Ultimate Greenhouse Automation: DIY Irrigation System Step-by-Step 💦

Подписаться 199 тыс.

Просмотров 5 тыс.

50% 1

Discover how to automate your greenhouse irrigation system like a pro! Learn about pump selection, filtration, drippers, and smart controls. Perfect for gardeners and chili growers looking to save time and improve plant health. Featuring step-by-step instructions and insider tips from years of experience.
Drippers: geni.us/presdripper (I use 4l/h)
NC AC Solenoid Valve: geni.us/ncvalve
U Channel: geni.us/uchannel
U Channel fittings: geni.us/uchanfittings
Disc Filter: geni.us/discfilter
Pipe Cutter: geni.us/plasticpipecutter
13mm mainline: geni.us/13mmpipe
4mm drip line: geni.us/4mmpipe
Inline taps: geni.us/irrigatetap
Barbed fittings: geni.us/barbedfittings
FL43 Pump: floodandwaterpumps.co.uk/prod...
DAB Pump: geni.us/esyboxmini3 (You may be able to find this cheaper elsewhere)
Join my channel
ru-vid.comjoin
OR sign up to Patreon:
/ chillichump
Sign up to my newsletter to get alerted of new sauces, spices, merchandise...or any other big news. www.chillichump.com/newsletter 🔥
----------------------------------------------------------
Any links to products or services may be affiliate links that give me a small kickback at no cost to you, and with no influence on the content. I use Geni.us to help geo-target, ensuring you are linked to the correct country's Amazon website -- As an Amazon Associate I earn from qualifying purchases.
Websites
🔥 www.chillichump.com
🔥 chillichumpseeds.com
🔥 seedsio.com
Note: All information provided by ChilliChump is furnished only for educational/entertainment purposes only. You agree that use of this information is at your own risk and hold ChilliChump harmless from any and all losses, liabilities, injuries or damages resulting from any and all claims.
0:00 Introduction
0:33 Internal and External Tanks
1:16 Filters for irrigation
2:09 Feeder Tank valve
2:44 Pumps
3:00 Ideal Pressure for drip irrigation
3:10 Propump FL43 On-demand Pump
3:40 Single pump, multiple grow spaces
3:58 Variable drive pump DAB Esybox 3
4:42 New Greenhouse Automation and Irrigation
4:54 Installing power: AC vs DC
5:39 Fan in the Greenhouse
5:55 Irrigation Setup
6:56 Irrigation Drippers (Pressure Compensated and Serviceable)
7:22 Solenoid Valves
8:17 Greenhouse Automation, Custom PCB and IOT
10:12 Lets finish up
11:15 Barney Bonus!

Хобби

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@ChilliChump 17 дней назад

I am so lucky to be able to combine two passions of mine....Chillies and Tech! I hope you enjoyed the video. Below are most of the parts I use in the system, as well as some useful links: SeedsIO: seedsio.com ChilliChump consulting: chillichump.com/chillichump-consultancy/ Earlier automation video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RpdaaCLvpfU.html Cleaning Drippers: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mPexdl3BOaE.html Automation 101: ru-vid.com/group/PLuQ_ySnkV1elVl8hCvmYyEzjs_vxEIsxu 📡Parts Drippers: geni.us/presdripper (I use 4l/h) NC AC Solenoid Valve: geni.us/ncvalve U Channel: geni.us/uchannel U Channel fittings: geni.us/uchanfittings Disc Filter: geni.us/discfilter Pipe Cutter: geni.us/plasticpipecutter 13mm mainline: geni.us/13mmpipe 4mm drip line: geni.us/4mmpipe Inline taps: geni.us/irrigatetap Barbed fittings: geni.us/barbedfittings FL43 Pump: floodandwaterpumps.co.uk/products/fl-water-demand-pump DAB Pump: geni.us/esyboxmini3 (You may be able to find this cheaper elsewhere)

@s18169ex3 17 дней назад

I can never get enough. My daughter asked me the other day. Were or what was my inspiration to try to make a hot sauce business. I said CC was and still is the reason I have the passion. And it was to y surprise. ATX sauce was also inspired by you at about the same time I started following you. He also makes some sauces that I look forward to making. Keep it spicy.

@ChilliChump 17 дней назад

Did you see my interview with ATX on one of my recent livestreams?

@BalticHomesteaders 15 дней назад

Really nice to see an update. Your tutorial videos sent me down a fun rabbit hole of automation and after a year of using my v1 system I'm already planning v2 with various upgrades (thanks again). It looks very neat on the PCB, something I'd not considered, I think mostly as I'm constantly wanting to change things. Yeah re making stuff public it's a bit of a can of worms, I've been asked a few times already and as I see it the problem is that of support/warranty.

@murdog04 17 дней назад

This is what you get when you have a computer engineer growing chili’s :). Crazy good and impressive system. Your property and set-up always blows me away. Love all you do my friend. Stay Spicy!!!

@ChilliChump 17 дней назад

Lol. Indeed my friend! Why do things simply when you can complicate it with tech? 😄

@craigdawson7632 16 дней назад

@@ChilliChump Over built things are always awesome. 20 psi of boost is needed to go to the supermarket. 1/4 MOA with ballistics calculator, for a afternoon of rabbits

@PetesChilliHouse 15 дней назад

Absolutely brilliant Shaun, i was watching your first video on automation the other day. you make it look so easy 😂. This of course is so far beyond that...great stuff as always

@ChilliChump 15 дней назад

Thanks mate. It's certainly moved on quite a bit, small changes each year add up!

@bradleycrossland8451 16 дней назад

Incredible,so much technology. I'm still a cave man with a watering can. Fantastic vid shaun, keep them coming.Cheers brad from north lincs👍

@joevile5328 17 дней назад

Simply inspiring. Us mere mortals can only dream of such a setup. Definitely going to watch your how to guides on automation and give it a go! 😊

@ChilliChump 17 дней назад

I started small! Have a look at my very first video, which started this channel off. I was growing in a mini portable tent thing. Its taken many years to get to this! Good luck with the Automation guide, hope you find it as fun as I do!

@NickW-q3x 16 дней назад

Great content as always. All the seeds i bought from you are doing very well👍

@ChilliChump 16 дней назад

Thank you Nick, and that's fantastic to hear about the seeds! 🌱🔥

@pawepanka7783 17 дней назад

Great content, thanks

@ChilliChump 17 дней назад

I'm glad you enjoy it!

@craigdawson7632 16 дней назад

Do you ever have growth in your feed lines? It's always been my concern and has kept me hand feeding plants. My 4L drippers are sealed (two per a pot off a ring main), They were cheap but you can't clean them, seemed like a good idea at the time for the money. Also I'd be worried about killing my microbes & bacteria in my feed with a hot pump working like a food processor. As for mains we have to dig it in 600mm deep and armour it with danger tape above it. Or over head wires, I've used 12V solar fans and battery powered timers. I've thought about a 48v system with DC buck converter and a small inverter where needed. Saves those spendy cable runs but batteries aren't cheap either with running lights or 4 fans nearly all the time. I'm very keen to see your automation setup in detail 👍

@ChilliChump 16 дней назад

In my first installation I had growth in the feed lines...because I didn't flush the system at the end of the season. I now make sure to run clean water through at the end of the season to clear out any nutrients that may be left in the pipes. I also have taps at the end of each dripper run which allows me to drain the system too. At the beginning of the season I then check that each dripper is flowing and I may get a few that need a clean. But otherwise its all good! Here's a video of me sorting out drippers at the beginning of this season ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mPexdl3BOaE.htmlsi=aEgqbFUebIjq-nNB

@craigdawson7632 16 дней назад

@@ChilliChump I thought some funk would grow in the pipes with the heat. My current drippers are pressed together. Should probably buy a bag of decent replacements to have on hand. Do you feed exclusively organic, do you think there is any extra risk with organic feed for blockage other than particulate?

@PreatorRaszagal 16 дней назад

"I have a few more greenhouses". That's a slight understatement 🤣Nice system though. If I had power and space for some kind of water tank on the balcony I'd be interested by something like this for sure. But I have neither, so I bought an AutoPot kit instead! Hoping it'll work out well! It is still interesting to see how these things are built! So you replaced the moles with a digging dog? Or was he digging *for* moles? 😄

@ChilliChump 16 дней назад

He is attempting to get the moles! No luck yet 🐶

@PreatorRaszagal 16 дней назад

@@ChilliChump Aha. Practice makes perfect! 🤞

@PimP-s9b 9 дней назад

Really nice video, thanks! What kind of box are you using at 9:50? Is it custom made (the screen part)?

@ChilliChump 9 дней назад

Standard box, 3d printed screen housing

@GurpreetKaur-hd2fx 12 дней назад

Do you have a link for the fan you use please? Or any others you recommend that can be hanged/mounted, Thankyou 🙂

@grahamhyndman8996 16 дней назад

13mm Main line to 4mm Connector - Hi could you give us the link to the connector that goes from the 13mm main line and has the 8 x 4mm outputs to the dripper lines please.

@ChilliChump 16 дней назад

I bought a bunch in bulk. They don't appear to be in stock from where I got them. I will have another look tomorrow and reply here if I find a source for you. You are in the UK?

@Count_Ade 15 дней назад

Hi, off the subject for this video forgive me, but I'm looking for printable labels for the 5oz woozy bottles. Did you manage to find any? Many thanks, Ade 😊👍🏾

@ChilliChump 15 дней назад

I bought a commercial printer for my sauce business so I use continuous rolls of labels. You can get labels for your home printer in A4 sheets. Look up Avery labels and get the size you need

@friendlyfox4572 16 дней назад

When’s the next greenhouse chilli update?

@ChilliChump 16 дней назад

Most likely next week

@C3Voyage 15 дней назад

Where are you located?

@ChilliChump 15 дней назад

I'm in the UK

@bondemanden 6 дней назад

What is the name on the barbed 3/4 til 8 pice 4mm

@ChilliChump 6 дней назад

@@bondemanden it's netafim

@bondemanden 4 дня назад

Cant find them 😅

@john-smith. 14 дней назад

Your dripper link doesn't take me to the page of drippers your using.....just a bunch of different general drippers. Can you tell me the brand name/type of the drippers your using in this vide.

@ChilliChump 14 дней назад

Which country do you live in?

@john-smith. 12 дней назад

@@ChilliChump USA....Can't you give me the brand name?

@ChilliChump 12 дней назад

@@john-smith. It's a UK brand. That's why I asked. There are equivalent models that are likely the exact same thing, just with a different brand name. Which are what I linked to before. The brand is hudrosure

@MrSBGames 13 дней назад

Seems a lot of work 😂 I'll just stick to my water butt and a watering can

@ChilliChump 13 дней назад

I don't turn on my automation for the beginning of my season, so I hand water. Take more than 2 hours each time! I would hate to be doing that later in the season 😰

@benjaminh.7698 16 дней назад

Affiliate links are not the products you showed...

@ChilliChump 16 дней назад

Which country are you based?

@benjaminh.7698 16 дней назад

@@ChilliChump Germany. Most of the links redirect to search pages...

@ChilliChump 16 дней назад

@benjaminh.7698 I use a service that localises the link depending on the country you are in. I can't manually find links to the exact product in every countries amazon unfortunately, and on top of that I can't keep them updated and monitor when stock runs out or the product is delisted. The service I use allows me to do that more efficiently. The link is primarily based on the link in the UK, which is where I purchase from. Sometimes the system is clever enough to find the exact product, other times I have a search term which should search for the product and hopefully get close. What specifically are you looking for?

@benjaminh.7698 16 дней назад

@@ChilliChump I am looking for the drippers. An Amazon Uk link would be ok for me.

@ChilliChump 16 дней назад

Try here if you can order from the UK (use this link to get £5 off your order rwrd.io/eytz1mb?c) www.waterirrigation.co.uk/drip-irrigation-components/micro-emitters-stakes-extensions/micro-drippers/pack-of-20-hydrosure-pressure-compensated-easy-clean-micro-irrigation-dripper-4l-h.html

@bradcarby3765 16 дней назад

I've always enjoyed your automation stuff. It is very much in the realm of things I like to mess with. That being said, I feel like your actual irrigation setup is an unadulterated bag of dicks (in the nicest possible way). There shouldn't be switches and wires and solenoids all over the greenhouse. Centralise all that stuff and let the plumbing do the work. I also recommend using 19mm hose instead of 13mm because, well, if you do it, you'll see how much better it works out. Sorry, love your content.

@ChilliChump 16 дней назад

All plumbing is 25mm. The last leg for drippers is down to 13mm, then 4mm. No need for anything more. It's more than enough for the flow rate. And not sure what you mean by centralising? Each grow space is being monitored independently, and therefore controlled independently. The pump is centralised, running 25mm through to all spaces. If I had all valves sitting where the pump is then I would have to run multiple pipes to each grow space. Instead of a single run like I have now. In each grow space I have multiple zones so I can independently water each zone as needed.