UCS Millennium Falcon Vertical Stand Build and Install Tutorial!! (Efferman Vertical Stand MOC)

Подписаться 24 тыс.

Просмотров 39 тыс.

50% 1

This Video Shows Everything there is to do with the Efferman's MOC Vertical Stand for the LEGO UCS Millennium Falcon set 75192. I show you how I received the Stand and take you through the experience of opening the package and getting my reaction on how it came.
I will show how the pieces to build the stand were packaged as well as Knelling them out to show what kind of pieces are used in this MOC to build the Vertical Stand.
I attached a Speed build to the video and out it to some music, but if you wish to skip past the build it ends at 13:22.
After I assemble the stand I try different things to get the Millennium Falcon mounted on the stand without having it break. After trying a few things I show how I was able to mount the model and what kind of damage was done to it during the process of the install. Hopefully this can help you avoid making the mistakes I did and prevent any damage when you are mounting yours!! After getting the Millennium Flacon LEGO set 75192 mounted of the MOC Efferman Vertical Stand I will show you close up how it connects to the model and how sturdy it is while it is on it.
I will take you through the final step which is putting my Holy Grail of a LEGO set on display in my LEGO room!!
If you enjoy this video please give it a thumbs up and Subscribe to the channel to show your support. Make sure to hit the bell notification to stay up to date on my future videos.
Check of LEGOFanUK on RU-vid
/ @boombrickz
Follow me on Instagram @AandAHobbies
@Cory_lurette
Here is a Link for the Stand from ReBrickable
rebrickable.com/mocs/MOC-1021...
I bought my Stand off a website called Etsy for $73 Canadian dollars including shipping
www.etsy.com/ca?...
#LEGO #StarWars #UCSMillenniumFalcon

Развлечения

Опубликовано:

9 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@Double-R-Nothing 2 года назад

I've watched car crash compilations less stressful than this. Mad props to you, man.

@Deathinflames 2 года назад

Thank the stars for this video. I had to disassemble this wretched thing three times before I figured out where I kept going wrong, and then I totally wrecked the top of my Falcon in the mounting process. Easily the worst building experience I've ever had, but now that it's repaired and attached.....it is a mighty fine stand.

@marknasia5293 11 месяцев назад

i’ve tried everywhere the pdf instructions, thank you for posting this, playing you scanning over the instructions at .25 speed i was able to get my stand built. thank you so much

@letmellego992 2 года назад

I’m so glad for your video. I have just finished assembling my Millennium Falcon and most of it fell apart as well. I’m still trying to reassemble the bids that fell off before trying the stand again, but at least you have given me a good idea on how to achieve this on my own. So thanks. I also struggled with the instructions, but as I’m in the Uk I had a paper version of which I had thought was good, but it’s really bad, as you highlighted. I persevered and now I’m eager to see if I can get my falcon on it without any more damage. Unfortunately, I’m waiting on spare parts from Lego as some went missing. There should be a damage warning on the stand instructions or at least instructions on how to get it on without damaging our hard work. 😬

@John-of5sh 3 года назад

OMG what a MAJOR PITA!!!! I did figure out a tip that helped me flip the Falcon without a bunch of pieces falling off. I ordered 10 rolls of elastic bandage off eBay. Of course I punctured my thumbs and fingers with these little clips, but I was able to flip the whole ship upside down-by myself. Truth be told some pieces did fall off. I only used 6 rolls. Maybe had I used all 10... Anyway after gathering dust for a year setting on a table I now have the Falcon inside a huge plexi-case! Much easier to dust!! Anyone wanting to try the elastic bandages, the ones I ordered off eBay were 3" wide. You may want to try different widths. Or not, the 3" worked for me. A word of caution, they can get in the way of attaching the stand, make sure none are between the stand and hull, the stand has zero wiggle room. Good Luck!!! And a BIG Thank you to A & A Hobbies for showing me the way to attach the stand!!!!

@joekuhfuss2454 Год назад

Thanks for the video, knowing how it attaches mite make it easier, I've also added the Light My Bricks kit, deff worth a look, thanks again

@brickbinder6687 4 года назад

Very cool! I think this is what I’m gonna go for when my falcon arrives.

@AandAHobbies 4 года назад

Instructions are not very good

@brickbinder6687 4 года назад

@@AandAHobbies I'll give it a shot. I want one of those Wickedbrick stands but the shipping cost kills it for me.

@Efferman 3 года назад

@@AandAHobbies then i should i maybe do a new instruction.

@AandAHobbies 3 года назад

3fferman be better if it highlighted where to put the next pieces

@norialmeida 2 года назад

thank you I finish the base today and had a lot troubles to put the 2 pieces

@BoomBrickz 4 года назад

Awesome video mate, that looks like probably the scariest thing you can do with LEGO ever! So pleased you didn’t drop it! I also think you have genuine LEGO pieces as I don’t think technic has the logo on it 👍🏼 Looking forward to seeing a video on a room tour

@AandAHobbies 4 года назад

It was scary standing it up on its side, what a job that would be to put it all back together if it fell lol

@BoomBrickz 4 года назад

AandAHobbies 😂 I would probably just cry

@Efferman 3 года назад

@@AandAHobbies it is easier when it stand on the tips of the mandibles. But easiest at the step when the landing gear is put on.

@joeshmo3104 4 года назад

Looks Great I would love to do this!

@KBrickschannel 4 года назад

Great video!

@AandAHobbies 4 года назад

Thank you

@jordanranstead3016 3 года назад

The stand looks great! I ordered one for my falcon. Should come by Christmas. Hope I don't drop it!

@MyNickyMouse 3 года назад

im debating either doing this or buying the wicked brick stand. im just trying to figure out which is the better.

@andrewbouffard6118 9 месяцев назад

Awesome vid!! Here is what i did at step 700 ish I installed the stand and was able to finish it with stand on. Also you can slightly modify landing gear to put 2 back on. Chers

@mikeoleary1561 3 года назад

Very useful video thanks. Instructions are shocking as you said. I had to take a picture of most stages and zoom in they were so small and then nothing showing how to fit the falcon on to it! I would never have known to remove the landing gear 🤣

@AandAHobbies 3 года назад

I am very happy it helped you in some way, thanks for watching

@takeitonline5693 22 часа назад

Thanks this helped me alot, i notice better to put it on in a early stage

@BrickAdjuster 3 года назад

The Stand looks great. Pretty nervous when you were first trying to install it

@georgecook1374 3 года назад

thnx dude i am just building mine so a stand is in the near future nice to see how it hooks up to the UCS. To bad the instructions are so vague

@AandAHobbies 3 года назад

The designer has commented on this video about improving the instructions, he might have done that now

@andrewberriman4757 3 года назад

Mate just watched this and felt your pain as you installed the stand. This will be me today!!

@AandAHobbies 3 года назад

Good luck and just remember, it can be rebuilt……right?

@andrewberriman4757 3 года назад

I hope I don't get that far. Needing cat like reflexes👍

@wimdelsing1570 2 года назад

It was pure fear and horror, my fingers are to big. I (with the help of my wife) did it, part thanks to your video. She looks great!!! Thanks

@jpp0901 Год назад

This video was more nerve racking than a horror pic! Lol! Well done man😅

@barbaoki7569 2 года назад

I’d love to see how you set your lego room! For example the black shelving you have the millenium falcon on looks great. Where did you purchase that shelving?

@AandAHobbies 2 года назад

Ikea is where the shelving is from

@barbaoki7569 2 года назад

Thanks.

@GeordieShores 3 года назад

Great video , could you get some dimensions for me with it on the stand, I want to know if it will fit on a IKEA billy book case so only need to know width and depth height will be no problem as you can choose where the shelf’s go

@petrnovak288 3 года назад

For the next generation - the size with Falcon - width 83cm, height 55cm, depth 34cm. Also thanks for great video.

@marcin.drozdz 2 года назад

@@petrnovak288 this is what I was looking for. Thank you sir 🙂

@BrickMcBricksworth 3 года назад

Great Video bud! But that was scary early on in the mounting stage! It really is a two person job if you don't want to risk smashing it to bits...

@AandAHobbies 3 года назад

I have seen people flip it right upside down on a bed, that’s scary too

@BrickMcBricksworth 3 года назад

@@AandAHobbies Those people have no respect for the beauty they behold! 🤣🤣🤣

@peervanasten7100 Год назад

@@AandAHobbies Did that, im at bag 9 so it wasnt that hard, just hard to pick up again

@tigerkev2012 5 месяцев назад

nice work! could it be mounted the other way around so the cockpit is at the top & its facing to the left?

@AandAHobbies 5 месяцев назад

I have heard of people mounting it that way, I am not brave enough to try to switch it to check

@willbuckingham6783 3 года назад

At 9:30 (if you slow video down) you see those 3 points from the L piece side of the to the 5 beam dont align as you add the 7 beam, and you had to squeeze structure to align, i had same issue and i'm convinced something was misaligned elsewhere, but I'm guessing not from your vid.

@AandAHobbies 3 года назад

That is amazing that you caught that I will be checking as soon as I can!! Thank you

@willbuckingham6783 3 года назад

@@AandAHobbies I meant to imply I was hoping yours was right too, cuz i couldn't find an error in my following of the instructions, though I had made mistakes in other spots, so i wasn't sure if i trusted my self until i saw you had to do the same. And I only caught as I intentionally went to .25x speed to check.

@pablomilsztein6730 3 года назад

Hi, thanks for the explination! Do you know how to do so the pilot cabin will be on top?? I think that looks better that way.

@AandAHobbies 3 года назад

Not sure, depends on if the locking pins line up with it the other way around

@pablomilsztein6730 3 года назад

@@AandAHobbies Well, found anothe video, let me let you and others people know, if you want it in the top, the red parts need to be like in the picture, if you want the cabin on the bottom, you need to change them, 2 on the left amd 1 on the rigth. And the 4 grey part on the bottom, you need to take the off. I will try tomorrow to put my, hope i can do it haha.

@AandAHobbies 3 года назад

@@pablomilsztein6730 good to know it’s possible, good luck man, it was the most stressful thing I have done with lego

@pablomilsztein6730 3 года назад

@@AandAHobbies i know!! i try and a lot of parts felt of haha, i was angry, and then i saw on a video that is better to take thise part of first, put the falcon on the stand and then put them back 😄

@R_T_Ralph 3 года назад

Hi, I have this to hopefully do this weekend, and im already stressed about adding the stand. Do you recommend any tips on how to mount the falcon on the stand?

@AandAHobbies 3 года назад

Take all the panels off the top, rest it on the cockpit side of the escape hatch and take your time

@chrisroma4201 11 месяцев назад

Make it easier take too pamels off so you don’t have parts falling off .also I hit glue gun in a few spots cause panels were lifting off .rather sacrifice a few pieces than come home to find panels on ground smashed to pieces . if I was to do it again, I wouldn’t even use the stand and find a place I can put it where it’s standing on its feet

@R_T_Ralph 11 месяцев назад

@@chrisroma4201 Im getting a case for mine, as im sick of dropping things on it and loosing parts.

@leobaron4481 Год назад

Thanks for the video. My kit came without an instruction manual.

@user-cw2ch1st2f 6 месяцев назад

While I see your video is a few years old, I have recently purchased the Efferman stand and stuck on steps 20 and 21

@luthfianpramanda7110 3 года назад

im in progress building the millenium falcon, right now im finnishing the 8th. Can i install the efferman right now? or in which step u suggest me to install the stand? or should i finnish the build first?

@AandAHobbies 3 года назад

Think you should finish the build first

@luthfianpramanda7110 3 года назад

Thanku, alright then 👍👍

@122bossgg3 2 года назад

CANADA GANG!!!

@joleenuntenstrich13 2 месяца назад

ich hab das ding auch gebaut und ich sag euch beim zusammenbauen der halterung braucht man mit lego ein bisschen erfahrung weil die anleitung ein paar fehler hat. beim anbringen an den falken ich sach euch ich hab das zu 4. gemacht und hab dabei fast die nerven verlohren ein paar teile si d abgefallen irgentwo innen und ich weiß nicht woher. Das di g hat mir den letzten nerv geraubt. aber es steht ist zu 99% heile und ich bin happy

@cenbj07 3 года назад

I just bought this stand and I have my Falcon "unbuilt". I want to build an acrylic case for display. Could someone tell me the dimensions I'd have to use? I'm asking because I'm guessing it'd be taller than without the stand and definitely the depht will change. There is a lot of dust on my house and I want to build the acrylic case before I build the set. Please someone help with this info

@AandAHobbies 3 года назад

22” high by 14” deep by the length of the ship long on the stand my friend

@cenbj07 3 года назад

@@AandAHobbies awesome, thanks for the quick response

@ps5754 3 года назад

Had any problems with the 1x2 plates and the red pins? I had to remove 2 plates and 1 pin didn't fully attach

@AandAHobbies 3 года назад

No but I did break one red pin trying to mount it

@AandAHobbies 3 года назад

@P S if you have Instagram dm me on there and I can probably help you get things sorted

@ps5754 3 года назад

@@AandAHobbies Appreciate your help! But I already displayed it on a coffee table. I was just curios if anyone had the same problems.

@diabbilly8101 2 года назад

The round dish is back on for episode 9 btw look closer

@GeordieShores 3 года назад

great video, will it fit on a ikea billy bookcase?

@AandAHobbies 3 года назад

Yes it will, Bricksie displays his on a billy shelf

@GeordieShores 3 года назад

@@AandAHobbies yeah has the deeper ones i saw, i was hoping to put it on the display and then on the standard billy case

@AandAHobbies 3 года назад

On the vertical stand it fits on a 12” wide shelf, that’s what mine are

@johnpaulotan1769 2 года назад

@@AandAHobbies can i see how you mount yours?

@Arfwid 2 года назад

The assembly at 8:30 has been giving me a hard time... Is it supposed to be tight, almost strained when put together?

@AandAHobbies 2 года назад

No it is not supposed to be strained, you may have something a hole or two off

@Arfwid 2 года назад

@@AandAHobbies thank you. I got to go back and re-check everything... well, 's all part of the experience :)

@AandAHobbies 2 года назад

The instructions are terrible

@Arfwid 2 года назад

@@AandAHobbies I'm 99% sure I found the error, the cross beam that goes through the "7-2x9-5" combo with a hole. In the instryctions it looks like it shouldn't be connected to the main legs via the long-pins. It just rests against them when assembled. Whick is "logical" given that the part is always in compression. And the pictures clearly shows that the blue middle part of the pin is exposed. I thought it was wierd, but hey, not insane. So that was probably the issue. I say probably cuz I'm at work and haven't tested it yet. Tonight I finish :)

@mattyess5655 3 года назад

Anyone know how to make this work for 10179?

@AandAHobbies 3 года назад

I am not sure if it has the same technic pin connection points, would love to get that set at some point

@Kimvanloocke 14 дней назад

Yes some manuals are horrible pdf or like the lego builder ap that Causes my iphone12 to get locked constantly then there is the just build the mirror version would solve a bit and sometimes building it is easyer than the hoops they force you to do it their way while you and i say hey this can be done better maybe we are just more experianced builders?

@goodimvu6854 2 года назад

When I get that you see as million falcon I’m gonna get the stand as well but the million falcon is going to be so hard to build so I might need my sisters and my dad to help me build it and don’t forget it I’m also going to be building it because if it’s my Lego set I’m definitely going to be building it and when I build a stand I’m gonna build it the next day

@morpheus554 7 месяцев назад

what are dimensions after placing Falcon on the stand ?

@AandAHobbies 7 месяцев назад

14” deep 20” tall and the width of the falcon

@morpheus554 7 месяцев назад

@@AandAHobbies thank you a lot :)

@troyhouse3149 6 месяцев назад

I will be so stressing, just like you did very soon

@chrisroma4201 11 месяцев назад

Glad you had good luck putting it on stand because mine pretty much fell apart in to 30 chunks .I would say this is the worst Lego kit ever made .way to heavy and Chinsey way to mount large chunks .but thanks for heads up on mounting points .had it built but wasn’t willing to just try to put it on till I seen someone else do it.I hated this kit so much that it got me to the point it’ll be my last Ucs .atat was a way nicer build and solid .titanic was a repetive build but stays together .afraid to even look at the falcon cause it’s just built like garbage .thanks again for the help mounting the stand .

@grahamread7208 2 месяца назад

Ok ❤❤❤❤

@kkjcid 3 года назад

you need to rotate it 180deg.. the cockpit should be on top not bottom..

@HeK. 2 года назад

Why? It works just fine with the cockpit on the bottom.

@xxdplayz3164 Год назад

Scariest thing to do so nerve racking really hope no one experiences breaking it

@KizzoGoezAmok 3 года назад

What's the name of the shelf?

@AandAHobbies 3 года назад

Vittsjo from ikea

@tsmdaniel1375 2 года назад

I broke a lot of my falcon trying to mount it, and broke a sweat watching this vid

@seandobson6221 3 года назад

Does anyone have a slowed down version of this because like he says the instructions are ridiculous

@AandAHobbies 3 года назад

You can adjust the speed on the video through RU-vid I believe

@seandobson6221 3 года назад

@@AandAHobbies thanks this set is a nightmare! I’ve put the Falcon together twice now and I’d rather do that than this stand. So hopefully if I can slow it down you’ll make it easier.

@JohnsOnStrings 2 года назад

Wasn't entirely clear what he did to attach it.

@seandobson6221 3 года назад

I am having the worst time getting this set put together. The instructions aren’t very clear and it’s really irritating.

@jaysamuelson6363 Месяц назад

That looks like a yikes if even the slightest thing goes wrong... Just a 900 dollar pile of sadness. Loved the video but I will probably go with an acrylic stand for this one.

@AceShadowbloodcivic 3 года назад

I just finished building it, I would definitely NOT recommend this thing ever. Instructions are probably the worst I’ve ever read, parts are not genuine and the pins are very sharp (assembly was a pain in the ass). I haven’t gone and tested this thing out because I have no faith in it.

@AandAHobbies 3 года назад

Robert Soroka I agree the Instructions are really bad, it does hold it pretty solid once it’s on, but it’s a pain to get mounted

@AceShadowbloodcivic 3 года назад

@@AandAHobbies I hope it does. Because the stand has one leg floating up in the air. Again, not pleased but I’ll try my best to get it mounted