

you should have removed the thread on the plugs, it would be a much better mechanic conection

@shatterpointgames 3 года назад

The issue with this is that it's 12v you need 24 volt

@informediatech-bruno5766 3 года назад

charging a battery at 6 amps ?! do you want to burn down your lab?

@GroovyVideo2 6 лет назад

thanks for info - your soldering skills need much improvement

@blue03r6 4 года назад

just needs a bigger tip for the big stuff. to be honest he should just drill a hole and bolt them to the board.

@dimitrijekrstic7567 3 года назад

@@blue03r6 nah, using pressure, dirty tip, wrong tip, not using flux, all of this except the flux is wrong, flux is optional, but it would definitely make his life easier

@SaifMusazai 5 лет назад

12v is not sufficient to charge a battery. Ooopsss.😊😊😊

@PierreUsedToPost 4 года назад

I'm surprised there's no comments about how ridiculously dangerous this is. It's good that you covered the exposed leads at the end but the ones being sold at the link in the description seem like they have giant exposed leads. 800W at 12V is more than enough to kill you. You should at least include a warning in your video, soldering those small wires is to work around a safety feature that is supposed to keep the 12V rail low while it's not plugged into the server.