Two stroke bike bogging ? Let's inspect the carburetor 

another way to check if float if sitting properly is to line up the seem of the float to the edge of the carburetor where the bowl attaches to the carb

Keep them coming bud, digging the content

My Guy, 19mm on float no more cutting out top end appreciate you and this video 👌 🙌 💪 running 120 main jet 48 pilot on b2 full powered model get 85mph top end and prob enjoy this bike more than my crm250.. Shout out to the 2 stroke crew, they don't want this smoke 😤😂

Awesome video, learnt something new. Not sure if I'd take a carb apart yet though😂

Did it bogg after cleaning the carb?

My aprilia rs 125 2001 boggs all way to 8k then is fine when the band kicks in. Could this also be the float. I have replaced a damaged idle emulsion tube and cleaned carb but didn't know about float

What's the music intro?

If a dirtbike runs can it still need cleaning if it boggs an idle high in neutral

How's it bru. Which 2 stroke oil which you recommend running in a yamaha blaster 2 stroke?

Just one question. My scooter 50cc 2t just bogs when the engine is cold when its get warm like 1 minut runing its fine. Whats the basic think to cause that? And i didnt meniton its starts good its idling godd but like i said when the engine is cold its when you give a litl throtle and runing 1 minuts its not boging.

kx100 bogs when i get past about 75% throttle. it sucks

My bike bogs when it hits the high Rpms but I got a brand new carb and it still does do you think a bad spark plug could cause it

Good info, where did you get the specs from?

Yes 😁

Hey bro. Whats the cause of bogging? When full throtle loud bogging noise

I have a 50cc 2T and it cuts out when the engine gets warm, do you know what could fix it?

What bikes this for bro my rm85 has the same carb and I’m having issues

Hey man, idk if you'll reply on such an old vid but guess it's worth a try. I've got an old 50cc 2 stroke (suzuki fz50) and it runs perfect on straights and only struggles a little up hill but once its warm it bogs and cuts out every time I stop like at traffic lights and then when it starts again it sounds really strange for a couple seconds until something seems to click and it runs fine again. I'm getting good spark and compression, any ideas?

Hey man Im just wondering if you can help me solve this issue I’ve been having on my 50cc motorized bicycle: Bike starts but will not stay running for more than a minute at idle, and will bog down and die out even quicker than that if I try to ride it. I took off the carburetor, and cleaned it. I replaced the spark plug, CDI, magneto, fuel tank, throttle cable and killswitch assembly. (Not at the same time, one by one) The bike seemed to be great for about 2 minutes and then started experiencing the exact same problems. Notable occurrences: -the bike sat for the whole winter in the shed which is not climate controlled. -when I pulled it out of the shed, I decided to try my luck at riding it as is (bad gas and all), and to my surprise it ran pretty decently. Only after about 15 minutes of riding did the bike start experiencing these issues. -the gaskets are in rough shape, especially the one on the crank case (magneto case) -when I leave the fuel valve on for about 30 seconds and prime the bike, it starts right up and wants to go, but will die 30 seconds later every time without fail. The last point leads me to believe the issue has something to do with fuel but what the hell could it be? I’m grasping at straws here as you can tell from me commenting on a random persons video. Please help 😂

What kinda spray you use to Kline the carb?

Takde kew warna hitam... black carbon steel kew... skru pilot..

I have a 50 cc ped and it goes lovely on straights but bogs out up hills ?

I got my first 2 stroke yz125 and it keeps bogging out in second gear so frustrating 🙄🙄

Hi my honda cr85 is sputtering on full gas i don't know what to do.Please help thanks

I have a 66cc motorized bike and sometimes when I press the gas it bogs but when I pull the clutch it starts revving like crazy. I have checked for air leaks and cleaned the carb but I still have this issue... Anyone knows what could be the issue?

How do you fix bogging that's only in the low end and it idles okay mid-range and top end are okay

The way you rev at end of the video, It's not working for me, there I'm getting bogs and engine cuts off. I changed needle position and float level, no use, only bogs and cries.