Ultimate Suppressed 10mm??? 

Thanks for the Hi Point 10. I’m a big fan of theirs. Just bought the 45 woodland camo. Great weapon for the price. It may be bulky but I’ve never had a problem with any of mine. Love the videos.

The only reason i like hearin a round or two in the dirt is bc it gives a better comparison for the sound reduction if the steel isnt ringing.the difference between supers and subs while shooting steel is hard for some of us watchin to tell very well. I thank ya for obliging us folks with some in the dirt

Badass rig. Actually the Hipoint is a really good fit, any other pistol would have looked silly in front of that massive can. Hand load some 200 grain XTPs, super quiet with 490 ft-lb - scary

I had no idea I needed to see this combination. Awesome vid Whooootie

Man that's a whole lotta slappin power out of less noise then my 22 running calibri rounds.

Subsonic and sonic 25ft clay blocks would interesting to see how they would react with clay.

Great video. Very impressed with the way the can tamed the recoil of the hot hollow points. The Hi Point ran much better than I thought it would. My only exposure to the HP was a friends old 45 ACP unit. It simply could not chamber a hollow point. Looks like things have improved. None of my 10MMs have a threaded barrel. I may have to fix that. Looks like I’m missing out on some real fun.

I'm with you, the ring of the steel is cool. Hopefully Hi-Point makes the carbine to match. Another awesome video WTW 👍

You went and did it! You madman! This'd be awesome on the 1095 in the Hightower armory bullpup stock. Real space gun, that.

With Hi-point handguns , you have to hold the grip tight or the slide will not cycle all the way back. It needs every bit of blowback to cycle , too much recoil on barrel rise and this will happen.

Some times I sing to my wife the Pink Floyd song, “Your lips move but I can’t hear what you’re saying “. 😂

nice 😊 keep up the great vids

Before you even tried to run the Hornady HTP's, I knew it would feed no problem. Many times when having rounds getting stuck on the feed ramps, a conical bullet will fix the issue. Thanks WTW!

Nice shooting WTW, enjoyed watching!

Looks neat! 👍

Love my G40 and Hybrid 46. Most 200gr stuff is subsonic with my 6.6" Lone Wolf barrel.

Looks like your can is really taking the muzzle flip right out of that.

Great video brother. Love your sense of humor too😂

Putting bullets in the dirt... this reminded me of something from the early, early days of gun videos on RU-vid. Back then, the gun safety nazis were really bad. It's like they watched videos just for the sake of looking for something to complain about.... because that's how you show you're the greatest gun guy on the Internet! They'd jump all over a creator because they didn't show, on camera, that they cleared the gun. "Hey, you didn't clear your gun! You're unsafe!" They'd complain anytime an empty, cleared gun was pointed at the camera. "Hey, you never point your gun at something you aren't trying to destroy! Are you trying to destroy your camera?" Of course, I, being a perpetual smartass machine, would have to make fun of this. When someone would point a gun at the ground, I'd jump in. "Hey, you pointed your gun at the ground! What are you trying to do, destroy the planet?!?" The gun safety nazis were not amused. But screw them.

This is the first time i considered for even a fraction of a second of adding a hi point to the collection

That's really Quite. Nice

Awesome as always...

Enjoyed this one!!

Thanks, I have a 10mm on order as well as the carbine. I've got an HUXWRX RAD 45 can in jail that I'll try with this Hi-Point. I'd like to see gel tests with sonic and subsonic 10mm. Thanks for also running the supersonic rounds.

Well now this was a interesting video and I am a huge fan of suppressors. I I own a banish 30, silencer Co 30 cal and a black rain 22 LR suppressor. I really like my suppressors, but I don't like cleaning them. In my opinion, silencer Central makes a better suppressor than silencer co. The one thing I really don't like about my 30 cal silencer Co suppressor is that you can't disassemble it and so there's no way to clean the carbon out of it. After a while it gets so carboned up that it's not near as effective. However, I have sent it back once to silencer Co. And they took it apart and replaced the battles at no charge.

I own 6 hi-points. Any reliability issue has always been the fault of the magazines. For example, the lips are easily bent.

I've been thinking of the carbine version in 10/40 , looked other day but a LGS only had 9mm, so I still looking ..

Thanks again for your video

Awesome! I want one!

WOW quiet! Amazing

Howdy WTW! SHUSHED WAS SWEET! HI POINT ARE NOT THE PRETTIEST BUT THEY RUN LIKE A TANK. THX SIR.

Impressive 👍 The doctor said I have trouble hearing hi pitch tones so I told my wife I have a doctor's excuse 😂

Kool vid !

Ive got 2 of the 10mm carbines. By the end of the week ill have the jxp! Went NTB because i dont asee a shusher in my future. Will make a great truck gun, camp gun, tractor gun (once snake shot is available).

Just picked 1 up yesterday and you were right it was hard to get the 9th and 10th rds into the mag but they fit

Dude that is super 😅quite looks so sweeeet with that can on it awesome Dude love it

Subsonic with the can is awesome 👌

I just ran 250 rds. Through mine..Blazer Brass....S&B and SIG V crown Hollow Points with 0 issues...she is a keeper fun Gun glad I bought it!😊

That's awesome on a High point awesome again.

Dang that thing is a beast. Love me some Hi Points!!!!!!

I've been seeing a lot of these Hipoint 10 vids I might pick one up. Surprisingly quiet

I would love to see a side by side comparison of the pistol to the carbine from hipoint both in the 10mm caliber.

Well where do you think the spent round ends up after hitting the metal targets

Sweet great price also.

Awesome! Also I did not know you can shoot a 40 S&W in a 10 mm.

Nice song at the end. I recognize that voice 😄

Love them points

Im getting the glock 20 gen 5 10mm next for a walk in the woods pistola 💪

Looks fun my man. I’m waiting for my Omega 300 can to get out of jail. A few more months and I’ll be united with it!

Very cool! Like ringing a bell.

What about trying full power loads through the can to see what they sound like

Hi from Scotland. Unfortunately we aren't allowed things like this. We could have a 50BMG rifle if we have a club to shoot it at but a suppressed pistol is off the cards no matter what. Looks like fun.

Neat setup

Brother, what did you buy for the .578x28 thread pitch HUB?

Very cool🤘

I feel ya on the hearing, I can hear really well but all it sounds like is hiiiiissssssssss

Looking at the end shot with the slide open it looks like they fixed it usually it's hard to keep the slide back that far

People wanna put down Hi Point but they're guaranteed for life 🎯 Even TRANSFERRED💥 COOL & Quiet video💥💥💥👍

Pretty neat. God Bless You And Family Amen

Awesome!!!

Awesome.... You just put a bunch of questions to bed . Thanks

If you are doing direct thread mount versus a piston, that can cause feed/cycling issues with a can.

Polish the feed ramp just pull the slide back all the way you'll see a pin drive it from the side of the safety. Put it back in the opposite way and it will come off lift from the rear slide forward and pull it off the barrel use some flitz and polish it

“So we can hear the steal go dinngg.” I love this.

Pretty cool 😎 👌 👍

Soon as hipoint starts selling just the barrel will be amazing. But think about how amazing this will be for some good Tennessee hunting

Interesting. I have never heard a suppressed 10mm. I wonder how the flat point would do in gel?

Greets from Germany 🤜🏻🤛🏻

Whoteewho, you can make even a Hi Point look good.

Hello I have a glock 40 long slide want to suppress it. What kind of ammo are you using and looking for a threaded barrel

thanks for sharing. Do some hunting with it.

I gotta see this can on the 35 whelen, I love my 35 just a bit too loud

10mmgreat for those damn critters yah ! High point 10mm

I wanna get one for a woods gun I don’t worry about scraping up or banging around. Probably not suppressed since I’d be so worried about messing up the can.

Bang bang, shoot that thang. Nice. 10mm ammo prices? Love your vids. Thanks for the info, good video as usual.

i gotta get one of them

I believe you're voice is louder than the subs.

ı love suppressor and 10 mm thats really good video

nice BING BANG!

Good selling point 👍

Hi point already sounded like airsoft, damn!

I was amazed at how quiet that was

I want to know more about that yellow target.

I had two hi-points.. a 45 and a 380, both were pretty decent considering that they're "the poor mans gun" but I loved them. I'll have to invest in a 10mm to keep the others company

hi point 10mm very good gun nice shot nice

Also, did you need a piston on the can for the JXP10 or just a direct connect? Thanks

I see a whitetail hunt with that setup next season. That would be sweet!

Great job hank keep shooting please love it truly more love from 205 pisces black alpha male Birmingham Alabama home of the Civil rights moment roll tide roll

I wish I could get a can for the end of my Beretta A400s. It would really help the dogs a lot. Great video WTW!!!

Polish the feed ramp. That would take that problem away. The older models you had to do that because of bur marks or the finish.

Can you please do a video with a Sound Level Meter to measure the decibel reading between open barrel and suppressed? Your videos are excellent, btw.😊

nice

That looks awesome, Quiet. What about a deer hunt this fall.

Nice 👍

still love your vids.

I for one like the ring they send with them

Man, I'd be happy to have one of these!

I would have one on order if Pickster didn't ban everything fun in Illinois....

Throw that Banish 460 on that CMMG 458 Socom! That would be interesting to see.

Hey great video some people can only afford a hi point for home defense and i think they are American made