People this is not a good example of how to install one of these. You didn't wait until the glue dried he touched the surface with his fingers of not only the rubber on the front but the ground area on the tire he pulled too hard on the clogged in didn't drill with a carbide prepare the and remove the damaged section of Rusty bands in the tire
Perfect example of how NOT to repair a tyre. So many mistakes! This repair will fail. Guaranteed. 1. Use spiral tool instead of insert tool to check injury direction. 2. Use carbide cutter instead of insert tool to prepare injury. 3. Rotate in one direction only while going in and coming out. 4. DO NOT TOUCH HREY GUM ON PATCH WITH HAND. 5. Use 36 grit rasp to get RMA 3 level buffing. Anything more will damage the tyre. 6. Clean buffed area with a cleaner (rub clean / rub o mastic etc) before applying CvF
Yes. You are absolutely correct. This guy is totally wrong. We are doing this for many years. I am a distributor for this OMNI products. He is using CVF on the gray cushion that is also very wrong.
😂😂😂 solution woh pach ka leg pe leganeka thuranth pach hole se bahar nikalnekka thab solution work as a lubricant. Patch pe solution marke thoda time dry honekko deneke bath yesa karna thab raheha 😁 Me yehi kam kartha hum 295/80-22.5 tubeless truck tyre
How long life in mushroom punctuer? Punctuer hole size is approximately 10mm bolt size. Mushroom punctuer carrying. Pls reply my sumo Tyre is affecting bolt. Badge puncture or mushroom type which one is best life time