Umarex T4E Crimped Valve fix part2, how to identify your valves gen1-3 

it comes loose just from gassing it up in your hand as we seen in the groups multiple times, also over cranking on the allen key for the co2 cap causes the crimp in the valve to fail and blow off, umarex has now gone back to the threaded valves again now with the crimp being extra

still means it will explode after less than 12 hours of runtime.

@@earthenscience I think if it was a serious problem, a lot more people would come forward. Umarex would also be obliged to start a recall campaign.

@@mario_theOne a lot of people already said theirs exploded. and we live in a cyberpunk society of capitalism, a recall would mean less profits so its not probably going to happen.

@@earthenscience What do you mean with „a lot“ i can‘t find a lot in the Internet. In any case, mine is still going strong and has been used for more than 12 hours 😄

sry im not sure what you mean you just drill out the restrictor to 1.5mm max or less

I was on about the crimped valve repair! But I've done it now thanks to your videos. Thanks man

see jon reynolds he has the new threaded valves that wont even pop off on you for each marker

once it comes off you need a rebuilt replacement from critical situations ask jonathan scott he can rebuild one for you www.criticalsituations.co.uk/

you mean the green oring in the co2 tube, or the valve oring?

no its green and makes the loctite cure 20 times faster, the loctite starts to harden with in the first 5 mins, i put some on a bolt and left it over night and it was still slightly wet, you must use this on any non active metals like aluminum and stainless

@@UmarexLessLethalHomeDefense thank you for everything my brother !!!

not really, if its new then it will have the crimp, but we hear now that by next year umarex is going back to the threaded valves

it has the crimped, new ones should have the threaded by now if not seek out jon reynolds he has all threaded valves for umarex markers

@@UmarexLessLethalHomeDefense ok that's scary because the risk of it poppin out of place in hand, I also dry fired tested my torpedo revolver because I'm in a place where I can't shoot amo all the time but after I shot it every once in awhile it back fires once or to more times, plus on the first test at end of gas the drum froze untill I reset it, but on second test it's still back fired some but didn't stick, are those guns garbage I don't hear good things about mercury rise some times?

keep up with the good videos I👍🏻like ur mods.

thanks man :)

ya there all pretty close in size, just shaped a lil dif lol

www.criticalsituations.co.uk/