Ultimate Harley Davidson Low Rider ST Brake Upgrade!

Подписаться 7 тыс.

Просмотров 4 тыс.

50% 1

We are back with yet another update on the Harley Davidson Low Rider ST build! This visit we had to tackle some issues with the Brembo brake master and fitment with the FXR division bars. The team over at Champion Cycle are building some custom pieces to make it all work and we are stoked on how it'll all come together!
The El Diablo will be out on the road soon - Keep watching for more!
OUR WEBSITE: www.Indestructiblemfg.com/
USE CODE: RU-vid15 FOR 15% OFF SITE WIDE
LINKS 🔗
Shop ➞ www.Indestructiblemfg.com/
Instagram ➞ / indestructiblemfg
Facebook ➞ / indestructiblemfg
Custom Paint ➞ / ironfistkustoms
Gloves we wear ➞ www.odinmfg.com/
ABOUT INDESTRUCTIBLE MFG
Indestructible MFG was founded in 2018 by tattoo artist Matt Vanasse and barber Dan Brenndorfer. Originally a basement hobby in a barbershop, the brand has now become recognized worldwide, sold in countries far and wide. The brand is steeped in the tradition of tattooing, as well as alternative music and motorcycle culture. At the heart of Indestructible's aesthetic is a strong sense of community, a deep connection to traditional tattooing, and unwavering customer loyalty. Based in Toronto, the brand is renowned for crafting simple yet bold pieces that pay homage to timeless traditions.
OUR BIKES 🏍️
Dan - 2021 Harley-Davidson Road Glide Special
Matt - 2022 Harley-Davidson Low Rider ST El Diablo
GEAR 🎥
GoPro Hero9
Canon 5D Mark4
Deity Mic

Авто/Мото

Опубликовано:

8 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@ryanridesmoore 3 месяца назад

For the brake pressure switch check out original garage Moto they make a switch specifically for your situation on m8 softails with the brembo master cylinder.

@IndestructibleMFG 3 месяца назад

Will do!

@markhackman8566 Месяц назад

Looking good …FYI all bike reservoirs are up higher than the master cylinder as air rises mounting it lower will keep any air bubbles in the master cylinder being it’s higher

@IndestructibleMFG Месяц назад

👍

@franksilva7920 3 месяца назад

Once again you guys are awesome👊

@IndestructibleMFG 3 месяца назад

Thanks frank 🤝

@sickinmyduck3978 3 месяца назад

TTI makes a mirror mount for the brembo master that allows you to run stock mirror location. Curvy girl makes a brake switch for the RCS19 Master that allows proper function of the front brake light. I have the same brembo master on my ST and run both with no issues. I can send you the part numbers and pics of it on my bike.

@tmoneyman1029 3 месяца назад

Do you have a link to the brake switch?

@IndestructibleMFG 3 месяца назад

We needed up getting a custom piece made to fit the FXR division bars. There’s a little cut out in the bars we wanted to cover. Looking into the switch but honestly not the end of the world

@johnnybotello4304 3 месяца назад

Bike is coming out amazing

@IndestructibleMFG 3 месяца назад

Thanks! We have a little surprise for next weeks vlog 👀

@BrancoFXDC 3 месяца назад

Cant wait for the finished product

@IndestructibleMFG 3 месяца назад

Well it’ll be a little longer now. You’ll find out why in the next vlog.. 😉

@Bartypoy 3 месяца назад

I had my windshield wrapped, it turned out great.

@IndestructibleMFG 3 месяца назад

Will look into that

@BlacksheepTyler 3 месяца назад

god im so glad you put the brembo master on i see so many harley people with brembo calipers on there bikes with there stock master not realizing the master is what makes the difference. i upgraded to a brembo master cylinder on my diablo with with factory calipers and it made it night and day stopping power.

@IndestructibleMFG 3 месяца назад

Yeah that’s what dan at champion said. It’s the master that makes all the difference. Can’t wait to test it out!

@dancole909 3 месяца назад

Very nice

@IndestructibleMFG 3 месяца назад

Thanks dude 🤝

@lukepaso1993 3 месяца назад

As mentioned twisted t and kruesi have been through this brembo master/switch and mirror mount issue before The master is meant to make the most difference even with stock calipers let alone brembo lowers to match Should be worth the hassle🔥

@IndestructibleMFG 3 месяца назад

Went with a custom piece to fit the bars perfectly. Yeah apparently the master is what makes the most difference!

@monsieurjemenfiche 3 месяца назад

You can tap the Brembo pump from the M6 screw to whatever fractional measure it is and use the bolt you need, which is the easiest way to do it.

@IndestructibleMFG 3 месяца назад

👍

@twinsmotogarage1866 3 месяца назад

Twisted T Industries makes a mirror clamp for the Brembo master cylinder.

@IndestructibleMFG 3 месяца назад

Thanks. Ended up having a piece fabricated to fit the FXR division bars perfectly.

@WarFighter_FXLRST 3 дня назад

What fork tubes did you go with, Have you noticed any premature wear on them?

@IndestructibleMFG 3 дня назад

It’s all from big bear performance. They’ve been great so far!

@paulsilson2148 3 месяца назад

What a salesman that guy is. You only live once , get done what you want and enjoy, looks good

@IndestructibleMFG 3 месяца назад

Oh just wait til next weeks vlog to see what else we are doing !

@vicslick122000 3 месяца назад

Kleen moto brake switch kit for the bike.

@IndestructibleMFG 3 месяца назад

Will check that out

@vicslick122000 3 месяца назад

Get the arp center triple trees bolt.

@IndestructibleMFG 3 месяца назад

Haha it’s on the list..

@matiaso81 3 месяца назад

Will the cruise control work without brake switch?

@IndestructibleMFG 3 месяца назад

I don’t see why not.

@matiaso81 3 месяца назад

I suppose the correct question would be, will the CC will turn off when you apply the brake without the switch?

@IndestructibleMFG 3 месяца назад

Ah gotcha. That’s a good question. Rear brake will but we will have to ask about the front.

@raymond4882 3 месяца назад

are you guys going to ride out to Born Free this year?

@IndestructibleMFG 3 месяца назад

We will have a booth at born free and the bikes will most likely be there

@leecalotes7330 3 месяца назад

Check out kruesi originals and he wired it in thru the factory controls on a m8 softail same exact set up and for the brembo he was showing the mounting kit to mount the mirrors on factory location the company name is twisted t industries. Cheeers! From wpg manitoba🙏🏽🙏🏽👊🏽 sick fukin bikes broskis!!!

@IndestructibleMFG 3 месяца назад

What’s up homie! Will look into that. Not the end of the world if we don’t set up the switch, at least the rear brake can activate the light. Ended up making a custom piece for the mirror mount.

@_All_Might_Is_Here 3 месяца назад

Don’t paint the windshield, put blacked out limo tint on the backside.

@IndestructibleMFG 3 месяца назад

Noted. Thanks for the tip

@HaVoC_TX 3 месяца назад

Ok guys I have the first set of rules for the IDX MC. 1.) Must have Harley. 2.) Must be blasted (original founders will determine how much coverage needed). 3.) your choice between Green, Blue, Grey, or black dickies. 4.) IDX logo tattooed in visible spot once accepted. Let’s go!

@IndestructibleMFG 3 месяца назад

🤣🤣🤣 I’m dying over here! You recruiting for us ?

@HaVoC_TX 3 месяца назад

Yes. Going through applications now lol