Tutorial for DIY Line Print Table

Подписаться 1,6 тыс.

Просмотров 153 тыс.

50% 1

Here's how I made my 6 platen line table for screenprinting. See my post for more details: www.shellycreatesit.com/blogs...
0:00 Intro
0:08 Where to find Platen plans
0:15 Cost & Supply list
0:38 Steps
0:55 B-Roll of Line Table
1:09 Platen sizes
1:30 Registration on Platens
1:48 Where to place brackets for support on platens
2:00 More B-Roll & Closeups
2:40 Screen alignment preview
2:45 Placing Negatives for burning
3:00 Timelapse for negative alignment
3:27 Ending
Table inspiration by OneTrickPony: www.t-shirtforums.com/screen-...
❓
WANT TO LEARN MORE?
- Join the creative club: t2m.io/zd51m1MX
- Skillshare(Get 2 months of premium free) www.skillshare.com/r/profile/...
My courses: Screenprint Supplies: skl.sh/2xQHaXb
Screenprint Setup: COMING SOON!
Screenprint Storage: COMING SOON!
- Udemy: COMING SOON!
🛒
SHOP MY PRODCUTS:
- Website: www.shellycreatesit.com
- Design Bundles: designbundles.net/shelly-crea...
🔠- Font Bundles: fontbundles.net/shelly-create...
⌨
MY PROGRAMS & TECH:
- Design Software from Adobe Creative Cloud: clk.tradedoubler.com/click?p=...
- Silhouette Cameo Supplies: kit.co/michellebkolo/silhouet...
🔠- Font Creating Software for Illustrator (10% off with this link) fontself.refr.cc/kolodziejczykk
🖨- HP INSTANT INK: (get 1 month free!) try.hpinstantink.com/jpR2z
Look at FAQ's to see if your printer is eligible: store.hp.com/us/en/cv/instant...
🤑- www.shopify.com
📷- Photo & Video Gear: kit.co/michellebkolo/photo-vi...
- Grammarly: I’m a horrible speller! www.tkqlhce.com/click-9118116...
👕
SCREENPRINTING INFO:
- DIY home screen print PDF for Supplies: bit.ly/2YKYDLG
- DIY Line table supplies: kit.co/michellebkolo/screen-p...
- DIY Screen Burning Supplies: kit.co/michellebkolo/screen-b...
- DIY Wood Silk Screen Supplies: kit.co/michellebkolo/supplies...
- DIY Filtration System Supplies: kit.co/michellebkolo/screen-p...
- My water based ink supplies: kit.co/michellebkolo/water-ba...
- Favorite Blanks to print on: kit.co/michellebkolo/screen-p... OR www.shirtsinbulk.com/?affilia...
♥️
WHERE I GET DIGITAL RESOURCES & INSPO:
- Design Cuts: www.designcuts.com/?ref=miche...
- Master Bundles: masterbundles.com/?affiliates...
- The Hungry JPEG: shareasale.com/r.cfm?b=707299...
- Craft Bundles: shareasale.com/r.cfm?b=124367...
💬
CONNECT WITH ME:
- Behance: www.behance.net/michellkolodzi1
- IG / shellycreatesit
- IG / shellycreatesit_digital
- FB: / shellycreatesit
- EMAIL: shellycreatesit@gmail.com
🎶 Music: Stay With Me
by Valesco
soundcloud.com/valesco1
*Please note that some of the links are affiliate links and I do receive a small commission from products and subscriptions purchased. Thank you for your support! 🤗

Хобби

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 88

@peoplecallmepeechez 6 месяцев назад

Having done all my screen printing in tshirt shops, using a carousel press, its always so fun to see the plethora of ways people can print with the screens. I remeber the first time i saw a video of someone blew my mind how simple it can be

@ShellyCreatesIt 6 месяцев назад

Yes!! It really is amazing. It took me a while to wrap my mind around it too.

@alexa__bliss8040 5 лет назад

Shelly I'm proud to say that you might have the best diy screen press table video on the tube!!! Thanks so much for the video and thanks for responding KIRK :)

@ShellyCreatesIt 5 лет назад

Thank you for the comment! I'm glad it was helpful!

@yourunclesam6780 4 года назад

Wondeful desciption.thanks

@ShellyCreatesIt 4 года назад

Thanks and welcome

@maschineneschi8834 Год назад

Ich suche schon lange nach so einen Tisch. 😊😊

@ShellyCreatesIt Год назад

Eindrucksvoll! Schön, dass Sie etwas Hilfreiches gefunden haben. Awesome! Glad you found something helpful.

@kavijoe 5 лет назад

Hi Shelley! Thank you for sharing your video. Very helpful!

@ShellyCreatesIt 5 лет назад

Thank you!

@yosefsablon Год назад

Thank you for sharing your video. God bless

@ShellyCreatesIt 6 месяцев назад

Thanks for watching and commenting :)

@yemarican 2 месяца назад

Thank you very much.

@ShellyCreatesIt 2 месяца назад

You're welcome

@mac222 3 года назад

Thanks

@New2RC86 8 месяцев назад

Amazing

@ShellyCreatesIt 6 месяцев назад

Thank you!

@BharathiBharathi-yr2ss 5 лет назад

Good job

@ShellyCreatesIt 5 лет назад

Thank you!

@t-giandgaspito3791 4 года назад

Very good

@ShellyCreatesIt 4 года назад

Thanks

@joeystyles8128 2 года назад

Thank you

@ShellyCreatesIt 2 года назад

You're welcome!

@chobrima 4 года назад

Nice! keep sharing - spread the love - new friend here 🤗

@ShellyCreatesIt 4 года назад

Thanks for visiting

@floomhoodertribez5030 3 года назад

Nice tutorial new friend here..stay safe..

@ShellyCreatesIt 3 года назад

Thanks for watching! Stay safe as well!

@nightshifthoops 5 лет назад

Thanks for this! How do you make the notches so percise in the wood? What did you use to cut it

@ShellyCreatesIt 4 года назад

My husband did it with a router. We measured each piece (because the sizes of the wood vary slightly) and cut out the same size notch for each location.

@Imperialprince1018 4 месяца назад

Hey Shelly I have a question. On you diy line table did you add a micro registration for multi color and if so how do I do it as well?

@ShellyCreatesIt 4 месяца назад

I attempted to with bolts in the middle bar. But it would typically work as long as my films were burned correctly, the screens would always line up. i just had to make sure my shirts were squared off. Here are some examples: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-661QwlAmKBs.html and ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0VM7b1y99lA.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-N0bBM4t7qf0.html

@prodby7anaka 3 месяца назад

hello thanks for the video, cant seem to see the plans could you kindly assist

@ShellyCreatesIt 3 месяца назад

Here are the plans that I found on the t-shirt forum. drive.google.com/file/d/1svIjeXDLm8PO-IrFzdY8innI5jGaexWR/view?usp=drivesdk The full discussion is here: www.t-shirtforums.com/threads/d-i-y-line-table-and-screen-stretcher.359930/

@rence822 5 лет назад

great job, i see the top dowel, but how do you keep the screen from moving from side to side

@ShellyCreatesIt 4 года назад

The screen is flush against the middle bar, therefore does not move from side to side.

@mheetu3909 3 года назад

@@ShellyCreatesIt How well does it handle multi-color prints? I'd think the wood on each frame would be slightly different so that system would be off a bit without some sort of flexibility for micro registrations/adjustments. I think a 2-peg system with the screens calibrated to the exact same positioning using adjustable brackets would render better results.

@ShellyCreatesIt 3 года назад

I align the screens to the design and burn the transparencies, therefore the screen discrepancies don't effect the alignment. I can understand the difficulties.

@armanahmed3643 11 месяцев назад

Good

@ShellyCreatesIt 10 месяцев назад

Thanks!

@mightyquinn5135 4 года назад

Can you do a more detailed video on how to register multiple colors with this system. Im still confused

@ShellyCreatesIt 4 года назад

Sure! I'd be glad to. :D thanks for asking

@METALSKINMETAL 2 года назад

Curious, would you be able to use standard 24x20 aluminum frames with this system?

@ShellyCreatesIt 2 года назад

Great question! I should get an aluminum frame and try it! I would say, 'yes.' Make sure your platens and spacing between them fit the 24x20 frame size. For alignment, (if you don't want to drill into the metal frame) you can put all the alignment on the center bar. Maybe have 2 brackets or bolts that the screen fits between and sits flush against the middle bar. It doesn't allow for micro registration, but if every platen is square and the screens align the same way, and you burn the screens correctly - you won't need micro registration.

@aclassic5087 5 лет назад

Hi Shelley, just wondering if the 2x2 holds up to the pressure of the putting the ink onto the shirt with the screen when pressing? Thank you.

@ShellyCreatesIt 5 лет назад

The 2x2 seem to hold up well. There isn't a lot of pressure when I print because I don't want the ink to bleed through the tee. I also placed at least 3 to 4 l brackets under each platen to hold the 2x2 to the platen. So far it seems sturdy enough and I've been using for nearly 10 months.

@lukereeby8566 5 лет назад

@@ShellyCreatesIt ARe you using mostly plastisol? love the design will give it a go if it can halde pressure using waterbased

@ShellyCreatesIt 5 лет назад

@@lukereeby8566 I am mainly using water based. Not sure when... or if I'll move to plastisol inks.

@ShellyCreatesIt 5 лет назад

I'm in the same situation. Love the waterbased inks, but I'm doing a jersey order now where I am having to try plastisol. Fingers crossed it works. It is definitely different than water based!

@stevennoynay5698 5 лет назад

Hi can you include in the description the layout i cant print the layout. thanks.

@ShellyCreatesIt 4 года назад

There is a link in the description to access the plans. Also another user has shared a google drive link here: drive.google.com/file/d/1svIjeXDLm8PO-IrFzdY8innI5jGaexWR/view?usp=drivesdk

@krunpurnell5829 5 лет назад

Where did you get the center bolts from

@ShellyCreatesIt 5 лет назад

You can view my screenprint table Kit here to find the dowel rod used for the center peg. kit.com/michellebkolo/line-table-supplies/3-16-dowel-rod-nail It's a 3/16 in dowel rod that we cut into 3 in sections and glued into the center 2x2 board. We also sanded/rounded the top to make the t-bracket easy to slide on and off.

@JanetteGailFrancis 4 года назад

Your link to the "discussion" forum with the alleged "plan" only has a very small thumbnail image, not the full jpg

@LuisCasstle 4 года назад

It's there, click on it. Or left-click and save as. That's the easy part, good luck with the build.

@ShellyCreatesIt 4 года назад

You can create an account and it will give you full access. Another user has also shared the link to google drive copy: drive.google.com/file/d/1svIjeXDLm8PO-IrFzdY8innI5jGaexWR/view?usp=drivesdk

@jmags03 3 года назад

May i ask what size of Screen Frame do you use? TIA...

@ShellyCreatesIt 3 года назад

I have three speedball screens that are 13.5" tall x 9.5" wide, and four homemade sizes: (H x W) 9.5" x 7.5" 11.5" x 9" 16" x 9"

@kevoncarter750 Год назад

what did you use to cut the notches in the wood?

@ShellyCreatesIt Год назад

We used chisel and hammer to notch it out. You could probably use a saw or a router to get the bulk and clean it up with chisel and sandpaper.

@kevoncarter750 Год назад

@@ShellyCreatesIt I also was having a hard time trying to find the pdf on how to build it. I seen the link but I didnt where to download the file at

@ronaldsison4847 4 года назад

Do you have the link for the print out?

@ShellyCreatesIt 4 года назад

Yes, It is in the description. Also, another user shared this link: drive.google.com/file/d/1svIjeXDLm8PO-IrFzdY8innI5jGaexWR/view?usp=drivesdk

@arnabdeb1541 5 лет назад

Nice plan, but where to get the T thing (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FK-tfpFUmVM.html), that you have attached on your frame, which goes down in a pin?

@ShellyCreatesIt 5 лет назад

Thank you. I place a 3 in x 3 in Zinc-plated T-Plate by Everbilt on each of my screens to place over the pin. I purchased at Home Depot. www.homedepot.com/p/Everbilt-3-in-x-3-in-Zinc-Plated-T-Plate-2-Pack-15169/202033997

@gamesdropby6076 2 года назад

Hi shelly. This is so nice. Btw what is the size of you screen?

@ShellyCreatesIt Год назад

I somehow missed your question! Thanks for asking, I have three speedball screens that are 13.5" tall x 9.5" wide, and four homemade sizes: (H x W) 9.5" x 7.5" 11.5" x 9" 16" x 9"

@faustoramirez1884 2 года назад

Hey what type of ink do you use

@ShellyCreatesIt 2 года назад

I use Speedball water based ink. kit.co/michellebkolo/water-based-ink-for-screen-printing

@itsamgraphics 3 года назад

Hi! The website link does not work. Are you still in business?

@ShellyCreatesIt 3 года назад

Here's my temporary website: shopshellycreatesit.com/ I was playing domain & messed things up! Should have previous (shellycreatesit.com) up and running by August 20th, 2021! Thanks for understanding!

@itsamgraphics 3 года назад

@@ShellyCreatesIt thank you for the update

@guetyjoseph1567 5 лет назад

Thanks a lot a lot Shelly.. i wanna talk To you ? How can i join you.. i have a table like this. How do you manage off contact..???

@ShellyCreatesIt 5 лет назад

You can comment back/forth here, or you can email at: shellycreatesit@gmail.com I have only used water-based ink up until this past week, and haven't needed to have off-contact. I am currently printing a jersey order with Wilflex Poly White and I'm finding that I need the off contact. There was another comment on my channel suggesting placing a washer on the dowel rod(registration) in the middle of the table, but I'm concerned about it affecting my alignment/registration. I think I might superglue some washers on the print side of my screen, but the only concern would be the next time I go to burn the screen, will the washers affect my off contact?

@zoomsday3999 4 года назад

They say u can use washers or tape quarters to the corners

@ericsimbulan7248 3 года назад

Where is the link can i have the drawing plan and dimension pls! Thanks!

@ShellyCreatesIt 3 года назад

It is in the description. Also, another user commented and shared this link: drive.google.com/file/d/1svIjeXDLm8PO-IrFzdY8innI5jGaexWR/view?usp=drivesdk