UNBELIEVABLY CHEAP STEEL Ketch W/ An Interior That'll SHOCK YOU [Full Tour] Learning the Lines

Подписаться 134 тыс.

Просмотров 202 тыс.

50% 1

Go to buyraycon.com/ltl for 15% off your order, plus get free domestic or flat fee international shipping. Brought to you by Raycon.
"Astragale" is a Mason 33s designed by Al Mason in the late 50’s.
Professionally built in 1974 by Paul Mailloux of Mailloux Leclerc shipyard in Île-aux-Coudres, Charlevoix QC, using mild steel. Deck and hull plates are 1/8 of an inch, keel plates are 3/16 of an inch.
In 2004 ASTRAGALE was transported from Ontario to Quebec city were she underwent a complete and thorough refit.
A thorough inspection of the hull was conducted and a section of the bow, chain locker location, was replated with 3/16 of an inch by the son of M. Mailloux, who works as a professionnal ship welder.
A dog house was added, 1/8 of an inch plate, to have an inside watch area with a collapsible seat. Portholes made of lexan 3/8.
"Astragale" was back in the water in 2015 and navigated St-Lawrence river and the Maritimes.
The interior finish is to yacht standards; a great opportunity for a couple looking for a strong pocket cruiser to explore remote coves and bays.
Fully equipped for cruising with recent survey available on request.
What do you think? Let us know in the comments below.
Want help finding a cruising boat? / notabrokerconsulting
To recommend yachts for us to tour:
jordan@learningthelines.com
For media/sponsorship inquiries:
jordan@learningthelines.com
-----------------------------------------------------------------------------------------------------------------------------------------------
List Price: $39,900 CAD or approximately 29k USD.
Listing:
www.atlyachts.com/boats-for-s...
-----------------------------------------------------------------------------------------------------------------------------------------------
Not-A-Broker Consulting: / notabrokerconsulting
Facebook: / learningthelines
Instagram: / learningthelines
TikTok: / learningthelines

Опубликовано:

11 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 196

@LearningtheLines 11 месяцев назад

Go to buyraycon.com/ltl for 15% off your order, plus get free domestic or flat fee international shipping. Brought to you by Raycon.

@JohnBobRoger 11 месяцев назад

This boat was in Midland Ontario (Georgian Bay) back 20 years ago. A Canadian Air-Force retiree had her...I could have bought her( listed for 33k).Some skipper from Quebec bought her..I was aboard her...new interior looks great....this boat is very robust..

@mountainmandale1587 4 месяца назад

That says a lot!

@sanfranciscobay 11 месяцев назад

Nice job on the interior with the light colored wood. Makes it appear spacious.

@Mach11976 11 месяцев назад

Wow, what a great re-fit. Very cool brother keep them coming.

@Seafariireland 11 месяцев назад

Nice practical sturdy ketch!

@philipfreeman72 7 месяцев назад

Love the light interior .

@maidengems304 11 месяцев назад

WOW! That is a gem of a boat!

@wboriginals 3 месяца назад

Truly some wonderful work was put inter her. Nice!!!

@emilybh6255 11 месяцев назад

Regarding the fold down bench. "You just aren't seeing it." The reason there is a hinge at the bottom of the leg or support piece is so it can fold up and rest on the ledge made for that purpose which protrudes out from the end of the settee that the red pillow is resting against. The ledge is the exact depth as the distance from the hinge to the end of the bench support (leg). I bet you anything, that is what it is for. You can see what I'm talking about at 9:43 in the video.

@glenndavis479 11 месяцев назад

The real question is...would you sit on it at anchor or while at sea , it looks flimsy at best.

@edmiller1012 11 месяцев назад

I’m the owner and it is not flimsy. Sitting out of the weather you have a 360 view around the boat and a good view of the GPS/Chartplotter/MMOS/Radar which swings out on a hinge.

@virginiai.3632 11 месяцев назад

Doesn't look at all flimsy to me - just opposite.

@DavidWing 11 месяцев назад

@@edmiller1012 beautiful job on the woodwork and joinery!

@sonofneptunesailing917 6 месяцев назад

WOW! I love this! I grew up with steel boats. I think it would be so amazing to have a steel sailboat!!! I love the woodwork and cabin design. I am not sure about no having a quarter berth??? I think you did a really good job showing this boat! If I was in the market for another sailboat I would want this boat! This gives me some good ideas to upgrade the interior of my S2 8.5. Thanks for the video!!!

@TheRealChetManley 11 месяцев назад

nice! I hope to find something like this in about 7 yrs.

@christianmittendorf6623 2 месяца назад

This boat is a dreamers reality, she's all you want and need and then some for a couple or single handed. What a great condition she's in, fantastic! If one seeks for a solid little yacht to go anywhere, and got the money, there's no reason to hesitate but to go and snap it.

@iannmiller 11 месяцев назад

Sweet mini ketch

@kosiekoos9408 9 месяцев назад

Wow those Mason lines are crazy beau❤itiful

@foreverendeavors6210 11 месяцев назад

I like this one!

@rbnhood39 11 месяцев назад

Jordan have you chosen an electrical system for your van yet? Eco Flow is an incredible system. I just watched a van build out using it @ Drifter Vans. While it’s not cheap it really solves all of your electrical needs. I’m not affiliated with them at all but I was thoroughly impressed with their quality.

@tombremer514 6 месяцев назад

Wow. Great tour. Well maintained for sure. At the price point it is wonderful boat. If I was in the market right now I would jump on it. Wow. Thanks. I am building a house in Thailand right now. But in the future. who knows.

@baltimoreravens1515 11 месяцев назад

Love that boat

@rtbinc2273 11 месяцев назад

This is the second Mason you've toured. The other was a 64' built by Pacific Asian Enterprises - the Nordhavn people. PAE also had a Mason 33 but it seems to be a different boat and design.

@fazzaz31 10 месяцев назад

These American-designed, made in Taiwan Masons are the boats that made Nordhavn famous.

@scottgenius9189 11 месяцев назад

Pretty Neat ,good refit built like a Sherman Tank

@heiner71 11 месяцев назад

That's a great boat for a couple.

@4stringb 11 месяцев назад

Awesome ❤

@Lord.Kiltridge 11 месяцев назад

Sweet ride. If I had the chops and a partner, this would be right on the money. Hello Vietnam.

@fredread9216 11 месяцев назад

Nice little boat. Looks very strong, if the entire boat is steel, hull, deck and house/dog house. Love the La Vac head and very nice engine and compartment. For northern cruising the diesel stove/heater is nice. Didn’t see the tankage?? And conveniently the displacement was not shown by you or the broker. Long overhangs and short waterline combined with the mass of steel in such a small boat would make her very very slow.

@mikemendes7598 11 месяцев назад

Yeah, I thought it was funny/convnient that the displacement wasn't listed. It would probably put people off!

@asailboatnamedroxy696 11 месяцев назад

Very cool 😎

@douglundy5755 4 месяца назад

Yep, great boat for great price, with the one issue of the wavy topsides that appear to be dented or wrinkled. No great flaw but for this nice boat to be dented..It would be worth fairing and painting so its straight.

@rolfsvensson5777 5 месяцев назад

It is this thing with rust! Slow but in general a good boat!

@PsychonautFPV 4 месяца назад

Very nice boot❤

@thomasandreas867 7 месяцев назад

A beautiful Dreamboat.

@JFonFly 10 месяцев назад

I noticed a comment in thread regarding fiberglass vs. steel. Yes, steel is more work but worth it if doing any sailing in water with debris - logs (PNW), crossing shipping lanes (containers), etc. Hit something significant once with a fiberglass boat and you’ll wish you had steel. Jason. Do you know condition of steel hull? A mild steel boat of this age with 1/8” plate could be significantly degraded, particularly in typical problem spots.

@andrewallen9993 2 месяца назад

High density polyethylene boats are best. They don't dent or break, they don't rust and they don't foul. They require no maintenance. Fun times designing and welding together though. All fittings have to be screwed or welded in as you can't glue anything to them.

@ashleighelizabeth5916 3 месяца назад

Given some of the garbage I've seen for sale in the local market that's a very reasonable price for a steel boat in such good condition. You can tell she has been well loved and well maintained.

@stevepeterson5943 4 месяца назад

Very unique interior, i wonder if they do conversion vans, kinda reminds me of that look : ) I bet all that wood smells great! Nice iob. . . . I think a nail gun here and there would fix some dloor squeaks, no biggie.

@wisdomsquare28 6 месяцев назад

Beautiful boat for the money!

@chriscodrington5464 5 месяцев назад

check bilges, thru hulls, engine room, and.....maststep look underside of decks wherever visible...the topsides was painted of course. def need survey for hull thickness. if all's well great for thems who like steel.

@mattlechner8442 3 месяца назад

nice boat ,,,,

@MARiordan 4 месяца назад

I can't watch the video as I don't want to be shocked!

@nessuno1948 11 месяцев назад

Jolie boat.

@ronaldnickell6110 11 месяцев назад

Very well laid out for use of all the space. It is the epitome of every thing in its place. I'm just a little claustifobic for that size space. For those that don't have that problem it would be ideal. My ideal would be this in a 37 footer hull.

@cetterus 11 месяцев назад

33 made out of steel would barely move

@jackrichards1863 10 месяцев назад

1st reply says it would barely move because it's steel. Doesn't all that rag available to hoist into the wind mean it will be smooth and fast ? Though a bit slower accelerating.

@MrBrian8749 10 месяцев назад

She could be made fast

@cetterus 10 месяцев назад

@@MrBrian8749 I'd love to see that. 33 feet implies she's short and there is minimum 4 mm thickness of steel required for plates. That makes sense for 40+ boats. If you guys have an idea how to make her quicker/faster- I'm all ears. Maybe she could stand some heavier rigging?

@thomsbooth4906 11 месяцев назад

Talcum powder fixed the squeaks on my 150 year old hardwood floors at home. Never tried it on a boat. Might be a short term fix until you get around to finding the root cause. Just a thought.

@futurevolador3984 11 месяцев назад

Is it easy to buy it in Canada and import to USA, e.g. tax, registration? Any legal requirement difference, e.g. light, ...

@ianrusso8790 11 месяцев назад

it's gorgeous, perfect for me but I live in the UK, and I don't have enough experience to sail the atlantic yet

@Wachest 11 месяцев назад

good! because I just might take it.

@ianrusso8790 11 месяцев назад

@@Wachest it's such a sweet boat

@janmaaso 4 месяца назад

Use PTN navigation, i.e. point the nose towards the UK. You should have a hell of a story to tell when you get there. But seriously, this very much seems like a boat that will look out for you. Makes me wish I was young once again. Jan.

@mountainmandale1587 4 месяца назад

Review some vans or something.

@vincent7520 6 месяцев назад

Great! asking price?

@davidwhite6617 10 месяцев назад

This would be a nice "ketch" for someone. Would love it myself. Would sail it right away in the coves and bays of NL and the Maritimes.

@briandale8386 11 месяцев назад

Looks like a cape Dory interior

@jimmyjohnstone5878 9 месяцев назад

The ongoing maintenance would put me off that yacht.

@soloflight75 4 месяца назад

So close, yet so far away... Gorgeous boat for 40K. Obviously we'll loved. I will need just a bit more room for 4 people.

@Wachest 11 месяцев назад

I thought that was a great looking boat and the price is right.

@rtbinc2273 11 месяцев назад

It's too small for me - but best wishes this looks like a winner for someone.

@treywest268 11 месяцев назад

For $40,000 this boat is a steal!!! This boat can take a beating for the way it is built!!! Perfect for a solo sailor or couple that want to travel. I doubt it will last long. I would want a survey done though. I would also want more cold storage or freezer space. Perhaps take out the gimbaled stove and add a freezer instead?

@jimmyallen2245 11 месяцев назад

Sorry it’s over priced for the current market price of similar vessels.

@sanfranciscobay 11 месяцев назад

$29,000

@michaelhickey8868 3 месяца назад

Needs a bench for the NAV Station

@sirknite 2 месяца назад

it does not seem to be listed on the broker site listed above

@jackrichards1863 10 месяцев назад

Noob but keen. One guy came saying its a steel 33 that would not be able to move through the water? I consider it fairly tough 0.125" mild steel with lead ballast and a deep keel. So very stable and sorta tough. Mainly good for stable mooring ? Any responses to the speed of the vessel? Wont all that sail area make a rather fast boat?

@ronaldnickell6110 10 месяцев назад

Speed is determined by hull length. Of course the amount of sail has a factor also, but hull length determines the bow wave that determines the max speed for a given hull. You can exceed this of course but at a tremendous cost to the amount of power required. Example: hull designed for 8 knots to run 11-12 knots would require nearly double the horsepower.

@neilestenson6595 11 дней назад

Perfect PNW inside passage boat.

@sherriboggs4497 8 месяцев назад

Its awesome but I didnt see a price

@fullnelson3028 10 месяцев назад

how do you guys see where you're going in these sailboats? Is that why the stick boats have the right of way? because they can't see anything?

@MrBrian8749 10 месяцев назад

I think she's ideal for the GGR° with a few modifications.

@adrianrubi5012 11 месяцев назад

Orca-proof rudder

@dennismacdonald2003 11 месяцев назад

Nice where it located I look at it

@timhardman4764 11 месяцев назад

you read description

@guydauderman1645 11 месяцев назад

I’m interested. Where is it and how do I get in touch with the seller?

@sanfranciscobay 11 месяцев назад

$29,000

@JasonEllison 4 месяца назад

that was a spinnaker pole, no?

@donotwantahandle1111 10 месяцев назад

This boat could hit a container and probably won't sink!

@alandeardorff5142 11 месяцев назад

Who do you contact for more information about the boat?

@DaveHines1 11 месяцев назад

Details are in the description (as usual)

@alandeardorff5142 11 месяцев назад

Actually I couldn’t find contact information in the video

@DaveHines1 11 месяцев назад

@@alandeardorff5142 it’s not in the video , it’s in the description text

@djangorheinhardt 11 месяцев назад

What is the price of this arc pleaze?.It looks nice .

@sanfranciscobay 11 месяцев назад

$29,000

@geraldmolik7320 9 месяцев назад

@@sanfranciscobayThis vessel is way way to over priced for what the market calls for. But she sure looks nice and as the late great Mr. P. T. Barnum once said "there's a sucker born every minute". Is today your minute?

@jerrysmith3515 11 месяцев назад

Do you think this could be a single handed boat? I only know the basics.

@trentstaggerly7455 11 месяцев назад

Around 30' is the maximum recommended for a 'Single Hander' One could argue this 33' beauty could work. When we are talking about single handing a sailboat, a Sloop Rig is the simplest (and 30' or under) This boat has a Mizzen Mast and therefore adds another sail to contend with.

@geraldmolik7320 9 месяцев назад

@@trentstaggerly7455 Maybe 30 feet is your max length. But I rather love my 45 footer and I've sailed her around the world twice with no problems.

@blackbirdxx4613 9 месяцев назад

What is the cost

@Whit-mh9nt 6 месяцев назад

Price is high for the market now. Very high. That covpckpit would be the tortures of hell in weather

@CheekyMonkey1776 11 месяцев назад

Does this guy ever go sailing? Or is he an armchair captain? 8:48

@charleyjohnson4823 11 месяцев назад

Any chance Randi can come back, she kind of made the channel.

@rebaterun662 10 месяцев назад

How much?

@danratsnapnames 11 месяцев назад

where is this located and what is the price?

@heiner71 11 месяцев назад

Read the description of the video.

@danratsnapnames 11 месяцев назад

@@heiner71 for all those wondering the same thing, its $35k. and no i dont want to READ.. i'm illiterate.

@virginiai.3632 11 месяцев назад

I'm in love with it. Broker listing says great for cove exploration. So no Atlantic crossing?

@edmiller1012 11 месяцев назад

The boat has sailed extensively in the Great Lakes, when it was new. Since the rebuild she has only sailed from Quebec City to the Gulf of Saint Lawrence then Bahamas and back and the coast of Nova Scotia.

@virginiai.3632 11 месяцев назад

I thought about this question further and figured many sailors would respond " anything can cross the Atlantic if you're brave ( and clever) enough.

@sinbadcleo 11 месяцев назад

Why not? 'If you can keep the ocean on the outside and you on the inside, all else is manageable.' I'd bring it back to UK, with a pitstop in Co Cork for some Murphey's....

@rbnhood39 11 месяцев назад

The addition of air conditioning would be a must for a steel boat. It would be like floating in an oven otherwise.

@drx1xym154 11 месяцев назад

yes, looks like it is setup for higher latitudes - weather wise - with the big heater/stove combo. This 30' Al Mason does appear to have good ventilation. It also looks like a smaller version of Odd - Odd Life Crafting has a 40' (maybe a 42'?) steel, sailing monohull, though theirs has a lifting "keel" or variable draft. Tales from The Old SeaDog - has a 33' steel boat ... as long as the waters you trawl are "cool" - that would really help getting everything else cool, below the deck.

@rbnhood39 11 месяцев назад

@@drx1xym154 … I’m very familiar with Odd Life, I watched the whole rebuild. One hell of a job those two did. I can’t remember if they had air conditioning or not. Down there in Brazil I sure hope so. Yikes.

@CheersWarren 11 месяцев назад

@@rbnhood39 no AC!

@erichschinzel6486 4 месяца назад

Looks like an IKEA job.

@RobertSipes-tf5sv 11 месяцев назад

This kind of makes me sick. I’m in the process of selling my property so I can purchase a full time cruiser. This is a nearly perfect match for this solo sailor. At the price I could easily afford to make a few mods I would want. Great video thanks

@virginiai.3632 11 месяцев назад

Ditto.

@RobertSipes-tf5sv 11 месяцев назад

Well my place dead ends on a river too so why don’t you come buy it so I can get this boat 😉

@virginiai.3632 11 месяцев назад

@@RobertSipes-tf5sv maybe we can get it together. I can't sail, yet. But I'm a great second mate. (i really want this boat too. would hire someone to help me get it where it needs to be)

@RobertSipes-tf5sv 11 месяцев назад

Unfortunately I’m tied into my place till it sells. Once that happens I’ll find the right boat. It’s actually a little cramped for the kind of long term cruising/living I plan on. I sailed a 33’ for a few years. 38 would be perfect

@RobertSipes-tf5sv 11 месяцев назад

Left you a message on your hail video

@bunk95 4 месяца назад

Did anyone try to get it without using the [non-delete] add-ons to the transaction yet?

@mikemarriam 11 месяцев назад

30K us? What an opportunity.

@swiftmatic 4 месяца назад

Noice!

@halthehealer 11 месяцев назад

What is the sale price?

@sanfranciscobay 11 месяцев назад

$29,000

@cherjohnson5807 9 месяцев назад

👍🏽👍🏽

@glenndavis479 11 месяцев назад

Old boat with an Ikea refit inside but it does look nice.

@edmiller1012 11 месяцев назад

There is no MDF or glued wood of any sort in the rebuild, so not much like IKEA at all

@virginiai.3632 11 месяцев назад

@@edmiller1012 I can see you're a woodsmith Ed. 🙂

@glenndavis479 11 месяцев назад

@@edmiller1012 It looks like Ikea but I wasn't suggesting it was built with cheap bullshit wood , I actually think the inside looks good how it's done.

@geraldmolik7320 9 месяцев назад

Ewwwwwwwww, someone's question hit a soft spot. Ikea, lol don't be a hater.

@knittiotsavant 11 месяцев назад

Beautiful, but that cockpit is seriously unprotected. I'm too old to feel safe in that cockpit on a crossing.

@colynfleming5878 3 месяца назад

You love the Channel and the content, but dirt cheap in most books refers to sub 10k

@VOGTLANDOUTDOORS 5 месяцев назад

Newbies question: “ketch” or a “trawl”? I thought when the wheel was behind the mizzenmast it was a “trawl”? Lovely boat! Great channel! Cheers, Mark

@jeffadams7134 5 месяцев назад

You mean YAWL!!!

@davidfox59 4 месяца назад

And a Yawl is where the helm is in front of the mast

@chele-chele 2 месяца назад

@@davidfox59 The difference between a ketch and a yawl is not the placement of the helm but the mizzenmast step in relation to the rudder head. If fore of it is a ketch, if stepped aft of it, it's a yawl.

@brianmclean2907 11 месяцев назад

Whats the price

@sanfranciscobay 11 месяцев назад

$29,000

@jammer3618 4 месяца назад

Steel boat that old is potentially problematic.

@vincent7520 10 месяцев назад

Cheap. But steel is not so great. Too heavy for a 35ft boat. A good length weight ratio for steel starts at 50ft or so… below it is very heavy or you need a lot of extra sail to perform well…

@herieqb 11 месяцев назад

why do you only show the deck and the inside of the boat but never under the bottom of the boat which is very important?

@offplanetevent 11 месяцев назад

Vessel...good. Ear buds promotion...very bad.

@stephenburnage7687 11 месяцев назад

A steel hull is 5X the work of a fiberglass boat, as well as being much heavier. Buying only makes sence if either you are headed into ice or if you think you might ground the boat on a coral reef.

@thecocktailian2091 11 месяцев назад

Fiberglass just deteriorates SO fast. No matter how well you maintain it, it has to be completely redone in twenty years. Im a wooden boat guy, so I dont know anything about steel boats.

@stephenburnage7687 11 месяцев назад

@@thecocktailian2091 Wooden boats is another whole subject....;) But fibreglass should reliable last fifty years or more. Sure, the surface may oxidize and require painting and sure, some 1970's boats have suffered from osmosis but that is still not remotely as big a deal as welding in new steel plates or replacing rotted timbers ie fibreglass remains the rational choice for 90%+ of boat owners, especially if you are in warmer waters.

@boxertwinjeff 11 месяцев назад

@@thecocktailian2091 you on drugs 😅

@CheersWarren 11 месяцев назад

Remember steel is 30x the ‘strength’ compared to fiberglass so. This is one sweet ride, and there is no fatigue issues with steel compared to fiberglass. Lovely boat.😊

@boxertwinjeff 11 месяцев назад

@@thecocktailian2091 A Solid Fibreglass hull should last forever or atleast indefinitely.

@carlyleporter5388 4 месяца назад

I bid $3500 if a trailer is included.

@halthehealer 11 месяцев назад

Why don't you disclose the price? 2:48

@sanfranciscobay 11 месяцев назад

$29,000

@thomaselliott9485 9 месяцев назад

20k

@margosdesarian 11 месяцев назад

Thats a kettle, not a teapot

@swimcat2333 11 месяцев назад

Did someone mention electrolysis -- and this is a 48 year old boat. Electrolysis is a nightmare, I did not like the work I helped a a friend with on his aluminum boat -- electrolysis problem. I need a quarter berth

@mitchellsmith4690 11 месяцев назад

Electrolysis is a much smaller consideration for steel.

@swimcat2333 11 месяцев назад

@mitchellsmith4690 wow, I thought this reaction was the same on both metals, didn't know steel wasn't a big problem

@mitchellsmith4690 11 месяцев назад

@@swimcat2333 steel is subject to rust a3nd corrosion, but the degree that aluminum can go by electrolysis is far far beyond what steel gets with rust. Both vary by specific alloy though.

@dabbbles 11 месяцев назад

How cheap is 'dirt'?

@sanfranciscobay 11 месяцев назад

$29,000

@tvelocidad 11 месяцев назад

Is she a keel stepped mast or deck stepped?

@rbnhood39 11 месяцев назад

The price is listed when you click on more.

@tvelocidad 11 месяцев назад

@rbnhood39 I was asking about the mast, not the price.

@rbnhood39 11 месяцев назад

@@tvelocidad… that’s weird, I was responding to the guy asking about the price. Hmmm

@edmiller1012 11 месяцев назад

@@tvelocidaddeck stepped

@tvelocidad 11 месяцев назад

@@rbnhood39 lol... no wires.

@stephenshambley2609 11 месяцев назад

48 year old steel boat. lol. they better get the hull x-rayed. 48 years of electrolysis means they probably don't have much left. 😂

@homer5802 10 месяцев назад

I have a 32 ft., 1975 Marinette. I sandblasted the entire hull in 2020, and she's as good as the day she was built. Good maintenance makes all the difference in the world.

@tobejonsson6272 7 месяцев назад

Unless it's been zinced religiously

@Anashadk 6 месяцев назад

I was just looking at a 50ft steel boat from the 70s, had 12mm under water and 6mm over water. No problems but I would personally check the thickness of any steel boat regardless of age.

@danmessina6260 6 месяцев назад

@@homer5802Marinette is aluminum

@jeffadams7134 5 месяцев назад

My friend you have no CLUE what you are talking about!!!! IGNORANCE!!!!!

@wellarmedlamb2447 11 месяцев назад

Nice boat but the hull is not designed for extended blue water sailing. You need an S formed hull (difficult to do) with steel construction in order to have a comfortable motion at sea.

@mikemendes7598 11 месяцев назад

Um, no not really. Steel boats with hard chines have sailed for many, many decades with no such complaints.

@petethewrist 10 месяцев назад

Fin keel boats go cheap. Steel hull boats go cheep. You will spend so much on mooring fees probly more in ten years than the boat cost. Boats are a buyers market.