I just bought an enclosed trailer, my question is, can I put this inside my trailer with my 300gallon water tank? I’m one of your customers ajprestigemobiledetailing-LLC.. Winter is coming and this touchless wash is definitely my go to!!
Yo what's up man! Yeah absolutely you could mount this valve right inside the trailer anywhere within arms reach from the ground to keep it accessable🍻💯😎🔥❌
You want 2000psi for sure once ya get more than that it does get a bit riskier on the paint, but you can always just keep some distance. Higher gpm is helpful on bigger jobs, I like 4gpm myself
You could but stainless and hydrofluoric don’t get along over time, plus the cost of this valve makes it a bad idea, I’d recommend a normal downstream injector and a soaper nozzle to keep down the cost of using brighteners I’d say😎💯🍻❌
Ciudad de México, Viernes, Diciembre 25, 2020 12:29 Mexico City, Friday, December 25, 2020 12:29 Hello CHEM -X great videos and best of all excellent information, I have several questions for you: 1.- How long / far after anchoring THE SUTTNER ST-164 OR THE ST-166 DUAL FOAM INJECTOR, to a wall from / in my centralized equipment room to my10 bays 54 meters (170 feet) farthest bay? Can THE SUTTNER ST-164 OR THE ST-166 DUAL FOAM INJECTOR, still provide enough chemical to wash each individual car in each individual bay wash? What should be the thickness ID of the pipe / hose to reach that distance? Any suggestion or advice? the two -red and blue CHEMICAL INJECTOR PICK UP TUBE & STRAINER can go until two 55 gallons drums? A.) Concentrated Chemical / CarWash Shampoo 1:50 dilution rate (1gallon (3.785 litres) of detergent / shampoo to 49 gallons (185.2litres) of water, and B.) Dying Agent or Hydrophobic or Water Fearing Aid (aid / help in achieving the dryness of a vehicle in the removal of water from the surface) 1:55 dilution rate ( 1 gallon (3.785 litres) of drying agent to 54 gallons (204.3 litres) of hydrophobic agent. 2.- With your SUTTNER ST-2315 SHUT OFF GUN with your CHEM-X FOAM LANCE, how short the wand can be. I would like to have THE STAINLESS STEEL QUICK CONNECT COUPLING, THE SUTTNER ST-75S FOAM NOZZLE and THE ST-58 CHANGE OVER VALVE as chose to THE SUTTNER ST-2315 SHUT OFF GUN. The shorter the best, without THE ADJUSTABLE SUTTER VENTED LANCE GRIP WITH SIDE HANDLE AND THE STAINLESS STEEL, ROLLED THREAD & SUITABLE WITH CORROSIVE CHEMICALS I am located in Mexico City. Can you ship 8 each of the items listed above? What will be payment terms and method? Those items are going to be used with an industrial power washer 3 phase 220 volts, 200 bares (3,000 psig) pressure, 15 litres / min (4 gallons / min), 7.5 hp. motor, at 1.750 rpm What would be your very best prices to me. I am a carwash owner and the equipment will be used on my own business. I might be in the future tempted to be your distributor down here in Mexico if equipment performs Ok and prices are ridiculously accessible to the national market. In your vast experience what else do I need to accomplish best success with the above order. Best Regards Miguel González Tel: +52-55-5586-2514 From USA: 011-52-55-5586-2514 Cel / Mobile: +52-1-55-5451-6033 From USA: 011-521-55-5451-6033 E-mail: jomagos@jomagos.com PS. Please provide me with a direct e-mail address, so we can exchange info directly and I can send you carwash layout for your understanding:
Hey man could you tell me which restriction beutels I’d mount on the barbs in order to emulate 250ml chemical to 750ml water in a foamer. I saw in one of your other videos you premixing that same ratio into 25L drums and saying that these pre mixed drums were ready to use with the st 164 injector system. Just wanna know what beutels you’d setup to emulate this ratio. Thanks
So I use the .07 or 1% beutel for 100:1 which is what my super concentrates are designed for, or the 1.2 or 4% beutel for the ready to use prediluted strengths
Would this lance be best to use with the Suttner St-164 dual foam injector? Can you use stars and stripes with the ST-164 dual foam injector? Can you use the 5 gallon stars and stripes with the St-164 dual foam injector? Last but not least if you have a open carry utiliy trailer can you use the ST-164 dual foam injector the the foam and rinse lance you have here
The 5 gallon size is for predilution on foam cannons and normal power washer injectors however the st-164 can do that automatically, this is the complete kit you would want actually: www.chem-x.com/collections/touchless-washing/products/the-real-deal-kit-stars-stripes-edition
Yes the customer service does not help you get to try to call a day ago to give me a wash the best product you have a try to buy something but she not have any idea what I’m looking for