TWIN Cylinder 4 Stroke 8.6cc TEST - Dyno/ MAX rpm/ Road test! 

this is the channel i get the most excited for.

This would be a great setup for oval racing! It seems so perfectly balanced.

I love the sound of that little motor. The crackle, and the quick revs really makes it sound good. Thanks for sharing the video post and best of luck 🍀to you and your family 👍🏻

Absolutely insane on how precise and pristine your work is!! Love it!!

Nice improvement over the prototype, it would be interesting to to disassemble both and see what else has changed.

Awesome! Cannot wait to get mine

Absolutely awesome as usual! The finished layout is a thing of beauty!

When are they going to make a OHC I6 engine tho? (Preferably DOHC) That would be the holy grail!😌🙏🏾

This is just so awesome! I've been watching your vids for the past few years and you really have refined your technical skill and your video styling too. Great content!

Guys! The engine is actually is SOHC, as the second pulley is there for looks. I receive increasing number of comments about this, and I wanted to address it. Trust me, I know what I'm dealing with 😉 Also if you're interested in the engine, here it is: NR-200 Engine ➞ bit.ly/3ylXSGU Use code: jq90 for 10% discount.

I love the sound that thing makes! The sound when you turned off those splines was also satisfying!

Love following these builds you have going! Thanks for sharing, sir.

I thoroughly enjoy this channel. The modifications you do are awesome always waiting to see what you are going to do next. 😀❤👍🇨🇦

This one sounds sooo good. These are so cool. And what you do is amazing.

Looks good. Keep up the good work! Can't wait to see what you create next.

So much gets packed into a 12 minute video. Thanks for sharing.

Reminds me of the Saito powered 4Tec I built years ago. Gotta love the sound of 4 stroke at high rpm.

Big difference. Always excited to see when you post.

Actually sounds badass, despite being tiny

Awesome man. I have literally daydreamed about a real tiny motor in an RC car exactly like this since I was a teenager, this hits me in the heart. (=

Always impressed in Every upload !! Nice/clean set-up 👍😎

such layout would have blown my 12 year old rc car loving mind in the 80s , and even for the 2020s is f ...n amazing, great work

Love your videos! I run a small lathe too and think I have a worthwhile tip for you. Try the honed carbide inserts marketed as "for aluminum". They lower the load on your machine and produce outstanding surface finish. They cut steel just fine (they are still carbide after all). The honed sharp cutting edge also lets them take the really fine cuts for those times when you need to remove a half thou to put a part on size.

The attention to detail is so satisfying.

That looks like so much fun! Awesome work

I never cease to be amazed at all the different skills this guy has.

Nice! Some rc specific things to consider Stiffer springs Thicker front diff fluid Stronger/faster servo Gyro on steering for filming purposes, makes it easier to drive and film at same time Love to see the updates!

I could watch your videos all day! It would be amazing to come and observe you work

Great little engine. It sounds and Revs so well !!!

Also, I can't say enough about your fabrication skills. You are definitely a God in the RC game. I was just talking about my old Traxxas E-Maxx (yeah, I know, ewww...electric motors), but it had dual 12 turn Titan 550 brushless motors, a full RPM steel chassis, RPM unbreakable chassis arms, steel driveshafts with a steel center section and spools in both diffs, matched 7 cell Li-Po battery packs, and steel counter gears. It also had aftermarket shocks and springs with 100 weight oil and aftermarket wheels with the soft knotty tires and MAN did that thing move. I put all new Tamiya servos on it and it would go anywhere. I also had an all aluminum linked rock crawler that was so much fun to play with. I did have a few nitro cars as well, but back in those days it was big money to get a controller and receiver that was strong enough for me to go fast and still have control at further distances. I'm sure RC technology has come a long way since then, but I had close to $2000 into my E-Maxx. When I moved my cousin sold mine without telling me and I was just screwed.

Love your channel bro, your things u make just get better and better. 💯💯💯🔥🔥🔥🔥 it sounds different aswell and it sounds mean as whn u come off the throttle and its slowing down sounds well goods

Impressive work brotha. Actually sounds pretty good too. Wasnt expecting that. I was expecting the typical nitro angry bees sound.

12:40 your own road tests even show this thing to be way more powerful than the dyno claims it is. That dyno needs a complete redesign.

I love this channel so much. Keep em coming

I feel I should be paying you for the therapy this gives me. Thank you! 👍

That’s freaken awesome, I need one now

I have actually watched every single video on this channel and I’m proud of it

What a great way to start my Sunday!

The king has returned!

The 1/4"-28 thread on the crank is a common standard on 2 stroke nitro model engines. This looks a lot like the "OS" style crank output standard used on smaller nitro engines as opposed to the longer more common "SG" style used on most .21 cubic inch (3.5cc) and larger engines. I guess they tried making it more compatible for off the shelf clutches. The thread on most nitro glowplugs is 1/4"-28 as well.

Subscribed Johnny, just discovered your channel, I love it. Keep up the great content.

I know a bloke who would absolutely love that. I'm sending him the video now. Big Alfa Romeo fan

Φίλε μπράβο εισαι πολυ οργανωμένος Σε παραδέχομαι!!!!

That's some great improvement over the beta!!! Great video!! Can't wait for more!!! Maybe we could get a Full Toyan engine comparison video sometime??

Its unreal how good this motor have Been improved

Awesome people, really smart. You impressed me. Makes me go crazy with every clip. Thank you very much for a great video to watch and enjoy. FC from Thailand 🙏🏻🇹🇭🖤🤘🏿

Wow, just wow 🤩. Great video!!

I did not know that you could face a square piece, thank you very much for your contribution!

you're a beast, keep it comin.

You are incredible what you do is just great🤩I watch every episode and I just think it's cool what you're doing👍✌️

What a beautiful mini machine!

Man check out the detail on this thing! This is sick dude 😏👍✨

I love how it can do donuts and be grippy at the same time.

I love and watch everything you put out well done as always but im waiting on that holy grail 3 rotor build thats going to brake the internet lol 😉🤔😙

Amazing skill and craftsmanship as always!!

that little engine sounds beautiful

11:01 Is that a small microphone cover as an air filter? I love it.

I was watching one of your videos when I got the notification for this one

What a gorgeous sound!

That’s really impressive 👏🏼

Love that watercooling tank

This is the car with the best sound . And it looks so amazing

It looks like the exhaust is boosting it 😎

love the alfa 155 body, good work JQ!

Added a suction fan above the radiator to help cool air to leave more

Love your work 🇿🇦🇿🇦🇿🇦👌

I like how you made a cool fast rc with it and not a slow crawler

Amazing work!

Thats a rare chassis you put that motor in. Oh love your work btw❤️

Yay ! Johnny's Back Again ! ! !

This things sounds like a tiny ducati, I love it

That’s awesome presentation 👍

Gotta love it when the engine screams!

Great!! Have also enjoyed & appreciated you vids ; ) Looking for to the day when I've developed my nano plasma ion drone for a quarter mile. Have fun, stay safe & take care ; )

Love the front of the engine reminds me of the legendary 2jz

Sick as FRIG bro 👍 makes me wanna build one

Very good I love videos like this I have the mechanical know how but unfortunately I couldn’t work a PC or CAD for love nor money well done

With those temps and that performance, you definitely can lean it out more and it will clear up significantly

This is already high level of proficiency and technicality. I really salute you JohnnyQ90! What I can do only is for cardboard toys. LOL!!!

A self cooling effect for the intake is amazing for power

Happy new year Johnny

Love the Alfa DTM shell

That is so sick bro 🔥👍✌️

An rc motorcycle with this would be super cool

Esse canal é muito bom 🇧🇷

Wow. If they put 2 of those in a v4 it would totally sound like my Aprilia!

Superb work my friend

Awesome video 👏

There it is!

Pretty cool setup. I love the mini radiator. I don’t see the desire to have this though when you can get off the shelf RTR that run 60+ mph for less than the cost of the engine in this video.

Love, Love, Love !!

amo assistir seus vídeos são tops!!!👏👏👏👍

Cool. The Stirlingkit twins seem very nice, and the NR200 more mature than the previous TOYAN FS-L200. Seem reliable compared to the TOYAN FS-L400 (4 cylinder) giving crankshaft breakages. Now hope they develop the FS L400 to the same standards as this little cute twin.

damm, this thing actually sounds good ngl.

That motorb sounds so good

Amazing 👏 RC has come such a long way in the last decade with the onset of CNC and 3D printing, it's like anything we can imagine almost we can make or find out there nowadays. I have 1/4 and 1/5th scale both RC cars and boats and originally getting into the 1/4 scale stuff was very very difficult and extremely expensive because if you couldn't make it yourself or have the tools or knowhow you paid dearly for the parts and pieces you needed. Now just hit Ebay and it's like a Walmart for anything RC size except still 1/4 scale cars. But I only have one 1/4 scale lol so it's fine by me, 1/5th is the best way to go with large gas or electric if that's your thing? But that's very impressive that little 4 cylinder is capable of turning those rpm's and not blowing up! It's really right up there with my high performance gasoline engines, just tiny sized though. So cool to actually see someone mounting one In a actual car finally. Anything I've seen so far is people just make static displays so they can run them..... but very good and it performs better than I thought it would as well for its weight!

Beautiful engine!!

That engine is BOSS! Also I’ve really enjoyed watching your self made RC car build videos. Thanks for sharing them. WOW the rpm is massive. Are you going to modify it with a turbo or supercharger?

Can't wait for the supercharger vids

Your skill set is unfathomable.