Ultimate Welding Table / Workbench with Awesome Clamping Options

Подписаться 1,2 млн

Просмотров 1 млн

50% 1

My Premier Project Plans: paskmakes.com/premier-project...
My Free Plans: paskmakes.com/free-plans/
I've needed a decent welding table/workbench for some time. I've always managed the best I could with what I had but this is going to make work much easier and more accurate too. I've not seen anyone fill the gaps in on a welding table before but it made sense to me as I'll probably be using this as a general workbench 75% of the time.
A big thanks to Jason from Fireball Tools for his tips, which were extremely helpful! You can view his video here • How to Weld Without a ...
I bought the steel from steel-mart.com
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.threadless.com
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia

Хобби

Опубликовано:

24 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,1 тыс.

@theajthomas 3 года назад

That table is a thing of beauty. I don't even weld and I was still drooling over it. Fantastic design and work!

@PaskMakes 3 года назад

Thanks very much - I was thinking it would make a cool dining table or desk but obviously with much thinner steel. :)

@goldenghostinc 3 года назад

@@PaskMakes I love centimeter of this thing. It's a work of beauty that I would be proud to have in my house. Not sure at all if thinner steel would improve upon that :)

@robertharris1748 3 года назад

It's the attention to detail that makes these builds and videos so amazing! Going back and putting extra tape on each bar rather than fudging it. Keeping the sides square, grinding the weld/installing screws replacing with rubber stops so the spacers sit exactly right. Not to mention thinking about the fact the rubber should go on the bar not the table. Then removing the mill scale, waxing it etc ... Amazing!

@cwaldrip 3 года назад

That string check was cool.

@isbcornbinder 3 года назад

Never boring.

@digisports22 3 года назад

There is something about waking up on a Sunday morning with a cup of coffee and watching this genius of a guy work on metal.

@ildefonsogiron4034 3 года назад

It's better that, after a coup of coffee and this video, you finally find inspiration to start that project you've been delaying for some time. So, heading to the shop. Regards.

@myharris 3 года назад

'...watching this genius of a guy work on *anything*'. There, fixed it for ya! 😂

@mikepaul136 3 года назад

Well said!

@digisports22 3 года назад

@@myharris Thanks for clearing that up for me.

@plazmotech5969 3 года назад

exactly what I just did!

@Yackhammer75 3 года назад

I think that is one of the nicest and well thought out welding tables I've ever seen.

@Kelvinkid100 3 года назад

You have definitely have given me a lot to think about when I will be ready to build a bench. I especially love the removable thin bars that you put in between the plates and your stops that are movable around the outside of the bench.

@GablesDude 3 года назад

Beautifully done. My son and I started watching your scrap wood challenge videos a couple years ago and now we're enjoying watching you learn new things. Keep up the good work!

@RaptureMan66 3 года назад

Really love the humble pride that shows in your smile when you look at your finished table. I can tell you're pleased with how your project turned out, and rightly so. Job well done!

@PaskMakes 3 года назад

Thanks very much - I must say that I am pretty pleased with it! :)

@georgecunningham9175 3 года назад

brilliant mate! from inception to design, to execution, absolutely brilliant! its more than heartening to see a craftsman find and implement a solution to a problem, small or large, instead of "making do". so many just let it go half-arsed and live with it, using the initial flaws as excuses for substandard results.

@snackslack9773 2 года назад

You are an absolute legend sir Pask, you manage to entertain me in most of your videos and that means you have done it to other viewers as well. You work meticulously and I am sure metal works is just a piece of cake to you. Keep up the good work!

@bigpete4227 3 года назад

Your work ethic inspires me to be more precise and do more planning in my own workshop. I’m not and I never do but I’m inspired none the less.

@R.Craig.Collins 3 года назад

Thanks for this wonderful distraction... can't wait for part 2. And thanks for owning up to mistakes... it is always interesting to see how you recover and I love your problem solving idea...they always lead to a great final product

@wficklin 3 года назад

It's looking really good. Everytime I wear shorts when welding I send a spark down a shoe. Fireball makes great tools and videos.

@gianpreisner 3 года назад

Man, this is a work of art! For me that only have basic steelworking tools this looks so much more achievable! I loved the video!

@ph1643 3 года назад

I love that you are obviously also getting carried away, when doing a project - and then realizing that the plan was different. Great to see all the turns you take - makes it much more authentic than skipping the "mistakes"...

@mrspygone 3 года назад

Every time I watch your videos I get the same enjoyable experience. I feel deeply impressed by your craftsmanship, your diligence and wide-ranging knowledge. With the best wishes for you and your upcoming projects, I will look forward to your future videos. Thanks for sharing. 👍

@yeoh-inkanimations2741 3 года назад

I really like watching you work, your voice is very calming, and the fact that you allow the woodwork noises to make it sound natural

@vikassm 3 года назад

I was going to say the exact same thing!

@PaskMakes 3 года назад

Thanks very much - glad you're enjoying the videos. :)

@Cptnbond Год назад

Congrats, the best DIY welding table I have seen on YT. Cheers.

@nicktoland2863 3 года назад

Everytime I watch your videos, it reminds me that I miss living in Banyo/ Brisbane. Australia is an amazing country!!

@geoffcapper5025 3 года назад

You're going to get years of service out of that one, great design and build! Thanks for sharing it.

@LogHouseFarm 3 года назад

Nothing like cutting your freshly welded piece apart - one thing I have learned watching youtube, we all make mistakes. Even Pask Makes Mistakes :-)

@travwilson7827 3 года назад

Pask, I have thought of building a welding table but my ideas were just over complicated. This is so clear and functional and so elegant (in terms of design). I really appreciate your work. Thank you.

@nenaelliott8058 3 года назад

That, sir, is the king of work benches. Well done. Beautiful work. Thanks for sharing.

@ga5743 3 года назад

Loved the “beauty shot” of the pups.......oh and your table came out awesome too. Well done my friend.

@PaskMakes 3 года назад

I don't think they've been in a video for a while so thought they needed to make an appearance. :)

@MJ-nb1qn 3 года назад

@@PaskMakes - Yes Loved the Pups!

@TokyoCraftsman 3 года назад

I think that Jason at Fireball Tools would approve! Well done that welding table would have a place in any decent fab shop for sure! Your versatility in making stuff always impresses. Cheers from Tokyo! Stu

@PaskMakes 3 года назад

I hope so Stu! Thanks very much! :)

@TAZTHEPOSTMAN 3 года назад

The one thing i truly like is you actually show your mistake's most other You Tuber's never do.That is why i love watching you video's because when i cock something up i think to myself HEY even the pro's mess up....Can't wait for the next video..Stay Safe..love from Nottingham England

@hdzcustoms4029 3 года назад

Great job, I normally wouldn’t watch a 19 min video of someone building a welding table but your attention to detail made me watch the whole thing.

@fiddyb 3 года назад

lol, even threw in a pair of bench dogs at the end

@bergstromdrew 3 года назад

Nice work as usual! I love watching Jason from fireball tools...he does some excellent fabrication videos and that water jet is crazy. Glad you found him :)

@PaskMakes 3 года назад

Thanks! I've only watched a few of his videos but really enjoyed them and will definitely watch more! :)

@pencilandpaint 3 года назад

Thanks for showing when you make errors. It's nice to see that errors will happen, and are not the end of projects. Love your videos.

@lunkydog 3 года назад

Nice to see both of your little helpers again. The bench is very well thought out. Nice job.

@dr.skipkazarian5556 3 года назад

While I was in college, I worked summers at an industrial plant (FMC) and became familiar with both welding techniques and tools. I just want to comment that your design, fabrication, and versatility of this table is extraordinary. The absolute utility and finish are exceptional. Best to you and the family, give the pups a hug, and be healthy.

@PaskMakes 3 года назад

Thanks very much! :)

@OriginalMomo 3 года назад

Beautiful work! That’s a beast of a table.

@thndrgrrrl 3 года назад

I love watching your videos, and I love how you arent afraid to admit you are human and make mistakes like the rest of us. It takes the pressure off, to know I can something new and not do it right the first time.

@toptiger3755 3 года назад

Clear, crisp, excellent pace and production values. Just lovely. Well done.

@DuncanAitken 3 года назад

What a beautiful design and creation, Neil. One of the most aesthetically pleasing welding tables I've ever seen. I love it! Great trick with the vinegar, I must remember that one.

@Grumpyneanderthal 3 года назад

I need to make a sign in my shop “ Chill Dude, Neil makes mistakes also”. Great design as always Neil!! Welding was spot on also.

@PaskMakes 3 года назад

Thanks mate! I make plenty of mistakes, I'm sure we all do. Not sure the welding was spot on but I reckon it's good enough. ;)

@Fotowoltaika-Hobby 3 года назад

I thought the same. :-)

@homemurso1484 3 года назад

You gain my total admiration and respect, sir. Not only for your admirable skills and abilities, but also for your honesty and integrity displayed here. You owned your mistakes with great humility and respect for your viewers and supporters, and that something really appreciated, my good sir. Thank you for your exemplary professionalism.

@davidbaker2859 3 года назад

That is a bench to be proud of Neil. Well thought through & every step done to perfection. Enjoy it mate.

@faamp 3 года назад

This was a very satisfying build to watch.

@stavros_katsopr 3 года назад

Another, classic, OVERKILL by Neil. Nothing new mates, just a solid, lifetime guaranteed construction for the generations to come... Cheers and many many beers for many many years mate!

@lulirosset 3 года назад

Excellent approach, Neil! I love the way you solved the clamping space with the removable spacers and the stops. Well done! Thanks for sharing the process.

@PaskMakes 3 года назад

Thanks very much Luli! :)

@danielww9022 3 года назад

Hands down the best welding table I've ever seen. I have seen a lot. Great work.

@forestlampcraft472 3 года назад

Cool!!!

@user-sc7zr6ly1y 3 года назад

ใ. .ใใ..ใ....ใ

@muzamilpathan748 3 года назад

Bfj

@totallyjonesin 3 года назад

Here is one of my favorite welding table vids. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JQbq-ID7g7Y.html

@ScottTurnerformeindustrious 3 года назад

That's an excellent, well thought out table. Well done Neil, oh and hey that shirt looks good too :) Thanks mate.

@PaskMakes 3 года назад

Thanks mate and thanks for the shirt, Love it! :)

@gregnorvell9730 3 года назад

The 2 of you should collaborate a project together and donate or sell it or whatever......?

@robertodebeers2551 3 года назад

Really a well-thought-out project that finished up nicely and will provide years of good service. Well done!!

@Thunderbuns-il8ri 3 года назад

This table is a thing of beauty! You did one hell of a great job Sir!

@Makebuildmodify 3 года назад

That's a great design Neil!

@PaskMakes 3 года назад

Thanks Justin! Glad you like it mate! :)

@juliestafford2123 3 года назад

@@PaskMakes 0

@joelmiller3333 3 года назад

@@PaskMakesesx 3

@kingpin76110 3 года назад

@@PaskMakes did you ever make any plans or cultists for the ultimate welding table? I would like to copy it if you didn’t mind. Thank you.

@ciscogsx1000 3 года назад

First off, great video. As a helpful idea. When your tacking any square together try just tacking the inner edges together first. This method in conjunction with your gaps between your pieces will allow you to measure, squeeze, and pull the cross ends together and apart to make everything nice and square. Then when you tack the outer edges it will lock everything into place. That's how we trued up the ladder skids I built for a pump company. You can pull your measurement cross ways then use a ratchet strap for big stuff or push it on end against a wall until both measurements are the same then tack the outside and check for twist like you did. Hope that helps.

@serdiefgotreb 7 месяцев назад

It's actually the complete opposite. You always must try to tack the outer sides, it's easier to push inwards that to pull outwards

@johnlanham9057 3 года назад

Epic !!! That’s one of the best welding tables I’ve ever seen. Strong work !!! 👍🏻👍🏻

@burakozdamar 3 года назад

Your attention to details are remarkable. Very well thought work from start to finish. Congrats.

@cowcow91120 Год назад

As an amateur with woodworker, i typically feel overpowered with the entire arrangement ru-vid.comUgkxrYREG3-7f1Aqk9ams3ZESRNzGnfdUtyQ . Be that as it may, this arrangements drove me through with much clarity and effortlessness woodplans. Works i now work like a genius. That is great!

@spinyuk 3 года назад

I have to admit, I watched all the way through and wondered why you were doing the slats, when it would be easier to just weld a big bit of plate on the top, then you showed the clamp part and I literally said out loud "i'm an idiot" - excellent work as ever :D

@JDeWittDIY 3 года назад

Another method people use is a solid top with holes drilled and special clamps for the holes. But with the slat method, there's no holes until you remove the slats.

@jeffjackson2871 3 года назад

Love watching your videos. They are the best out there. You don't just make, you teach while you do it and that is impressive.

@mitziseyfferdt3866 3 года назад

Brilliant thanks Neill, shared it with my brother and hubby. Love the pups, they are so cute

@torbjornahman 3 года назад

Very nice! Wonder if I could make room for something like that!? Space is limited...

@j.markkrzystofiak9907 3 года назад

I see old milk crates are just as handy on the other side of the world too!

@TheAefril 2 года назад

Who says they have to be old, I have about 12 of them around the yard. I use them for scaffold, stools, temporary ladder, welding props, formwork support and chairs. I use milk crates for just about any temporary furniture or stand inside the house, garage, and around the yard. They are modular and give you a new level of 320mm above the floor, so handy.

@owenparker6651 3 года назад

I'm not sure why, but I am always surprised when I hear a youtuber say they saw something on another youtuber channel I follow. I hold Fireball Tool's work and design skills in very high regard, much as I do yours. Thanks for sharing...

@Tylerxburns 3 года назад

you're like the Bob Ross of making. love watching you work!

@oldowl4290 Год назад

I have the Fireball Tools squares and can say I find the "3 point" method much more simplified and easier. 3x of 2" angle iron with a square tube clamped across the top works great. The custom squares come in handy here and there but have found that they stay in my tool drawer a lot. They are indeed good for welding upright legs in corners though, but with a little work you can make your own squares out of tube as well. I also want to give a word of caution. If you are going to be welding anything for more than 20-30 minutes, never wear shorts or short sleeves. In fact I never recommend shorts at all, ever. It's far too easy to get UV burn and weld spatter in your shoes or boots. Long pants..always. Lastly, I see no reason to have the filler bars at all. And to remove mill scale, the best answer is pre-soak in muriatic acid for 30 min to 1 hour, then immediately after that, dip for another 30 min in phosphoric acid, otherwise the steel flash rusts. Phosphoric gives a rust prevention coat. Vinegar really does nothing except oxidizes and rusts. It's often used in a mix to patina metal for a rust look.

@ronstallings3156 3 года назад

"Can't even follow my own plans" I AM NOT ALONE after all !!!!!!!

@benjamminbrown 3 года назад

This is one of the coolest pieces you've ever made. Very impressive!

@wint3rsmith42 3 года назад

Great video again Neil. Nice to hear Jason at fireball getting a mention, I have one of his squares and its a massive help with frames like this. well worth buying.

@PaskMakes 3 года назад

Thanks mate and great to hear your thoughts on the Fireball square! :)

@studying5780 3 года назад

That table makes me feel things that my wife hasn't made me feel in years.

@juancarlosricarti7215 3 года назад

Jjjjjj maybe you need a blond neighor table to "weld" jjjj only a joke (mmm...)

@ironhead65 3 года назад

Being in a similar wet environment, I would love to know how the wax on the table top works out. How often you have to reapply it, effectivness, level of effort, would you do it again, etc. Great build!

@PaskMakes 3 года назад

Yes it will be interesting to see. I think whatever finish goes on, there has to be a degree of maintenance. :)

@Gottenhimfella 3 года назад

@@PaskMakes I'm sure it will help with preventing spatter from adhering, especially if it's reapplied regularly

@WillBlackArt 3 года назад

I really like this video. I just started metal working at the beginning of Covid and have been interested in building a table like this. I was happy to see that you made a metal working video!

@charlvanniekerk8009 3 года назад

You can always trust him to make the most ingenious and high quality tools and in this case a welding table!! I one day hope to be as clever, talented and as good a man as you are!

@PaskMakes 3 года назад

Thanks very much - glad you liked it! :)

@thebates7217 3 года назад

I’d love to mimic your table with exactness. Would you share all the dimensions?

@bobshreve5933 3 года назад

just search for "FOOTMASTER Plate Casters" on amazon

@NotYourIngenue 3 года назад

Thank you! I was specifically digging into the comments to see if anyone had answered what those casters were. I think I need some.

@iteerrex8166 3 года назад

Yet another great use of the 3 point principal. Thanks for showing it. GREAT table!!!

@boneman1868 3 года назад

Beautiful table, and well thought out. Good to see your welding is really coming on. Thanks for the video.

@vinnyramundo2047 3 года назад

I want that work bench. The blue with the bare metal looks amazing. Good job

@Rouverius 3 года назад

Can't wait to see what you do with it. Those removable slats are seriously clever.

@thepleyadian6559 3 года назад

Your work is incredible, and you too Neil!

@skitzochik 3 года назад

you should feel very proud of that work platform, its gorgeous!

@drumcdoo9050 Год назад

Fantastic job Neil.... Just making a workshop and this will be a superb addition to fabricate. Will also add a plywood sheet with 4" x 1" edges so it drops over and fits snugly onto steel top. It will then double up for wood work and other task keeping projects free from metal grime.

@lonewolfdesignsbylarry 3 года назад

They say to give great compliment just repeat what they have done... needless to say I will do my best to repeat your table. I really like it. I am going add a knock out area for my 2x72 sander on one corner.

@petergaiser4213 3 года назад

Brilliant workmanship, as is all your work I've seen. Bravo.

@WikeedOne 3 года назад

Simply said: amazing! Keep on doing this videos and products, entertaining and creative. Thank you!

@evankelly5838 3 года назад

Awesome work man. I’ve seen a lot of these videos but yours seems like one I would actually consider making for my shop. Great video!

@rebecca5837 3 года назад

honestly, this is beautiful enough to put inside the house! ... amazing job.

@m3chanist 3 года назад

It's beautiful. I have set of those Blickle casters on my mill table, they are indeed the business.

@joshharroun2004 2 года назад

I love your channel. You make everything with thought, precision and care.

@warrenmaker798 Год назад

You look very happy with yourself. and rightly so. Very nice job mate. You have inspired me to go build one for myself. I love the simplicity of your F clamp idea. I was SOOOOO dreading drilling 200 holes, LOL

@SchysCraftCo. 3 года назад

Very nice and simple design for a welding table. Keep up the great craftsmanship and hard work. Can't wait to see next video.

@radoslavtomov9121 Год назад

Very nice and DIY-friendly design. I also don't have enough space to have multiple tables and will have to stick with 1 for all my projects. This has given me good ideas.

@michaelharmer9040 3 года назад

Congrats on the new table, and great design! What a gamechanger!

@didierlemaitre5961 3 года назад

Your work should be shown in France where only intellectual work is seen as good, working with one's hands is considered by most of our thick teachers as degrading. You achieve great things. Congratulations from the Champagne country in France & big thumbs up!

@VeradonaRestoration 3 года назад

Wow, very, very good job ! Thanks, Radek

@KL0900 3 года назад

Love ya work man, great seeing an Aussie creator using materials and tools we can get from the big green shed and other local shops

@PaskMakes 3 года назад

Thanks Ken! :)

@CondredgeDole 3 года назад

That table is so awesome!! Totally a worthwhile investment of time and money for that beauty. Can't wait to see what you make on it :)

@dennislyons3095 3 года назад

I finally got the correct way to designate those casters & was able to order a set. Thank you for sharing your table. I will likely make a similar one.

@jake-hy2zb Год назад

Beautiful work, Sir. I will need to watch again for all of your ideas.

@Craftlngo 3 года назад

this is an excellent welding Table Neil! Not even the purchasable welding tables are so well thought-out.

@scottherr642 3 года назад

Best table build I've seen yet. Nice work.

@accountshanahan 3 года назад

Given the complexity of some of your projects it's nice to see your human and not immune to balls ups like the rest of us! Great vid

@ChristopherSalisburySalz 3 года назад

I really like the table! I'm excited for more metal working on your channel.

@murpheylives3968 3 года назад

Awesome Build. I can't wait to see the Pasks you'll Make with it!

@petermarsh4993 Год назад

Dear Neil, you’ve done it again. You’ve taken a much hackneyed solution and added some truly unique embellishments to make a beautiful welding table. Your project couldn’t have come along at a better time. I’ve just taken possession of my new welder and cut-off saw. My next need was a functional welding table. I intend, with your permission to use some of your design elements in my table. In the past I did purchase a couple of sets of the plasma-cut template squares and put them together. They were incredibly useful in fabrication. You can’t too much of a Balls of Fire! Cheers.