Two .60 cal Ball... The Multi-ball Round Enigma gets SOLVED! 

You are the Matthew 4:19 of shotgun reloading. I do mean that with the utmost respect as I have just ordered my very basic set up and components I happened to luck into some primed hulls but I am trying my hand at this because of your videos. Cheer's brother and thank you.

using a tough shot cup/wad with a .5 inch paper wad in it & spherical buffer around the 60 cal balls = 6 inch group at 55 yards

This setup seems very similar to the Dixie slugs ‘Tri-ball” load. We’ve used those for years with good results.

I really appreciate this information! I also appreciate your ability to control yourself from using bad language, can't always say that for myself. Take care!

Thanks for this one Wade! You just seem to make things work when some others would have already given up. I appreciate what you do sir. God bless!

I've had one of those molds for several years and I was gonna ask you about loading those , but you beat me to it.

If you order that finish tool make sure you get the shaft it mounts on for your drillpress!

I am hooked on quality video content, information is knowledge! This experience is second to none,and is willing to teach ! I don't know about y'all but ,I enjoy watching 🦌 hunting,but I love the science of firearms! Thanks Professor! Ha Ha!

Great stuff again Wade !!!

Love this video. Would like to see you take a deer with this load

Got me interested in reloading my own buckshot, great info wade.

I've heard you talk before about the bright lights being hot, I've had the same problem but found a solution. Get some exterior LED lights and set them up to bounce the light off the wall or ceiling, this softens the light and cuts down shadows plus the LED lights run a lot cooler. Hope it helps.

Thanks, great video and good tip on the bingo cards!- Ryan

Wade . I really like these rounds. They are going to be sure enough effective .

Good video BRO , Love the 12 gauge shot gun!👍 🇺🇸

Got to take that one to the woods I want to see it in action as always I learned something god bless

Excellent , thank you from 🇬🇧

Thank you Wade

Yeah I Get Horrible Preformance Outta 2 .562 Balls Unbuffered.. Like They Are Wedged Together. To Wedge Apart When Leaving Barrel. Hoping You Have Something I Can Use. But Honestly.. Ya Always Do.. Casting Lee 7/8ths Slugs, Svarog Italian Slugs And Svarog .66 Round Balls Today.

Thanks Wade, now you got me thinking how to make that in a 2 3/4 8-)

Thanks again to BRO I thank you all for the videos you do. Good men who teach you how to be an outdoors man or woman. God bless and keep safe the men and families of BRO.

Love your buckshot and Multi ball rounds videos.

Muzzle loader short starter works well

Another great video. Thanks Wade

Great video. Thanks for sharing. I'm just starting with shotguns, could you do a shotgun 101 from type of ammunition, types of shotguns etc....

Amazing results thanks for sharing 👍👍

Thank you. Your videos answer all my God bless . Thanks for all the great content.

Great video as always!

Double round ball is a tricky load to get right. I'm open to any suggestions. Thank you for doing this video Wade, I'm all ears 👂. Fire away! 💥👍 (Dang, looks like you got it figured out! Very impressed, thanks again!)

hey Wade, I got some cheap or as to say the cheapest 12 ga 7 1/2 shot I could get 1 oz to 1 1/8 shot, dumped out the shot, put in a spacer then put in a 20 ga clay buster wad cut so to fit inside the spacer inside the 12 ga wad, then, inside the 20 ga wad, placed a .535 235 grain round ball, crimped with a 600 MEC JR then test fired thru a 18 and 1/2 inch cut down smooth bore, single barrel (with no bead sight on the barrel) at 30 feet, standing free handed no shooting rest, and low and behold, 4 shots in a 6 inch pattern, and they seem to hit very hard, a side note this is a in house gun only, only closer then the 30 feet test fired distance, and yest I wanted a ball that would fit the 12 ga bore but stuff cost to much and now is hard to get, so, this will work, thanks for the videos you put up

Great video. Keep it up BRO!

Great video, looks alittle safer than 2 69 balls lol

-And immediately they left their nets and followed him- love the hat

Dang. That is awesome

Its almost like using buffer as a sabot

I’ve got some .540” round ball, wondering if a 3 ball load would work (3 is right at 1.5 oz). I’ve seen 3 buck loads before but don’t remember them being great. I think property supporting them so they don’t jam each other sideways when the charge goes off is key. Thinking 2 washers / donuts between them to keep everything mostly straight as it goes down the bore might be the ticket. I’ll have to figure something out, they fit pretty well in a 20 gauge wad so maybe I can use one inside a 12 gauge wad, almost seems better to find something that’ll go straight from .700” down to .550” to hold them instead of a bunch of extra pieces.

Excellent

Good Stuff right there 👍... 🇺🇸

Thanks Wade, excellent informative video I'm in New Zealand and at present 20 gauge components are scarce I will see if an importer can get me some Federal S1 wads I have some old no name 20 gauge wads but the have very short petals and are not very good with normal shot loads Keep up the good work and very best wishes to you and your family Pete

Great video b.r.o. Wade rush!!! One load in particular that interests me is .440 buckshot in 12ga 2 3/4" & 3". This video was very helpful.

Good job keep it up those videos

Havn't tried this one, A card between balls might cushion them from each other, But might deflet the last ball moving away as the exit. Been using Blue Dot for 1 1/2 Oz heavy mag loads since the 1980's. My 357 also

Great video!

Mr Wade Rush. I see where War Wolf puts a over shot card between the two projectiles. I saw this on Taofledermaus. Accuracy was good with smooth bore Great with rifled barrel. Any thoughts?

I have made some 60 cal. double ball with clbc wads in 2.75 fio. hull. The height is just right to roll crimp.

Wade this is not on topic but when watching this video i noticed you had a new piece of equipment on your loading bench.when did you replace your old Mec sizer with the Mec Supersizer. Great video. I like shooting slugs and buckshot out of a Remington 1100. Have a great deer hunting season. Mike

Love the show

Have you do posted a .50 cal in 20 ga video?

Wade can I use 3" Fiocchi mag. primed hulls with load?

Wade what if split one of the fiber wads in half and used part in-between the balls to help with deforming .

Now I wonder about putting buffer in first with 1/4 fiber, then 1 ball then buffer and 1/4 fiber, ball and buffer. Or, buffer, ball, 1/2 fiber wad, buffer, ball, buffer. I may be rolling that in my mind tonight.

Could I buy a box of this load . I only have a public river bed I can hunt. And I can only use shot to hunt no slugs or archery is allowed. I would be willing to pay quite a bit for a box of these. I have never loaded ammo before and don’t have the equipment to try it myself this year

Why do you not use enough buffer to be tight under the overshot card?

What shotgun do you like best?

Can you use a paper shot card?

What's everyone opinion on 16ga on deer and what buckshot and rifled slugs are good?

The mad scientist great video bodyguard

What choke were you using Wade? As always good vid, may God keep you and yours safe..

Wade, do you have any other powder data for these? I heard IMR blue is discontinued.

Bubba if you cant get ahold of buffer, can you think of anything safe to use instead ?

Ok maybe you can suggest the right size ? On a 60 cal what mold is that ? I’m not seeing it on Marty’s molds or maybe you are using a different mold . Where do I get one of them thanks for your help .

Totally off topic but I’m just starting to get in to shotgun reloading. Where do find all the load data for steel shot.?

👍🏻

Wade is that a new gun? Or did you wrapt the stocks on your Stoeger?

Mr Wade, have ever loaded a lee 1 oz slug with 00 buck?

Those .60 cal double ball rounds, Hog killer and booger repellant. Lol

.30 grns of longshot work ..

Could I substitute a Fiocchi hull for the Cheddite?

Do you have a suggested powder charge with Longshot? My Blue Dot is getting low

🙂

Wade I heard that palmetto state got remington ammunition part of Remington sell off after bankruptcy.

You need a high speed (slow motion) camera. I would bet you that if you could see what was going on with your shot (how they leave the wad / how the wad flys) you would have a far better understanding of what/why things pattern like they do. The whole a picture is worth a 1,000 words, storyline. How long does the shot stay in the wad out of the barrel? Does the wad opening pull some of the pellets off target? Is the wad spinning? Do the smoother pellets make a difference? Would dimpled pellets work better (golf ball)? Does pellet stacking matter? What if the shell was made so that the wad was the size of the barrel? Would it fly straighter? Does the wad wobble as it goes down the barrel? Does it always come up flying perfectly straight or does it come out flying cockeyed sometimes?

Are those lead balls ?

I may have bought 800hulls from Bill haha

Why not add a third ball instead of the wad filler

Double .69 ball in this video? Just leaving work I’ll watch when I get home

Acts 2:38 is the Bible plan of salvation. Ignore this scripture and you will be lost forever.

Can you fellows not use rifles slugs. We have a controlled deer hunt were shotguns are a must. Most guys shoot old fashioned slugs or sabot slugs in rifles barrels. I never see you guys use any slugs.

Why do you try so hard to get people to buy from bp?

This 3 year old video just came across my RU-vid , it answered questions I’ve been wondering about using long shot and blue dot. Thanks again Wade. dmcabee