No video :(

ULTIMATE COOL Studio Music Desk (Part 1/4)

Подписаться 1,8 тыс.

Просмотров 127 тыс.

50% 1

I show you, in detail how to build a very expensive looking home studio music production desk for under $500 US Dollars.
Part 1 of 4
Part 2: • ULTIMATE COOL Studio M...
Part 3: • ULTIMATE COOL Studio M...
Part 4: • ULTIMATE COOL Studio M...
If you are interested in any of the tools or bits I use in this video links are below
Main Circular Saw with Guide Rail: goo.gl/CGM1wF
Chop Saw: goo.gl/wSQYb8
Jig Saw: goo.gl/3bpRAR
Drill / Screw Driver: goo.gl/4dLt3w
Router: goo.gl/Dp8rNW
Sander: goo.gl/xbYQz3
Pilot bit set: goo.gl/ks49Cj
Counter Sink Bit set: goo.gl/zkf1NH
50mm Screws: goo.gl/USdVUS
12mm Screws: goo.gl/XGs6z5
Digital Angle Finder 200mm Long (The One I should have bought) goo.gl/k68TJv
Carpenters Set Square/Combination Square: goo.gl/t4JFzd
Spirit Level Stabilia goo.gl/PkgLK2
Clamps: goo.gl/29Qrsv
180 Grade Sand Paper: goo.gl/ZhQ4sm
Dark Oak Stain: goo.gl/4QYTqi
Furniture Finishing Wax: goo.gl/dXNKA6
My Worktops (eBay Germany links) goo.gl/733GvD
Racks Rails: goo.gl/pUKgfF
Rack Blanking Plates 4u: goo.gl/255hAq
Rack Blanking Plates 1u: goo.gl/Vp7iU5
Rack Screws: goo.gl/uYZvpb

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@Turbonicplague 3 года назад

It’s crazy how much reverb popped up after you cleared the stuff from the room. Great build good job and thanks, definitely love your design this is the one I picked. Love it cheers

@TeReKeTe 4 года назад

Mike-- Built my desk inspired by your videos, including the cardboard models. I added some monitor platforms above the racks, widened the center section-- and worked in inches, which was not fun. You nailed this tutorial, especially managing the ergonomic angles-- thank you so much!

@AudioReplica2023 5 лет назад

Great, but easy with the lighting. You almost looking like cocoon the movie. Loved the video and detailed instructions👍🏽 Very helpful cuz im looking to make something like the first unit you did.

@psychopathicfish97 3 года назад

Looks like an early reflections nightmare! Cool design and great job still!

@keysbythenumbers 5 лет назад

Mike, do you the dimensions or plans you ca share?

@jimmyacha6888 4 года назад

This is the best desk designed !!!

@AnalogFighter 4 года назад

Hello Mike. This Build i awesome! At the moment i use a great massive Office Desk with 2x 4HE DIY Desktopracks. Thats great but for my new Studio i want more comfort and a Rackmixer in it and this is the perfekt Projekt! Thanks a lot!

@nickrhymes7403 4 года назад

hey mike, do you possibly have the plans for this desk? would be greatly appreciated, nice content!

@junaidf 3 года назад

Can you share your plans for the desk including dimensions of each piece? Thanks

@fedup3449 2 года назад

If you were really spetsnaz you wouldn't ask for dimensions. You'd go in from a chopper, down the rope, abseil slingshot through the window, nick the plans and exfil via the upstairs bathroom window. Bish, bash, bosh. In and out, no mess, in under 4 hours.

@braedenlane 2 года назад

Dude please upload these plans. I was about to buy a Zaor Onda until I saw your video. I would gladly pay for them.

@jaysontorres2439 4 года назад

Nice video. Thanks for sharing. Just a word of caution. MDF material is made with formaldehyde, which has been proven to cause cancer. Wearing breathing respirator or some sort of protective gear is highly recommended, when cutting, sanding, etc. once painted.. it’s ok.

@sekritskworl-sekrit_studios Год назад

These videos would fit well in a playlist.... any drawn designs?

@RecordingStudio9 6 лет назад

Great, simple but useful design. Thanks for sharing. This might be my next project.

@Soundman-Lmnor 4 года назад

Tank you man. I bild it like you say, and it work butiful. Thank you very mach.

@SamanthaIreneYTube 4 года назад

Ever consider designing one with a PC build into it? Like placing a glass or plexiglass top and the components inside it with a rig for the Motherboard and GPU under the glass for easy access removal and upgrade?

@PrinceWesterburg 4 года назад

Long bearers made of MDF? Good luck with that - probably best to cut them off and bolt on some solid wood lengths instead. You could have spent less on MDF and avoided a lot of cutting and dust.

@Nagadosch 2 года назад

I can recommend the Wave Nature Master's Place, price starts at 899 Euros

@valbeccia8591 5 лет назад

Thanks, great video, exactly what I was hoping to find, thanks again! Aewsome design!

@insomnia1on1 Год назад

Good job

@FabioLampero 4 года назад

Hey, thank you for making this videos. I have recreated the desk and it is awesome! Thank you very much!

@AzzadousStudios 5 лет назад

Nice one! Thanks for sharing. Hoping to build something similar very soon 😀

@WeStayTrueUK Год назад

The DJ photos on the t-shirt your wearing are of me and my mate

@MrBlessup247 6 лет назад

Very nice & and nice vinyl collection too 😊👌🏽

@blakecasimir 6 лет назад

Great video and series, Mike. I hope we might be seeing other musical content on your channel?

@MikeGolding1 6 лет назад

BlakeCasimir Thank Blake... yes, I’ll be doing more on the studio build itself and then when it’s done more music related content, jams, mixes, reviews, etc.

@NoLosses Год назад

did you happen to have a parts list or cut list

@alexsdmmx 4 года назад

Great video, thanks for sharing!

@iamdrumatix 6 лет назад

I feel like you don't need those inner feet. Just the vertical leg

@levichyrek7859 4 года назад

Thank you for this great video. Where did you get the large wood board that you used for the desks sides?

@rainewilliams4872 4 года назад

Could you not cut identical angles on the top wood, kinda work it backwards from what you were saying. Build the top with the dimensions you want for the units, then build the two legs to the size allotted by the cut you made before. I think there’s a lot less science and it can be made a lot less difficult. But overall I loved the video and it’s a great tutorial.

@aculeus1971 5 лет назад

This isn’t based on the Argosy Halo by any chance ? Next video after this was Pete Thorn and his new $2000 Argosy desk ... very similar shape.

@Allthewrongkeys821 4 года назад

I see you have a vacuum atratchment for the circular saw you were using. Even with that MDF is nasty to breath in. Please use a respirator mask even if for the sake of demonstration.

@NickCent 4 года назад

You're the best! Thank you!

@torstenrausch8033 5 лет назад

Please use safety EyeWear....

@otherworlddogs9628 4 года назад

do you have the plans for this dude?

@dingbatjack1234 6 лет назад

Thanks for this! Could it accommodate a pull out keyboard tray?

@tedz3pp3lin 5 лет назад

I'm wondering the same

@roundprairiedairy7006 5 лет назад

if you can make it work!

@khaleedmatmati5681 6 лет назад

Love the design! where did you get the wood for the desktop?

@jp45424 5 лет назад

That's a great question, I"m wondering the same.

@bobbybebrave4756 5 лет назад

Your awesome!!

@Bomo-gt6zn 5 лет назад

Podrías poner un plano con todas las medidas exactas? Gracias, Un saludo.

@dariotapia6209 4 года назад

veo q hablas español! pudiste conseguir las medidas??? estoy pensando en construir uno por mi mismo

@davehill9951 3 года назад

So the 500 dollar desk and the amazing tools to construct the desk would cost me how much?

@33AndAThirdRPM 3 года назад

Wear some safety glasses as poop happens every now and then when you least expect it. Take care of those peepers!

@Coa_PCL 4 года назад

where do you put you studio monitors?

@MikeGolding1 4 года назад

I have them on stands behind the desk, gives flexibility on distance from the middle for left and right placement

@hp7vlogs 4 года назад

Dope as fuk. Thank you

@CharyAry 4 года назад

Do You Have The Dimensions ?

@MikeGolding1 4 года назад

Not listed separately but everything is in the video. at 10:25 on the first video the dimensions of the side panels are shown.

@bjbeardse 3 года назад

Your drummer still couldn't do it. Keep the bass player away, he'd find away to win a Darwin Award while building it.

@jordangreen6768 3 года назад

No way under $500. I have a whole workshop and personally own that very makita track saw. The tool alone is $500+, even if you managed to rent these tools nobody is going to give you over $1000 of tools without a upfront deposit of $250+, plus stack the cost of mats and hardware, paint and consumables....the total will be over $500 guaranteed. Maybe different outside of the States, but even then, I think you're not being completely honest

@G-O-N-x Год назад

Depends if you have friends or family who can share their tools

@hybridstudios39 10 месяцев назад

I did mine under and paid to have the wood cnc’d bc I didn’t feel like doing the cuts. Wood was $160 with plenty to spare 2 sheets of 97x49 and 1 sheet of birch for the beauty panels that was stained I went over 500 when I intergraded led lights and a usbc hub but that was a personal touch, without I was under $500, could been under $300 if I didn’t pay for cnc cuts

@yankeedrummer21 5 лет назад

No untrained person should use any of those power saws, in the wrong hands they are bloody lethal and the number of fatalities even with professionals is staggering

@keysbythenumbers 5 лет назад

Eeh, right😏

@yankeedrummer21 5 лет назад

@@keysbythenumbers Each year, 250,000 people are injured, and 70 people die in DIY-related just in the UK alone

@keysbythenumbers 5 лет назад

@@yankeedrummer21 And just think how safe it is to drive. Rin those numbers in comparison..and I think were doing ok.