UCS Millennium Falcon Stand Review and Install Efferman Stand:Vonado

Подписаться 5 тыс.

Просмотров 21 тыс.

50% 1

Hope you guys enjoy the video! Make sure to join the Notification Squad!!
In this video, I will be reviewing the Vonado Vertical stand for the UCS Falcon as well as showing how to install the stand with no help needed!
Donations Accepted but never Requested
paypal.me/ChristianLopez33
I Christian, owner of this channel assume no liability for property damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working with power tools, lubricants, hand tools, lifting tools, jack stands, electrical equipment, chemicals or any other tools or equipment seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not me and my Channel.

Развлечения

Опубликовано:

8 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@oregontrailcams1494 2 месяца назад

Thank you so much for this video. Your instructions and demonstration were the answer to my frustrations of trying to get the falcon on the stand w/o a complete destruction of the build. It worked great. Thank you

@Liquid_Cooled 2 года назад

That’s a lot of disassembly. I put the falcon on soda cans to lift it high enough where I can attach the stand from underneath, then just titled it upright.

@johnreutter6064 5 месяцев назад

After looking at many videos on this project you had the best bar none. Thanks for this great video.

@cullytube Год назад

Thank you for being so thoughtful, and detailed, I’ve been putting a lot of thought into how I was going to approach this, and it looks like you have the ultimate solution thank you so much.

@jkharmony Год назад

Woohoo! Thank you. Finally got to put my falcon on the stand with your detailed instructions!

@rodmorgan7041 Год назад

Excellent video, works perfect. I was panicking a bit when I had to turn it upside down on the pillows but no worries, didn't loose one piece, and as you say, all by myself. Just one point, at 3.30 you said you had to leave out the 4 lower 2x1 bricks but I found the pins located perfectly with them on. I'll just have to remove all the top panels again when I get the heavy duty shelf on my wall. Thanks again Christian. Keep up the good work.

@paulgould218 10 месяцев назад

Really helpful to see where the pins were located. Thanks!!

@edorn117 2 года назад

Thank you for making this video I bought a stand for my star destroyer off wicked brick and it had no instructions and I ended up breaking it now I will be buying this for the falcon

@ac4054 9 месяцев назад

Thanks for this video. Followed it and had no issues

@ChristianLopez33 9 месяцев назад

Glad I could help!!! Yeah it’s been 2 years and still working perfect!

@ericzembruski5744 2 года назад

God bless your soul, just put mine up like 10 mins ago and I prolly woulda shattered it without you ❤️

@theporg204 2 года назад

Thx, this helped me a lot with installing the build on the stand

@jamesraczka4629 2 года назад

Great vid and walkthrough of how you go about installing the stand.

@ChristianLopez33 2 года назад

Thank you for watching!!

@davidgaston7334 3 месяца назад

Thank you man!

@Kanooky_Jones 10 месяцев назад

Very informative. I purchased a very similar stand, assembled, but hadn’t yet put the MF on it. Good video-thanks!

@shanycesia3772 Год назад

Thanks for the video very helpful!!

@mojtabasalehi2966 2 года назад

Amazing Thanks for uploading this bro

@gencoupe3.8 3 года назад

Looks great! Had no idea this stand even existed

@ChristianLopez33 3 года назад

Yeah it's a great price and holds up well!! This set is too big to not have it haha

@basicallyimmario8616 2 года назад

Thanks for the help I wouldn’t have been able to figure it out by myself 😂

@shrekhasswag4826 Год назад

Thank you so so so much actually a goat

@kevinodw_ 5 месяцев назад

It took an hour to put together!!😂😂 Thanks for the help tough!

@Taylor59854 7 месяцев назад

This was great! Thank you!

@ChristianLopez33 6 месяцев назад

Thank you for Watching!

@Twunk82 11 месяцев назад

Thanks my dude.

@michaelsabell9294 Год назад

Great video, you were super helpful as I too bought this stand from Amazon (mine didn't come in a fancy "gift box" as the seller promised, nor was it the dark grey colour beams, but otherwise it's fine), at 2:33 in your video I also noticed this same issue during the construction of my stand, at no stage in my instructions did it show the beam connected through that long blue pin, only in images of the completed stand online did I notice it should be, but during construction I felt it should connect, it fitted, and (though I am yet to mount my Falcon onto it) it seems to make the stand more sturdy.

@rodmorgan7041 Год назад

I had all the same problems you had. It came in a crappy brown box, brick colour was light grey and found the same thing with that long technic piece not showing to link up with the blue pin. The instructions were so hard to read because the diagrams were so small. I'm only half way through assembling the stand at the moment but I wanted to watch it on RU-vid and it seems like everyone has the same problem. This has solved everything.

@legoanimation4917 3 месяца назад

Very nice video, thanks

@ChristianLopez33 3 месяца назад

Thank you!

@arren4013 Год назад

thanks bro, from China with love

@ChristianLopez33 Год назад

Thanks for watching!!

@Captainrave Год назад

I’ve just finished bag 10 and since the underside is complete will be placing it on the stand before adding anymore weight.

@brianjanisch8783 Год назад

I just finished bag 13 and decided to do the same to give me more room to lay out the pieces to complete the build. Then I get to take it apart to install the lighting kit. It'll look awesome once it's finally done lol.

@MrSebbyteo 2 года назад

Nice! Hi, may I know what’s the width or depth of the falcon on the stand. Need to check that it fits my shelf. Thanks a lot.

@Dan-dv8cy Год назад

How has the stand held up long term? Want to make sure it doesn't fall apart over time before I buy the parts for this.

@Wagzy 6 месяцев назад

What's the depth of the whole peice being on this mount? My display cabinet is only 40cm deep, I'm wondering if this will fit. Thanks!

@fcolliopoulos Год назад

Quick question can you let me know the height with the falcon attached as I want to install a shelf and need to know the height

@morpheus554 7 месяцев назад

what are dimensions after placing Falcon on the stand ?

@matttape8102 Год назад

That same piece fell off on mine where the heck does it go?!

@jamesmargrave4234 10 месяцев назад

Just wanna say you video is really good but the 4 small 2 peice bits you remove is not needed, I know alot say they won't fit they will you just need to wiggle the bottom 4 about a bit and semi very slightly compress the Stand between the upper and lower points

@CGibbsMusic Год назад

What's the depth on this thing? How many inches deep does your shelf need to be to get the falcon to fit on it while being as close to the wall as possible?

@blunthonesty8633 Год назад

I also want to know this. I really want to get the Falcon set but unless I get a stand for it I just don't have the space for the finished thing.

@josecantu5984 Год назад

Question , I just mounted mine on the stand and put for display ,,, is it easy to take it off the stand ? 😂 would it be easier to transport it for example to a new house with the stand on or try to remove it?

@ChristianLopez33 Год назад

So sorry for the late response haha, but leave on the stand I’d say, keeps things pretty stable!

@kamerongiudice8646 2 года назад

I wanna buy the stand but it gives me so much anxiety just thinking about it falling

@kayliegregg 3 года назад

So baller

@ChristianLopez33 3 года назад

Ya know it🤑

@inquisitor_snake 2 года назад

You posted this 5 months ago, how has the stand held up since then? I'm thinking of buying it but the fear of the set falling is terrifying

@ChristianLopez33 2 года назад

Been perfect!!! Stands in good condition. No bending or warping

@natewrld9397 8 месяцев назад

Can you do a video on how the stand is holding up over the years?

@ChristianLopez33 8 месяцев назад

I sold the set and stand approx 6 months ago. But if stood perfect for the year and a half I had it (:

@thatguywecalldana Год назад

Has anyone tried or considered building the falcon onto the stand as they go from scratch?

@thatguywecalldana Год назад

Or at a bare minimum install the stand as soon as the base of the falcon is complete rather than after the whole thing is done?

@ChristianLopez33 Год назад

Now that would be interesting to see!!

@haystack591 3 года назад

Sheesh

@ravenmiller6376 6 месяцев назад

How did he make it look eo easy @-@

@ChristianLopez33 6 месяцев назад

I had a little practice haha, did it like 3 times before recording

@ravenmiller6376 6 месяцев назад

@@ChristianLopez33 Let me just say when I did it gravity was not on my side..

@nathanc4543 Год назад

Basically have to deconstruct half the falcon to put that piece of shit stand on, but the one from wicked bricks and you’ll do 1/8 of the effort and it looks unreal

@mrdurva9532 Год назад

A $30 stand versus a $75 stand....of course the $75 stand will be better lol

@nathanxbond 10 месяцев назад

Wow I wouldn't trust displaying anything on that janky stand, let alone a UCS model. It looks like its about to crumble and it looks terrible. There are far better options out there.