Ultimate Ryft Build Troy Edition

Подписаться 73 тыс.

Просмотров 26 тыс.

50% 1

This thing turned out GREAT!!! I did all the tricks I know to the transmission case to get full shifting and set everything else up as best I can. Links are below for the Ryft and all the parts used in this build, take a look and help support Exocaged RC, Thanks!!!
Transmission build details at 3:50
Axial Ryft RTR
Amain bit.ly/3iKnkkV (Black)
Amain bit.ly/3skmAWK (Orange)
Amazon amzn.to/3EAsdGn (Black)
Amazon amzn.to/3hHO5FT (Orange)
Ebay ebay.us/ygiuEK (Black)
Ebay ebay.us/n8RvdP (Orange)
All the Vitavon parts
Front and Rear Axle housing ebay.us/Klifrw
Front Axle housing ebay.us/ge78hk
Rear Axle housing ebay.us/qnSPmF
Input Shaft ebay.us/xCMOKN
Trans Case ebay.us/SSGI88
Knuckles ebay.us/dUkiPG
Links ebay.us/UEuOtU
Rear Arms ebay.us/m1SU4x
2.2 Beadlock Wheels ebay.us/Os2sHc
Diff Cup ebay.us/zpbEZf
Steering Link with Saver ebay.us/Tx1yP4
Front Swaybar ebay.us/vxqkVz
Rear Swaybar ebay.us/ZOuDZM
Servo AF Model A Servo www.servoaf.com/product/servo...
Reefs RC 99 Micro www.reefsrc.com/shop/p_651716...
Amain bit.ly/37mzBpj
Ebay ebay.us/RSvzMo
Kyosho 5x7 shim set
Ebay ebay.us/b0YMJO
Castle Mamba X ESC
Amain
Ebay ebay.us/KRRcB4
Holmes 2100kv Motor 540 L
Holmes Hobbies holmeshobbies.com/motors/brus...
Ottsix USD Sticky
Ottsix www.ottsix.com/usd-sticky
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc

Развлечения

Опубликовано:

16 сен 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@old-rcplane-phart 2 года назад

Now, its a $5000.00+ ryft!

@robgoffroad Год назад

Love those orange wheels!

@timvanasen6711 2 года назад

Nice build Joe, Troy will be very happy 😉👍

@Houleigan 2 года назад

Wow! Expensive build! Looks amazing though! Excellent job!

@mikeboncheck5555 2 года назад

Can't wait for the front sway bar set up... Mine should be here by the end of next week

@Nick.Barnes 2 года назад

thank you for putting this video out! i just went through all these upgrades on mine and i've been on the fence about two speed and now i can do it correctly if i actually decide to go that route. vitavon parts are amazing and i thank you for turning me onto them!

@mikep.9338 2 года назад

No lie those lectrons are some good lipos picked up a couple awhile ago still going strong

@calebgilmore3327 Год назад

About to be doing a lot of this to mine! May have to reference it as I go.

@phillipgatelein8591 2 года назад

Sweet tyers!

@RuisRcAdventures 2 года назад

That was awesome Joe, your mate is gonna be really pleased with that for sure. Let's see if he runs it on 4s 👌

@ExocagedRC 2 года назад

He will I’m sure

@GrimJerr 2 года назад

I haven't been driving mine as much as I like. Just got Vanquish servo horns and some rod ends until i can afford to upgrade to the Vitavon Steering Links and servo saver. I was tearing up th Axial horns whenever I hit anything solid with force.

@jeffparryncc1701 2 года назад

I'd like to see the foam on the scale be used as a tire insert :) Looks great.

@boharris8179 2 года назад

I use the plastic skid, transmission and plastic steering knuckles. Also the stock driveshaft and for the diff just blast it out with break cleaner then fill it up with JB weld. Aluminum housings front and rear with upper links and sway bar and wheels. Some guys run everything metal also some rigs use rear trailing arms for the front. Next you should try a metal custom made chassis.

@GreatLakesRC 2 года назад

Good lord that's alot of aluminum 🤩

@mikep.9338 2 года назад

Lord all them goodies it's Christmas 👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾 wished I had went vitavon instead of kyx

@ExocagedRC 2 года назад

Oh man. Yeah. Have you had any issues with kyx?

@mikep.9338 2 года назад

@@ExocagedRC no...no issues at all some things from kyx are alright but for the most part their stuff is jus bland,when you look at vitavon your like damn that's some good stuff right there. I never thought vitavon would come up like they have, their work is really nice and from the abuse you bestow ,their product would probably outlast me lol. I do want a set of the ryft axles for my last build but Brother you have a wonderful day👍🏾👍🏾👍🏾

@chadlunsford6730 2 года назад

I'd like to see a battle between the Ryft and the Windengo :)

@teamsargentrc6399 2 года назад

Beautiful job very professional Job!🤜🤛👊👍

@gordonthorn2049 2 года назад

Appreciate it. I think I'm gonna copy this build. Gotta have a better rc than my brother.

@ExocagedRC 2 года назад

LoL

@NCMOUNTAINSbackyardRC 2 года назад

O yea sweeet 👍

@old-rcplane-phart 2 года назад

Up at 355am😳

@GrimJerr 2 года назад

My Vitavon 4WS RYFT Bouncer "Bumble" comes in at around 13lbs. with 4s battery

@ExocagedRC 2 года назад

That’s heavier than mine.

@jonthomas8487 2 года назад

The only thing that’s left from the original Ryft is the cage, shocks and gears. Crazy

@Houleigan 2 года назад

Also can add rear steer if wanted!

@ExocagedRC 2 года назад

Yep!

@ruger1420 2 года назад

Pretty pimp ryft. I was pretty close to throwing mine in the trash. Like reeeally close Broke axles front. . Center diff gears striped. Twice. But . Mines stock except I bought the locker spool for the center diff. Much better. Don’t have the cash for the fancy vitavon gear. Works good though. Just can’t bash it to much. Lol.

@johnc3399 2 года назад

When you gonna put on a Ryft comp at the exoplex? My ryft is built and ready.

@ExocagedRC 2 года назад

I’m still saving up for dirt to build a few climbs and I’m planning to race them too.

@davesadowski568 2 года назад

Any info on the bungee limit straps? Lengths and where to get them at?

@vbspeed7571 2 года назад

Do u sell the stock parts if so would love to buy

@HEATRACER24 2 года назад

What sway bars can you recommend for the Ryft? I just got one yesterday and are the Axial made sway bars the same front and back?

@jakethole 2 года назад

All right I really want to know cost total in all this

@spawairguns4950 2 года назад

New sub here and nee ro RC! I have a gas DBXL 2.0. Just ordered some Vitavon goodies because you! Im in NE Florida, your track is cool. Where you located? Thanks again!

@ExocagedRC 2 года назад

Oh man awesome! I’ve got Vitavon DBXLE parts in stock. I’m in Middleburg

@Cooldibs 2 года назад

How much did all that add up to?

@00gavin 2 года назад

Great build! How are you using the kinetic tow strap?

@ExocagedRC 2 года назад

It’s just set to help limit the front end from unloading on climbs

@frankbunton5505 Год назад

Help! I'm having issues with the stock springs. Just finished building the RBX10 kit and mention that this shock springs bend when under tension. Is there a cheap way to fix this? Thx!!!

@RickRoxwell Год назад

What foams are you running in that

@juliosantiago7735 2 года назад

✌🏼😜💪

@justinvess9667 4 месяца назад

Do you think the 2700kv is better then the 2100

@chrisevans3051 2 года назад

How often you break stock driveshafts? On the fence about switching to aftermarket

@ExocagedRC 2 года назад

I havent, but I do have new Vitavon shafts in stock, email me at Exocagrdrc@yahoo.com if you're interested.

@geoffreyhudson2975 Год назад

How much did the whole build in parts cost

@THEBILLYCLAUS 2 года назад

Where is the parts list he mentioned

@sgtcrusher66 Год назад

have you ever tried the bang good axles ? or treal ?

@ExocagedRC 11 месяцев назад

yeah Treal makes good stuff, I won't mess with bangood ever again..

@darthbaker820 2 года назад

Going to build my rigs the same way. How much do you estimate is in this rig?

@ExocagedRC 2 года назад

I’d guess around 3k. I have a bunch of Vitavon in stock right now.

@justinhopkins2203 Год назад

He could probably build a stock ryft with all the parts you replaced

@rc-daily 2 года назад

This is pretty close to my build

@ExocagedRC 2 года назад

This thing will be epic!!

@mikep.9338 2 года назад

Is that lithium grease?

@ExocagedRC 2 года назад

Yeah

@chrisryder4709 2 года назад

USD STICKIES ,,,. EEEEEYAAAAAEEEEE. !! I LOVE MY STICKIES I GOT MOST OF THAT STUFF ON MY RYFT , tires make the whole thing make sense 🤣

@faubertshawn6319 2 года назад

Where did you get you usd sticky???

@ExocagedRC 2 года назад

Gotta watch their site and stay up to date on there fb page and get em when you can.

@endosrc 2 года назад

Can u do this to an smt10 I need a part guide

@ExocagedRC 2 года назад

Well you can put ryft axles into an smt 10. Then you’ll be working with Vanquish for the links and the chassis stuff can be whatever you want.

@endosrc 2 года назад

@@ExocagedRC I thought ryft link locations didn’t line up

@endosrc 2 года назад

@@ExocagedRC would a treal ryft axle fit on a freestyle rc zrd cage

@whistlinlipo 2 года назад

Dang, what’s left of the original Ryft lol

@ExocagedRC 2 года назад

Some gears and the cage. 😂😂

@geoffreyhudson2975 Год назад

And what is left of factory parts lol

@hotheadedfilmshhf6734 2 года назад

At this point just buy the parts and electronics cause you replaced the whole bouncer😂😂

@Livlifetaistdeth 2 года назад

Ballpark the total cost so I know how much plasma I have to sell to build that bad boy.

@cheagle464 2 года назад

Sell a leg, you should have enough.

@silentjde 2 года назад

I guess there’s no point in buying a Rfyt Id you plan on a build like this, just get the cage.

@ExocagedRC 2 года назад

Well the kit would work. The small parts can make builds like this a pain when you don’t have them.

@rolandomota6382 2 года назад

😶😒 broke, then seeing this vid

@ExocagedRC 2 года назад

Being broke sucks. But yeah this was not a cheap build at all.

@rolandomota6382 2 года назад

@@ExocagedRC i want to do this to both of mine but keep one rock bouncer style, and get the kit as well 😎

@stevenpeters2593 2 года назад

Who cares about those damn weight scale

@ExocagedRC 2 года назад

It’s cool for tech and tuning.

@beleg1437 2 года назад

Shit video for you not telling us what the Holmes motor is!

@ExocagedRC 2 года назад

You know what’s even worse? You not looking at the description to see what it is before posting a stupid comment. That’s what’s worse.