Unboxing and Testing the New "Boar Box" from Gold Hog!

Подписаться 1,3 млн

Просмотров 220 тыс.

50% 1

The people at Gold Hog, asked me to help test their new machine, the "Boar Box" before it's release this fall. They asked me to give them feedback on anything that they might need to refine before the release. It was very well designed and well made, however I had some suggestions. Check out the new machine, the "Boar Box" from Gold Hog.
_______________
Dan's website, paydirt, store, and auctions: danhurdprospecting.com
SUBSCRIBE BY CLICKING THIS LINK: ru-vid.com...
FOLLOW ME AROUND THE WEB AND ON SOCIAL MEDIA AT:
Instagram: / dan_hurd_prospecting
Patreon - / danhurd
Website -- www.danhurdprospecting.com
Facebook -- / danhurdgold
Twitter -- / @danprospecting
SPONSORS:
Arbor Fabricating classifiers use this link: arborfab.com/Prospecting_c_37....
10% discount code: danhurd
Gold Stream Placer Supplies: / goldstreamplacer
Kellyco metal detectors and prospecting equipment: shrsl.com/1geay-1ueu-s8em
Links to equipment used in my videos:
Gold panning equipment:
Garrett 15" Supper Sluice gold pan: shrsl.com/2c380
Garrett Gold Guzzler snuffer: shrsl.com/2c38f
Garrett gold panning kit: shrsl.com/2c38m
Razor Back Shovel: amzn.to/2ytODrW
Crevicing tools: amzn.to/2yoNUrY
Metal detecting equipment:
Garrett AT Gold metal detector: shrsl.com/2c397
Gold Bug 2 metal detector: shrsl.com/2c39a
Falcon MD 20: amzn.to/326zZUj
Garret pinpointer: shrsl.com/2c39m
Sand scoop: shrsl.com/2c3a1
Filming equipment:
Sony HX80 camera: amzn.to/2YwAmJr
Ricoh WG50 underwater/closeup camera: amzn.to/2LTgb2p
Sunglasses with built in camera: amzn.to/31bEAnJ
USB microscope: amzn.to/2LSDk55
Larger mining equipment:
Gold cube: shrsl.com/2c3a6
Gold cube trommel: shrsl.com/2c3ab
Honda generator: amzn.to/2OwFVnH
Honda water pump: amzn.to/2LS5gGj
Milwaukee shop vac: amzn.to/2YwB3T3
Milwaukee hammer drill: amzn.to/2YzrMcR
Cobra crusher: amzn.to/3164NE3
KK8 Kiln: amzn.to/2MrRzNT
Dan's hat: amzn.to/2LU34Ou
This video is produced by Dan Hurd, Prospector, Miner, Teacher and RU-vidr, as part of his RU-vid channel based on educational videos about gold mining, gold panning, prospecting, rock hounding, and mineral collecting.
#goldpanning #thefinders #findinggold

Опубликовано:

21 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 859

@olepigeon Год назад

Engineers _LOVE_ unbiased feedback. I'm sure the company was disappointed with the first review, but they sent you this development unit for exactly the kind of feedback they need. Not a sugared up praise of something because they're a sponsor. Having real prospectors review with critical feedback is what they want so they can produce a great product from the beginning. You're doing them an invaluable service, so I hope they take the suggestions to heart.

@susanturcotte3176 Год назад

Amen on that! Many times (unfortunately) people gave their opinions based on not wanting to hurt feelings. As a past owner of 5 businesses, I want the actual truth or else I'll have to close my doors wondering where my customers went.

@TheDSP1970 Год назад

Show me the engineer degree or previous engineering jobs the person who designed this had. I'm just saying it like I see it.

@olepigeon Год назад

@@TheDSP1970 It's a prototype. I'd suggest waiting until Dan reviews the final product.

@erok268 Год назад

@@TheDSP1970@olepigeon agreed engineers love unbiased feedback lolololol it's a good idea though, a gold cube remix thats more of a rectangular prism, better to store away for the hobbyist... but yeah I totally agree that an engineer did not design this. As an apprentice machinist and industrial mechanic I critique the proverbial they and their choices all the time. And the vibe is more like "I got an idea", and the constraints were make a gold cube but more compact and my brand.

@invictusfarmer7188 Год назад

i own their extended raptor flare 2.0 and i can tell you without a doubt they improve constantly.

@AR_119 Год назад

I must say I respect a company that wants honest feedback and tries to actually improve their products they deliver to their customers.

@ncoutdooradventures6148 Год назад

Doc, at Gold Hawg, is the best! He answers pretty much all questions, sent in, himself! And he is, himself, also a gold prospector! His instructional videos on how to set up so you can catch the most gold you can, are phenomenal!

@bethsands7665 Год назад

Wow, that company is lucky and wise to send you the proto-type as you had intricate and useful feed-back !!

@dragonblade7273 Год назад

Well you would Too if you got a Sponsorship deal Things are always better free

@christopherdalzell6253 Год назад

It's free advertising and normally they would have to pay testers to try it out. He's not lucky he's doing there job

@waynehames4637 Год назад

One thing I saw was if you turn the legs around where the offset is on the outside, it looks like a bucket would fit underneath without having to pick it up.

@TurkDinski Год назад

I’ve seen generally large RU-vidrs put a lot less into videos like this for a lot more $$$. You go above and beyond. The companies you associate with have a lot less and get a lot more. All I’m saying is you deserve more than I assume you receive. I’m most likely panning a non gold bearing stream consistently, but I love it all the same because of videos like yours

@susanturcotte3176 Год назад

Completely agree! A news item popped up on my phone one day. There was a "short" next in line and it was Dan Hurd! Lucky me! My very first subscription and I've watched everything he has posted! I'm living life- full of gold- like people like Dan!

@brunobarks6544 Год назад

An idea came to mind : epoxy small magnets to put loose wing nuts on so you dont loose them in the gravel 👍 you can have my idea. Lol

@theyachty Год назад

I think those legs with bends were intended to be facing forwards and backwards rather than out to the sides. I think there are too many things that aren't great with the machine, a lot of annoying little things that need looked at. Not very sure you need the wing nuts holding down the mats. Don't think it's something I would buy, not in its present form anyway. Sorry if I appear negative, that's not my intention, just saying what I reckon..

@Ladarian_ Год назад

yup user error

@brownzilla-_5092 Год назад

No one cares

@nataliedeyton6829 Год назад

I was gonna mention the same thing .. I think the legs were installed backwards

@jameskim62 Год назад

I studied over 3years to purchase a sluce box, I pick Keene engineering product specially A52S.

@nataliedeyton6829 Год назад

Can’t go wrong with a Keen anything really I run a 4 inch dredge with air and love it ...

@vaneimortus9139 Год назад

A idea came to mind.. For the front and back plate. Put a hinge at the bottom with just 2 wing nuts at the top to hold it closed. If the hinges are slightly (very slightly) spring loaded they could act as platform for holding the pans for cleaning out the mats also.

@ringersprospectingjournal7085 Год назад

I was thinking along the same lines, but I was thinking a stainless steel piano hinge along the side with spring loaded clasps or latches on the other side. Wingnuts and bolts are a failure pount

@mattbrown7483 Год назад

@@ringersprospectingjournal7085 I like the idea of hinges and spring clasps, but I think the hinges should be slip joint hinges so the plates can be removed.

@joaniemckinney970 Год назад

I think some magnets could close the "Doors" instead of the endless wingnuts. I like the piano hinge idea!

@kamakitten Год назад

@@joaniemckinney970 I was thinking magnets to hold the plates with the riffles in. So you don't have to reach your hands in to tighten them.

@Knightyme Год назад

@@joaniemckinney970 A lot of material is magnetic. Magnets anywhere close to that material would soon be gunked up. In principal its a great idea, in practice probably more a pain to deal with, and once magnetic material gets there it will never be fully 'clean' again.

@sirkriskringle Год назад

What i like about this Gold Hog is it all come's apart , makes for less space used and Ezzy transport :) . SKK .

@leninmi7579 Год назад

That's our man, Dan the gold pan man.👍

@BustedknucklesProspecting Год назад

Hey Dan, the reason for 2 different leg styles, you can use the straight legs on a solid surface like concrete. And the curved legs with the tabs on the bottom are for softer grounds like sand.. the tabs will help stop the legs from sinking in the sands and becoming un-level when the tailing water starts erosion

@DS-wk6vh Год назад

Yes get rid of the wing nuts because you know that you’re going to drop and lose them out in the field. Have some type of clip pen hanging on a tiny little table so you can’t lose them. 👍👍👍

@michiganprospectors Год назад

You tell it like it is and do not hold back. I like that. Its part of why I watch your videos.

@carlnelson7358 Год назад

Actually looks good. I think the main purpose of this unit is to be able to attach it to a backpack fairly easily, which you can't do with the gold cube. Your assertions with with product are Spot on. I can't wait to see the finished product with your review. If I could say anything about it, is that if it was somehow foldable and easier to backpack into a location, it would be priceless.

@lonnywilcox445 Год назад

A smaller hole punch plate as an accessory would be nice. Most of us are never going to see a 1/2" nugget in our mining adventures, but if you do regularly find 1/2" nuggets I am available for adoption. And like your dad said, rivet nuts or better yet rivet studs would be the way to go for making captured fasteners that don't fall out when you put it together. I'm sure Doc is already headed that direction.

@Knightyme Год назад

Does not matter the hole size, it will still get fouled up, just with smaller stones. It is always going to be an issue. The only way to avoid it is to classify and only use material that is smaller than the hole, which will only need catch the odd larger stone that got through the classifying process.

@randylewis3080 Год назад

Would a slotted punch plate not be better or maybe they could provide the unit with one of each. Different materials need different solutions.

@summerland6397 Год назад

Paint those wingnuts bright red. Use a piece of small slotted pipe section to tighten/loosen those wingnuts and save the fingers. Another two levels of wash plate on top before it get dumped. Great video Dan and Dad!

@cflwhat Год назад

Dan Hurd is as entertaining to watch as I remember Bill Nye being as a kid. Totally different but I absolutely love the educational entertainment. Thanks Dan!

@RalseiGaming Год назад

bill nye actually does some more adult science shows if i remember correctly but i agree with you

@pathoodjoy Год назад

Loved this - a giant experiment and we get to watch. Love being on the receiving end of your expertise and Gold Hog's product development. Neat!

@susanturcotte3176 Год назад

I echo that! What old folks grew up doing: using your imagination. NOT a battery operated, remote controlled, makes-all-the-noises-for-you, toy!

@youtubeSuckssNow Год назад

Oh dope a new box. I love seeing the new gear tests. And a scathing honest review is better than a dishonest neutral review. Also the legs seem like they are supposed to be facing the other direction.

@arte9855 Год назад

Yes I felt like the legs needed to be turned 1/4 degree facing outward front and back not to the sides. Would make a wider stance. BUT the leg bends need to go at the top to accept a bucket. I'd say make it wider then eight inches but maybe there was a reason to narrow it up. A slick plate on top of the punch plate might help in the loss of material that runs off This won't work as a river sluice without power unless you bucket water like that other wizard in Wisconsin. Five mats to pull instead of one or two??? Who thought that was a good idea? Punch plate holes too big...the laser cut Freddie Dodge teardrops would work better? Jury is still out in this one.

@jimmime Год назад

Nice first run Dan, and family! With needed modifications noted.

@chriscarley9951 Год назад

Very nice Dan, thanks for not waiting & releasing the video. I had some improvement ideas that I sent directly to Doc's team. Love an honest review. Thanx 👍

@LANightonFire Год назад

Very informative. Seems like a solid product with exception to some minor inconvenience that could be fixed.

@brianlhughes Год назад

Have a wide shallow plastic hopper to go on the top with legs to direct the material straight down into the plate, enough of a gap so you can clean out the rocks.

@jameskim62 Год назад

More then 3years of very careful anyalization. I have purchased Keene engineering products specially A52S. It is SOOOOO GOOD in every which ways such as easy recovery of the gold, quality, easy to use, upgradeability, compactness and much much more..... GO WITH KEENE !!!!!!

@dakoocokid Год назад

As a prior Boy Scout, you are doing a great thing for so many people by keeping that place nice! For every one hour of work you put in there I'm sure there are over 50 hours of enjoyment :)

@peterharris8372 Год назад

The feet can have a swivel to accommodate the difference in ground surfaces. Use eyebolts instead of wing nuts and thread the plate so there is the bolts don't fall out and thread the grizzly for the eyebolts to secure to. Just some thoughts.

@avidhunter6169 Год назад

I have a suggestion that might help the stability of the machine in the field especially on uneven ground. You could use a carabiner to clip a length of cordage, such as 550 paracord, to the eye bolts used to hold the legs in place and run the cordage to stakes pounded into the ground. That would prevent any accidental tipping over of the Boar Box. I would use the carabiners to attach the cordage to the eye bolts simply because it would make it easier to remove it to allow for adjusting the length of the legs if necessary and for storing the cord and stakes when transporting. Just a thought, I don't know if you would need to do it or if it would actually be useful but then I don't have the ability to field test the box like you do. Would like to know your thoughts on the idea however.

@easternwoods4378 Год назад

I like the idea. I'd go with tent cord adjusting "lugs" rather than carabiners. I think it definitely nneds additional stability especially if you're going to work it hard. Dan, I think the formed legs were intended to go straight down. That's why the U brackets are designed to rotate. If the legs go straight down then the foot would be flat. Despite that I like your idea of rounding the feet. I'd weld a nut onto the U bracket and skip tapping it. There;s quite a few examples commercially available. You can get a lot more thread that way than tapping the bracket Dan, I've had a lot of experienced engineers ask why you can't weld aluminum parts to steel. All in all I like it Dan, how long does a battery last? And don't take the battery out of your truck down to the river and then try to start your truck with a dead battery.

@seantiz Год назад

I assume you can loosen the bolts that secure the tops of the legs, allowing the legs to slide all the way up the sides of the unit, neatly stowing them in place for storage or transportation. (Extra points for my run-on sentence.)

@Knightyme Год назад

The bolt / wingnut holding the plates together. You suggested that the bolt be welded on, that leaves the bolts sticking out during transport. If on the other hand the nut is the one welded on and the bolt with a winged head is the removable part, that gets rid of the protrusions when transporting, while still keeping the winged aspect of the system for ease of fastening.

@steven_ewen Год назад

To many parts and pieces for my liking. Thank you for sharing Dan

@SwampElk Год назад

Dan, you nailed it. Wider legs, longer and steeper classifier with turned up edges at the end. Someone mentioned hinges with latches on the panels and I think slotted holes instead of round might be better. No bolts holding the mats down would make clean up easier and less hardware to lose.

@josephcormier5974 Год назад

Not too bad for a prototype looking forward to seeing more on this five stars sir

@johnsharp8627 Год назад

They are fortunate to get such an honest and thorough testing from you Dan.

@johnfarrow5873 Год назад

Please please please do more of these if you can

@ncoutdooradventures6148 Год назад

I think it would be cool if they shipped the machine into a tub that can double as the catch tub/water reservoir

@dustyc324 Год назад

one that could fit the whole kit in it for transport and storage.

@Domarnett Год назад

They could redesign the legs to attach the box to the top of the tub instead of sitting in the bottom. No way the thing could tip over once you put it together.

@susanturcotte3176 Год назад

@@Domarnett That is another great idea! Have a storage/water tub fir easy use and portability. The only problem is keeping it light to carry... a plastic tub may not last too long. That's why I asked Dan about weight. I look at weight because I'm disabled with a major back injury.

@ncoutdooradventures6148 Год назад

@@susanturcotte3176 they could always use one of those totes that has the extending handle on wheels! Complete wash plant, pump, battery, and carrying tote that doubles as the water reservoir/catch basin,,, all in one complete package! I'd buy it!

@susanturcotte3176 Год назад

@@ncoutdooradventures6148 I would buy it, too! All in one unit. Would be easy (except for very steep inclines, deep sand and thick foliage).

@johnfarrow5873 Год назад

Can I make a suggestion Dan that they put some kind of level sight piece built on to the unit

@Singe0255 Год назад

+1 on this idea too. You can dial it in at home on flat surface, and then be sure it's right when you in the field by checking the levels.

@madpete6438 Год назад

Mixing steel and alloy causes rust at the interface. Nickel plated steel is also prone to corrosion. Rivnuts would be good to hold the plates on!

@lambastepirate Год назад

It is called electrolysis

@jk-76 Год назад

Not just because Mike Pung is a friend, but a Gold Cube is simple and absolutely effective. Toss a trommel on it and chew through dirt.

@gotdangelectric5599 Год назад

This is a lot cheaper though, and looks like you could do more with it

@jk-76 Год назад

@@gotdangelectric5599 a gold cube is $500.00. I don't see the "more".

@TheDSP1970 Год назад

He solved nothing making this out of metal, besides putting his mats in it & making stuff for the sake of making stuff & complicating it. Prove me wrong, what did he overwhelmingly improve?

@jk-76 Год назад

@@TheDSP1970 I am not arguing for this. I wouldn't develop something you can already get. P.S. I have a 10 inch Dream Mat it it is worth the money. I need to get more for playing with different sluices.

@TheDSP1970 Год назад

@@jk-76 I was agreeing with you, yes, another Damascus knife builder we do not need, or do we?

@ahummerich2751 Год назад

You’re doing a great job taking care of the camp. Beautiful.

@oldtex1940 Год назад

Get rid of the wingnuts and use spring clasps. Maybe a hinged door?

@passthetomahawk Год назад

great feedback for the new machine these little tips are what make mining and prospecting easy for all of us so i hope they use your info

@Papabull23 Год назад

I’ve always wanted to start panning and you’ve so inspired me. I live on the Fraser so I am so getting one of these. Cheers

@XBDAX1 Год назад

I feel like it needs to be twice as big all around so you can use a full-sized shovel to process more material.

@whynotdean8966 Год назад

I think that defeats the whole purpose. It seems like it was designed to be something you can strap on your back and use in tight quarters and with limited water. And its perfect for that.

@glenj.taylor2938 Год назад

I would guess this is more oriented towards prospecting or running small amounts of material than being used as a small scale wash plant.

@Engine_biulds Год назад

I think it was smart to make the video and point this out gold hog seams to be a stout company with YOU in mind rather than the money. Good testing and prototyping is pretty awesome

@charlespierce8412 Год назад

Dan I enjoy viewing what you and your family share as ya chase the Gold shiny. Love the scenery and wether its no shiny or if gold is found its reality i shall still watch. I hope you include portable work table once out in the field , as it could prolong work endurance for certain duties. Best wishes.

@christhompson4270 Год назад

A good run for a new design, definitely does a good job and your ideas are sound idea’s. Thank you for sharing 🙏👍❤️

@brendachilders8075 Год назад

Wow, what a lesson!! Only thing I wondered, was bubbles on that matt, did you brush off the bubbles?

@banditprospecting6784 Год назад

Dan thanks for being honest about the boar box. I can’t wait until it releases!

@KLAUSKARES Год назад

Always such a joy to see a niceee long video.Epic backdrop as always you are a master🥰👏👏👏

@frankmarin5421 Год назад

I like your idea and improving as you build want to see this finished product. Thanks for the demonstration

@jackjackgeo7508 Год назад

Lol Another entertaining and informative video Dan! Thank you! Whenever there's cursing heard it's usually a sign that something needs to be changed or fixed. Thanks again for another teaching moment Dan! Take Care Jack

@PilotMcbride Год назад

Heck of a way to collect lead for remoulding bullets 👍

@ANIMAL168 Год назад

Good review Dan. You covered about everything. Benny

@OldCowboy450 Год назад

Spring clips on front and back so quick access no wing nuts ( they get lost out in the bush).Mats slide into grove to hold them again no wing nut very fast clean up. Pretty exciting machine.

@scottsdialyadventure1338 Год назад

Oh wow I used to live right down the road from there and had a couple of friends and old German lady named Aggie and I'm well acquainted with that area. Haven't been up there for a couple decades I'd love to visit plus my Canadian Uncle turned a hundred years old. Really enjoy your multiple locations and showing all the different potential sites

@davidbean5807 Год назад

One more suggestion add a couple of 12Vdc Vibrators one on each side. This is actually something anyone could modify as a DIY project. This machine looks like it would be a great candidate for a trommel . Cast off washed gravel, dropping rest into a funneled top of machine. Good Addons for higher profitability for GoldHog.

@GSProspecting Год назад

Great info fam. Been looking at something like that fam. Keep on having fun and living the dream fam. Gold Squad Out!!!

@kevinrivera1492 Год назад

Great compact idea!

@darylthomas4522 Год назад

The wing nuts must be steel so that a magnet can retrieve them when they are inevitably dropped

@mattpanas5741 Год назад

I love gold hog products! And I understand this a prototype.. but it misses the mark for the advanced prospecter. I hope Gold Hog never stops trying to make a better mouse trap. Anyone that has been in the field knows that nuts- bolts and wing nuts are a pain! And if you have them in your process you should paint them. If this is another cons clean up prototype I have three already! Thanks for the video Dan.

@joesinakandid528 Год назад

Nuts (I try to use Stainless Nyloc ones), bolts washers and such just need to be very carefully handled. Having said that I always have a medium sized, twist cap, 'spare stuff' container' that I always carry extras in. WELL worth the bother and always there when butterflies steal "THE" most important nut, washer or bolt. Not only that but you are a real hero if someone else just lost THEIR most important fastener. Also a good place to store your Neo magnet, too.

@johnsweat1723 Год назад

Nice show. Doc at Gold hog has done a great job and sure like a lot of their products it will be picked through to be another excellent product. Love the shows keep them coming.

@goldhawk3512 Год назад

10years ago goldhog has a unit it calls "the gold hog highbanker", the boar looks like the little brother of the unit ^^

@royjohnson465 Год назад

Yes, I was thinking the exact same thing!! I remember that much bigger old zig-zag highbanker from Gold Hog!!

@sortius_ Год назад

Thinking about those square feet, because you can change the angle, maybe something like rifle/machine gun bipod feet where they're slightly convex sleds. They obviously don't need to be grippy, just stable enough to be in a tub.

@jon2000sun Год назад

what a great review of a prototype. Weld every bolt in, then this will be great. I wish I could gold pan in the UK legally, if I could, I would love this as a hobbiest.

@azau79 Год назад

Great improvement ideas Dan.

@RichardRoger1966 Год назад

Nice looking machine... Well done Doc!

@guymccown5342 Год назад

Good start on design

@mindseyeproductions8798 Год назад

6:10 Bringing out the big guns

@geradkavanagh8240 Год назад

I worked a home made system like this 30 years ago. My feed in was longer and had 2 basic riffle bars in the top to trap bigger stuff. Rest was a combination of timber riffles with hessian underneath. Then a miners moss layer and a fine riffle bed at the bottom. Each layer had a screen to reduce particle size. Was about 85% efficient which given that it was all timber and scrap metal was pretty good. Only had to pan the fine tailings to check I wasn't missing too much flour gold. Tailings were about 20% of original material through and I was dealing with heavy clay like material.

@jeremiahjenkins7114 Год назад

Love your video great demo of that new Gold Hog machine!

@weathercaster Год назад

I understand the idea of it being a prototype, but can we talk about those welds on the offset legs? I think they need to find someone who can tig a little cleaner than that, or if they are using a mig aluminum process, that is still an unsat looking product. Also, adjusting the leg length can be just as efficient as adjusting the leg angle to obtain a level unit. Instead of open ports, you can add slots to slide in a plexiglass port window to ease any splash out. Lots of areas for mechanical and aesthetic improvement, but overall, it seems like a solid piece of equipment.

@Mr007troy Год назад

very well done analysis, you know your gold!

@shadow4280 Год назад

Excellent review. Very detailed.

@lesterleporesr5228 Год назад

very good analysis and suggestions! Thank you, Dan!!!👍😉

@donaldheck7251 Год назад

This looks GREAT. I need to look into getting one of these.

@raptr2005 Год назад

great video dan. that was a great review! as always keep them videos coming

@maryjaynemay3410 Год назад

Good for testing. Small enough to take along on trips.

@bravomikesierra Год назад

That "bad latin makes carp die" shirt just cracked me up. Haven't laughed like that in a bit!

@donhoughton271 Год назад

Liked all of the improvements you pointed out .Hope gold hog takes your advice about all you said.

@joaniemckinney970 Год назад

I think that little unit looks back packable! I like that a lot and it would be perfect for the beaches where I go. For the rivers I would like a different punch plate. I think you could make a boil box for it that could fold so it would be compact to carry but would fold out to better shepherd the tailings away from the unit's base. I could see that standing in a stream and working though! Nice job Gold Hog! Thanks for the honest and in depth review Dan and Fam! Can't wait to see the mods!

@JoeyDadawg Год назад

Instead of bolts with wing nuts. How about studs that are hook style with different holes to change the angle and for easy cleaning of the round rocks

@ronnieking1133 Год назад

Good video 📸 keep it up injoy watching them all got to love the gold !!

@StaceNyourFace Год назад

Maybe they could put a small magnetic strip on the outside where you could temporarily stick the wingnuts so that they don't get lost out in the wild. Somewhere that doesn't effect the process, of course. 😉

@wamlartmuse2983 Год назад

🍄💜 everyone! Thank you Dan!

@stephencrandellsr4915 Год назад

I think you hit the nail on the head with the necessary mods many supply with optional grizzly plates or slotted ones or bars 🤠

@freedomprospecting9034 Год назад

Very informative. Thanks Dan.

@beaudryadventures6785 Год назад

Great video Dan! We can't wait for our nice piece of ocean picture stone, it's just beautiful in the pictures online.

@looking8030 Год назад

Looks like a good thing

@twodeepupyours508 Год назад

You rock Dan

@asjamuir5534 Год назад

Looks like a highbanker sluice with a gold cube inside

@edsomers7814 Год назад

Very cool. I like it Dan,with a few modifications it will be great.😊☮️

@BillMulholland1 Год назад

Great video Dan! Thanks 🍻👍

@exoida Год назад

DESIGN change: add a plate at the bottom that can be screwed on to divert flow of tailings.. like wash plants have sluice boxes that can be added ... I mean it would add another layer use

@falseteethrealtarotAllRocks Год назад

Thank you Brother...

@cD-vg5go Год назад

the long offset legs with a round disc would be great for all ground, since your never on cement, and the legs angled out in forward or back , nice idea... straight small leggs great for small low bucket , like backpack in . Grizly could be longer on both sides and length

@Fatamus Год назад

Thank you for the video and good suggestions for 'da Hog' 👍 looks like it could be a useful tool.

@richardwarnock2789 Год назад

Dan at Stages Fantastic!!!; )

@richardvanasse9287 Год назад

Looks like a nice backpackable unit.

@mdagley1429 Год назад

As usual, a great video! This is a very interesting machine. It will be interesting to see what the final product looks like. I may well have to add one of these to my gold recovery amtool box.

@BlackLightStar Год назад

About the top grate: Suggest they just rivet a bracket to the rear plate and you just hang the grate on it. About the front plate mounting: Ask them to either install threaded rivets with a gasket between the main structure and the plate. About the tailings outlet: Ask them to install a short rubber matt, just to control the water and reduce splashing.