Тёмный
No video :(

Typical Reinforcement in a Concrete Beam 

Structures Explained
Подписаться 35 тыс.
Просмотров 135 тыс.
50% 1

Hi guys, this is Structures Explained, and in this video we are going to discuss about typical reinforcement detail in a concrete beam.
Reinforcement are essential part of a concrete beam. It resists tension forces, increase the compression capacity, enhance ductility and reduce long-term deflections in the concrete.
Additionally, reinforcement prevent cracking of concrete due to shear stresses, shrinkage and temperature stresses.
First we will see the reinforcement distribution in a single span beam and later we will have a look at multi span or continuous beams.
Types to reinforcement covered in this video are: Bottom bars, Top bars, Side bars and Stirrups.
More such videos on reinforcement will follow on this channel, so do subscribe and hit the bell icon to get notified every time we upload a new video. Also check out other related uploads on the channel.
Shear: • What is Shear Force / ...
Torsion: • What is Torsion?
FOLLOW US ON
Facebook 👇
/ structuresexplained
Instagram 👇
/ structures_explained
LinkedIn 👇
/ structuresexplained

Опубликовано:

 

24 апр 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 44   
@StructuresExplained
@StructuresExplained 3 года назад
Creating videos takes lot of time and effort. If you want to support such videos and keep the channel sustainable, please consider below options: 👉 Join Channel Membership: ru-vid.comjoin 👉 Support directly via PayPal: www.paypal.me/StructuresExplained 👉 Applaud (if available in your region)
@kennyomega8937
@kennyomega8937 Год назад
Bro which software you used to make this video
@jayantkhare109
@jayantkhare109 2 года назад
Thank You, Saw all your videos on columns, beams and stairs. Excellent explanation with lucid video. Brief and concise. Its a great help for non engineers to understand construction. A must see for all those who are planning to start constructing their houses. once again ,Thanks and great job.
@rustycarpenter1219
@rustycarpenter1219 Месяц назад
Great video
@rameshbs5595
@rameshbs5595 Год назад
Very nice informative
@civilengineeringfromgoldme3074
Well explanation
@adilmj
@adilmj 3 года назад
Easy abs clear explanation
@JulianMakes
@JulianMakes Год назад
Very nice
@murxart8323
@murxart8323 2 года назад
Really good explanation 😃
@TheLazyGuyWay
@TheLazyGuyWay 2 года назад
Excellent explanation thank you for sharing
@user-vt1ii1km4o
@user-vt1ii1km4o 2 месяца назад
wonderfull Sir
@mahendradas1598
@mahendradas1598 Год назад
Excellent explanation but, should be more details about top bars or Crank bar for continuous beam
@Waynechester_
@Waynechester_ 3 года назад
Earned a sub, thanks for this!
@romelynbonghanoy900
@romelynbonghanoy900 7 месяцев назад
So amazing
@deepalin3785
@deepalin3785 2 года назад
I liked the Video
@civilengineerchannel1027
@civilengineerchannel1027 2 года назад
Good job!
@nitishrai9935
@nitishrai9935 3 года назад
Thanks for video
@StructuresExplained
@StructuresExplained 3 года назад
You are welcome!
@liboy9844
@liboy9844 Год назад
Will the beam be more rigid and resistant to sagging if stirrups are arranged diagonally to form triangles as done with steel trusses?
@robertweekley5926
@robertweekley5926 Год назад
Also, placing Rebar bent in a soft "z" shape, as in 1/3 length Flat, 1/3 Bent 30° to 45°, and last 1/3 Flat (Horizontal), to both form a Truss like connection, and tie to upper and lower rebar together?
@WWYG316
@WWYG316 Год назад
How do they workout the bar thickness?
@oneperspective8601
@oneperspective8601 2 года назад
Excellent.
@dennisromero5618
@dennisromero5618 2 года назад
Nice vids very informative, sir may i ask what is the minimum or standard height of tie-beam from the footing foundation? many thanks for the feedback..
@sanguine6071
@sanguine6071 4 года назад
It's a nice video but I would like to correct you here that...You said when depth is more than 900 mm than we provide side face reinforcement but as per IS CODE : 456-2000, CLAUSE - 26.5.1.3 ,Pg no. - 47...It is clearly mentioned that if depth > 750 mm then we have to provide it and the spacing between them should not be more than 300 mm.
@StructuresExplained
@StructuresExplained 4 года назад
Hi Bhanu, thanks for your comment. Quoting from the video "These reinforcements are generally provided to deep beams which have depth higher than 900 mm or 36 inches. This value of depth differs from code to code." it is mentioned that the depth value differs from code to code. The value of 900mm is provided in ACI318 and you correctly pointed out that IS code mentions depth as 750mm.
@sanguine6071
@sanguine6071 4 года назад
@@StructuresExplained thanx for the information and reply
@CivilAbhyaas
@CivilAbhyaas 3 года назад
Beautiful conversation... I would like to add something. In case of torsion in beams as per IS:456:2000, THIS DEPTH IS 450 MM ONLY.
@CivilAbhyaas
@CivilAbhyaas 3 года назад
750 mm is for flexure only....
@arjunabernard8192
@arjunabernard8192 2 года назад
Thank you for the video. Do the stirrups need to extend all the way to the lower reinforcements or can they terminate to another reinforcement just above them?
@ashishvardekar1746
@ashishvardekar1746 4 года назад
Good going sir,,👍
@civilsitework9058
@civilsitework9058 3 года назад
Subscribe for more videos ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NQhk0pviRA4.html
@masterconstruction1989
@masterconstruction1989 4 месяца назад
good luck
@user-bb1hj8xv4q
@user-bb1hj8xv4q 4 года назад
Go on sir wonderful explanation
@civilsitework9058
@civilsitework9058 3 года назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NQhk0pviRA4.html
@user-zq9wc7cy8p
@user-zq9wc7cy8p 9 месяцев назад
Hi. with what software do you make these videos? Thanks in advance.
@ruffamaerobles3615
@ruffamaerobles3615 3 года назад
wow!!
@PBS-nm1uu
@PBS-nm1uu Год назад
what is the spacing for the stirrups??
@internalstory
@internalstory 2 года назад
Make a video about reinforcement of cantilever beam.
@Innotutorial
@Innotutorial 3 года назад
Good video sir. Please what software are you using to create these video?
@Layput
@Layput 3 года назад
He said Blender.
@Innotutorial
@Innotutorial 3 года назад
@@Layput ok thanks
@lobsangyolmoo5162
@lobsangyolmoo5162 Месяц назад
where is bent up bar ????
@rameshbs5595
@rameshbs5595 Год назад
Very nice informative
Далее
The actual reason for using stirrups explained
9:01
Просмотров 777 тыс.
Concrete Staircase Explained
4:04
Просмотров 71 тыс.
Why Concrete Needs Reinforcement
8:11
Просмотров 11 млн
The Greenwich Meridian is in the wrong place
25:07
Просмотров 707 тыс.
The Critical Weakness of the I-Beam
6:14
Просмотров 1,3 млн