Underglaze Transfer Techniques for Pottery - Easy Trace and Transfer

Подписаться 40 тыс.

Просмотров 37 тыс.

50% 1

How To Learn Underglaze Transfer Techniques Is Easier than it looks. Follow along as I show you the Trace and Transfer technique📌ALERT - You Will See an Example Fired Piece! All the tools and Supplies needed are listed down below in the 👇 SHOW MORE SECTION 👇
-------------------------------------------------------------------------------------------------------------------------------------------------------
❓ Question
Have any Questions, Comments, or even suggestions for Future Videos
Feel Free to Post them in the Comments Section.
Don't forget to 👍 and Subscribe! Turn on Notifications (🔔)
-------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 Disclosure:
Some of these links go to my website potterycrafters.com and some are
affiliate links where I'll earn a small commission if you make a purchase
at no additional cost to you.
🎯 As an Amazon Associate, I earn from qualifying purchases.
-------------------------------------------------------------------------------------------------------------------------------------------------------
🔷 Tools and Supplies Used in The Video 🔷
Clay
✅ Amaco 38 stoneware White Clay
geni.us/AmacoS... (Amazon) (Blick)
Tools
✅ Tracing Paper
geni.us/anAce (Amazon)
✅ Soft Rib
geni.us/fU5F (Amazon) (Blick)
✅ Sponge Orange Absorbant
geni.us/SPhM (Amazon) (Blick)
✅ Dot Tool
geni.us/dnJlQg (Amazon)
Brushes
✅ Fine Detail Brush
geni.us/CMu1i (Amazon)
✅ Amagic Fan Brush Set- with Storage Case, Set of 6
geni.us/GDeD (Amazon)
Underglaze
✅ Speedball Underglaze 12 -2 oz Bottle Sampler Pack
Black, Orange, Purple, Pink, Medium Blue, and Yellow
geni.us/lQibvS (Amazon)
-------------------------------------------------------------------------------------------------------------------------------------------------------
🔷 Bonus Material 🔷
👉 Watch - How to Apply SANBAO CERAMIC UNDERGLAZE DECALS
• How To Apply Sanbao Ce...
👉 Watch - How to Bubble Glaze
• How To Wedge Clay - A ...
👉 Watch - How to Sponge Glaze
• Making a Berry Bowl B...
-------------------------------------------------------------------------------------------------------------------------------------------------------
🔷 Tools in My Studio 🔷
Hand Tools
potterycrafter...
Glazes
potterycrafter...
Brushes
potterycrafter...
Favorite Clays
potterycrafter...
-------------------------------------------------------------------------------------------------------------------------------------------------------
All Music potterycrafter... is used in strict compliance with the appropriate permissions and licenses required All Music is Licensed through artlist.io/ and in accordance with the RU-vid Partner Program, Community guidelines & RU-vid terms of service.
Sponsored videos and brand-sponsored content on this channel will be clearly disclosed within the videos and/or descriptions.
-------------------------------------------------------------------------------------------------------------------------------------------------------

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 206

@tarasayre1822 2 года назад

I so appreciate your teaching - topics, style, and energy. Thank you!!

@PotteryCrafters 2 года назад

You're welcome Tara. Thank you so much for donating to the channel. 😍

@CindyDyer-s8x 7 месяцев назад

I love this technique! Thanks for doing this video.

@PotteryCrafters 7 месяцев назад

You are so welcome!

@cleverclog-watchwonderwake1719 2 года назад

That was amazing, Marie! I was told I couldn't get my smaller drawings onto little plates that I made and I was feeling so sad....until....I came across this!!!! Your videos are fabulous and your manner of teaching is so soothing, encouraging and informative. Thank you, thank you! Your fan from India!!

@PotteryCrafters 2 года назад

India! That is most wonderful. Hi from Las Vegas. Thank you and you are so welcome! I'm glad I can help you to create some cool pottery pieces.

@muddyotterspottery569 3 года назад

That was so neat! I never knew you could do image transfer with tracing paper and pencil! I can hardly wait to try it. Thanks a bunch for posting this!

@PotteryCrafters 3 года назад

Cool ! It is fun to do. Thanks 😍

@kaylabourdon6793 2 года назад

This video is exactly what I needed to see. I finally can create all of my ideas !

@PotteryCrafters 2 года назад

That is great to hear Kayla. 😍

@kirbysidlo6877 2 года назад

Great ideas! I just started in Pottery as a retirement project. I really enjoy your informative clips. thank you very much.

@bettywest8191 Год назад

Wow this makes it so much easier and your detailed instructions are so appreciated. I love seeing the finished piece at the end. Thank you so much I will share this with my students and encourage them to watch your videos. Aloha

@PotteryCrafters Год назад

You are so welcome! Glad to help. Thank you Betty.

@saundragrenard3789 4 года назад

This is so much better than buying the transfers❤️thank you

@PotteryCrafters 4 года назад

You're welcome 😍 Let's get creative 👍

@dianemoore5985 3 года назад

This is a lovely idea! I'm going to try it soon. Also, I'm going to look and see if you have a video on embellishments slipped and scored onto mugs. Thank you for your great work.

@PotteryCrafters 3 года назад

Thank you Diane. You may be interested in this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yo9BryF71xo.html 😊

@Cnthpollard Год назад

Excellent teaching instructions. Thanks for all the videos.

@PotteryCrafters Год назад

You are very welcome. Thanks for watching. 😊

@annettenaru6989 3 года назад

I tried this technique today and the design went on the dish just like it showed. My problem was when I put on the underglaze and tried to wipe it off. The clay wiped out some of the design and smeared it. I see now that I needed to add and remove the underglaze in stages. I covered the whole design before wiping it off. This technique is a game changer….I can’t draw. Thank you

@PotteryCrafters 3 года назад

Yes, the underglaze can get tricking sometimes. Depending on your design. Did you try Underglazing when the clay is drier? You can also try Underglazing after you bisque fire. I have done it both ways. So glad this is helpful. 😍

@annettenaru6989 3 года назад

@@PotteryCrafters thank you

@robertdumoulin4612 2 года назад

Hi again Marie how many coats of undergleze do you apply on your butterfly. Thank you again.

@PotteryCrafters 2 года назад

Hi Robert. I only did 1 coat. This would depend on the thickness of your underglaze. If it looks too thin you can always apply another coat. 👍

@kupcads6470 4 года назад

I liked that. I was improvising the drawing process by hand. Sometimes there were mistakes. It will be very easy now. Thank you .

@PotteryCrafters 4 года назад

You're very welcome Kiran!😍 So glad it was helpful. 💖

@65kaki 4 года назад

Thank you so much! I love it! 😍👍

@PotteryCrafters 4 года назад

I'm glad you like it😊

@icbb2000 3 года назад

Man it’s amazing how many things you can do with pottery. I am so excited in trying this out in the future.

@PotteryCrafters 3 года назад

That's wonderful Sofia💖I know it's endless and so much fun. Leave a lot of room for you to be creative.

@vulcanswork 3 года назад

Thank you. I am the ultimate beginner, I followed your instructions step by step and IT WORKS perfectly. At first, I made an attempt on bone dry clay and that just does not work. Love this technique. Thank you again.

@PotteryCrafters 3 года назад

So glad it worked. It is a fun technique. If you would like to see more glazing techniques I have a playlist you can check out. Here's the link ru-vid.com/group/PLN-I0Hl1lbywms5nCbSUiS5ZWtDqf8SQI 😍

@KatAtkinson 4 года назад

Wow thank you for sharing this. Will definitely try it!

@PotteryCrafters 4 года назад

That's wonderful Kat. Glad I could help add another dimension to your pottery skills😍

@KatAtkinson 4 года назад

@@PotteryCrafters I am not a fine artist lol. I ment to pick up transfer paper while I was out today but forgot. Also congratulations on your jump in subscribers!

@PotteryCrafters 4 года назад

Thank you so much Kat. And thank you for your support 😍

@ourlittlebarnyard5379 Год назад

Thanks so much for this video! I'll definitely use this technique.

@PotteryCrafters Год назад

You are most welcome. That's great to hear

@jackiegrant410 2 года назад

Excellent, what fun!! Thank you. I’m 61 and learning to pot, but I’m very interested in the glazing process. This helps a lot.

@PotteryCrafters 2 года назад

That's great Jackie 😊 Welcome to the wonderful world of Pottery Crafting 😍 Glad I can help you on your learning journey. Here is a link you all my videos. ru-vid.comvideos You can select anyone that may help you.

@jackiegrant410 2 года назад

@@PotteryCrafters excellent, thanks so much. Enjoy your evening. ❤️🙏

@Positive8738 2 года назад

Nice vidéo and easy work..thinks

@PotteryCrafters 2 года назад

So nice of you. Thank you 😊

@mavisdavisify Год назад

I’m a little confused about the copied drawing. Did you use just a regular pencil or is it an underglaze pencil that transferred the design onto the tracing paper? I did not know graphite pencil would transfer like that so I’m a bit confused.

@PotteryCrafters Год назад

Hi Annie. Yes, I just used a #2 pencil. It works great for me. Just make sure you soak the transfer paper and press well when you are smoothing with your soft rib. 😊

@Spinquilter Год назад

Could Newsprint be used instead of Tracing Paper? Thank you

@PotteryCrafters Год назад

That is a good question. I have never used Newsprint. I think is worth trying a sample area and see how it turns out. If you do, feel free to share the results. Thank you. 😊

@mauriceroberts9471 Год назад

Amazingly clear. Thanks

@PotteryCrafters Год назад

You are most welcome!

@maryjeanallen6189 4 года назад

Marie, thanks again for another fantastic video! Looking forward to trying this out! So grateful for your teaching!

@PotteryCrafters 4 года назад

You are so welcome!💖 That's what I love about pottery you can create without having drawing skills 😍

@praptisaha8157 3 года назад

Thank you so much for teaching so honestly.It is a real help.Thankx once again.🌷🌹🌹

@PotteryCrafters 3 года назад

My pleasure 😊 So glad to help you come up some cool decorating ideas.

@knightclan4 2 года назад

Thank you for sharing your knowledge and experience

@PotteryCrafters 2 года назад

My pleasure! You're welcome Rick 😊

@julseab7813 2 года назад

Can I put underglaze on the mug first and transfer overtop to carve?

@PotteryCrafters 2 года назад

Very good question. You could but you would have to be careful because the underglaze could smudge when you apply the transfer over it because the transfer paper is wet. I think it is worth testing it out on a small piece of clay first.

@arabianwings8064 3 года назад

Thank you for this video. I cannot draw, at all, but I will try this. You make it sound easy and achievable.

@PotteryCrafters 3 года назад

Thanks, Gabriele 😊 That's great! You can do it. Start with a simple picture 😊

@evangeliemourouti 2 года назад

It was a very helpful video! Thank you very much!

@PotteryCrafters 2 года назад

Glad it was helpful! You are most welcome Evangelie 😊

@evangeliemourouti 2 года назад

@@PotteryCrafters 🙏🌺🌸🌺🌸

@janethundley3519 2 года назад

What is the dot tool you used to draw over your traced art work?

@PotteryCrafters 2 года назад

Good question Janet. I dot tool has a wooden or plastic handle with a small stainless steel ball end. Here is a link for you to check out geni.us/jSmEsJ 😊

@opheliaantekeier8104 Год назад

Once you transfer do you fire first then use the dot tool after it has been fired? I just want to make sure I understand.

@PotteryCrafters Год назад

That is a very good question. No, you transfer and then use the dot tool while the clay is still leather hard 😊

@vickivanriel3082 4 года назад

I love this. I'm going to do this!!!

@PotteryCrafters 4 года назад

That's great! 😍 Glad I could give you a another underglaze techniques 👍

@GypsyTheGoatOnTube 2 года назад

This is awesome, thankyou very much

@PotteryCrafters 2 года назад

You're very welcome Cynthia 😊

@jenniferbough6989 6 месяцев назад

My hardest part is design. I'm not really artistic. I can throw still beginner, but design. Any tips with how you get ideas? 💚

@PotteryCrafters 6 месяцев назад

Here is a link to my videos where I have different easy ways you can design your pottery. Like the split cups, bubble glazing, and splatter effect. 💖 www.youtube.com/@PotteryCrafters/videos

@karenwick2461 2 года назад

When you apply the underglaze, do you use more that 1 coat? (butterfly mug) TIA

@PotteryCrafters 2 года назад

It depends on what effect you want to create. I only apply 1 coat most of the time, sometimes 2, rarely 3. Butterfly mug only 1. Hope this helps 😊

@paulinesimpson1105 7 месяцев назад

Hi Marie. I tried this technique. I soaked the tracing paper for 1 minute and it dissolved.

@PotteryCrafters 7 месяцев назад

Oh My! That is the type of tracing paper you are using. some are thicker than others. Just dip the paper in the water. 😊

@dianemoore5985 3 года назад

Thank you! I'm excited to try this.

@PotteryCrafters 3 года назад

Wonderful! 😍 It is fun to do.

@elzy133 8 месяцев назад

I love this!

@PotteryCrafters 8 месяцев назад

Wonderful! Thank you 😊

@meenusubrahmanian5692 2 года назад

Hi Marie .. I found a low fire amaco glaze with the note as Safe for spray application. So can I not paint them ? Or dip in

@PotteryCrafters 2 года назад

Good question. Yes, you can dip or paint it on. The label is indicating that you can also spray it on. Some glazes can not be sprayed on because the particle size of some minerals in the glaze are too large for the sprayer. 😊

@RosesTeaAndASD Месяц назад

We just use soft white clay in my pottery class. Would this work on the wet clay? We are a special needs class and I'm trying really hard to learn and share things with my class. I'm sorry if my question sounds strange, but I am autistic and what may seem simple to others is often bewildering to me.

@PotteryCrafters Месяц назад

I think that's wonderful. I have a learning disability so I totally understand. That is a very good question. The wet clay will be too soft. You have to let it dry a bit until it is leather hard. Keep an eye the clay so it does not go past the leather hard stage. Here is a video on the 7 stages of clay that may help. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--kKcQBrqc7U.html If you have any questions feel free to ask. 💖

@artbecca2004 3 года назад

Thanks for sharing this technique! Can't wait to try... you made it so simple!

@PotteryCrafters 3 года назад

That's great 😊 It is a fun technique to do. Glad to help.

@vinsensiusguwanda8509 3 года назад

Thank You Marie

@PotteryCrafters 3 года назад

You're welcome. There are so many fun ways to decorate 😀

@marilynczech7692 Год назад

Can you also fire to cone 6 instead of 5? Thanks for this video.

@PotteryCrafters Год назад

Hi Marilyn. Good question. Yes, you can. I fire to cone 5 and put on a 20-minute hold. This is equal to cone 6 except it allows the glaze to a bit more. At least, that is what the tech at Skutt told me. 😊

@opheliaantekeier8104 Год назад

DO YOU FIRE FIRST PRIOR TO ADDING THE UNDERGLAZE?

@PotteryCrafters Год назад

Good question. You can apply the underglaze before or after you fire the piece. I do it both ways sometimes I will apply underglaze on greenware or after it is bisqued. If you apply it before you bisque make sure it does not touch any other greenware in the kiln because the underglaze will transfer onto anything else it touches. 😊

@colleenfitz6214 Год назад

Love your videos, learn so much. Am new to pottery and taking classes/studio time. I just have a question. I have a piece that has been fired once/bisque now. Can I do a transfer on a bisque piece? Hope this is not a stupid question.

@PotteryCrafters Год назад

Hi Colleen. Welcome to the wonderful world of crafting pottery. That is a good question. You can Not do this type of trace and transfer because the clay turned into a ceramic material after being bisqued and you can't etch into the pottery, but you can do an underglaze transfer. This video is done on bisque ware. Here is the link for you. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yo9BryF71xo.html

@denavess732 3 года назад

Love love this! Just learning and appreciate the helpful tips. Can’t wait try on my next day off! If you wanted colors to run some would you use different glaze? Or do you want them stay put on design. Trying understand this. Looks like color book

@PotteryCrafters 3 года назад

Cool, glad you like it 😊That's part of learning pottery. I had tons of questions, just like everyone else when I started making pottery 😊 Underglaze is made to stay put. It's mainly made of clay and colorant. Then you can put a clear glaze over the underglaze. You can check this video out. If you haven't seen this yet, it may help 😊 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sjL6JN88Kzc.html

@marymacdonald3506 Год назад

Hi can you put a background glaze color on before adding the transfer?

@PotteryCrafters Год назад

That is a good question Mary. I have not tried it that way yet. You can try it on a test tile and see if works.

@kylepark735 2 года назад

Thanks!

@PotteryCrafters 2 года назад

Thank you for your support Kyle 😊

@jonninat8077 3 года назад

very clever ideas!!

@PotteryCrafters 3 года назад

Thank you! 😊It really helps if you're not good at drawing. Like me 😃😃

@colettevarize4230 2 года назад

I was doing mine all wrong. Thank you so much! Can’t wait to try it!,,

@PotteryCrafters 2 года назад

You are so welcome Colette. I really like that technique. If you have time let me know how it goes.

@colettevarize4230 2 года назад

Marie. I tried this way and it didn’t work. Please tell me what I’m doing wrong. I did exactly what you suggested. Hmmm. I must be doing something wrong. 😊

@colettevarize4230 2 года назад

Maybe I’m using the wrong pencil.

@PotteryCrafters 2 года назад

Hi Colette. Are you using a #2 pencil? Sometimes I have put the transfer paper on the wrong side and the pencil mark was not on the clay.

@colettevarize4230 2 года назад

@@PotteryCrafters actually the pencil was not #2. Silly me. I’ll try again. Keep you posted! 😅

@LdF76 2 года назад

Awesome!

@PotteryCrafters 2 года назад

Thank you!

@cindykerkes1501 3 года назад

Great idea can you do this on Pottery that's already been fired for the first time

@PotteryCrafters 3 года назад

Thank you, Cindy. Good question. For this technique, you have carve into the clay, so it would have to be done in the leather hard stage. 😊

@OddballBre Год назад

This is great! Does this method work on paper mache ceramics?

@PotteryCrafters Год назад

Hi Breana. I know you can on paper clay but I'm not sure you with paper mache ceramics. You could do a little test sample. 😊

@patriciadapkus4760 2 года назад

Marie, have you tried bisque firing your carved piece before underglazing? The process after that is the same but the black in the carved lines stand out better.

@PotteryCrafters 2 года назад

Yes I have done it both ways with great success. I think the time to apply the underglaze is the way you like to do it. 😊

@ProudParent 3 года назад

Does this transfer technique work for bisqueware?

@PotteryCrafters 3 года назад

That's a great question 😊 Yes you can. The pencil lines will transfer onto the bisqueware and you can draw the underglaze on. The pencil lines will burn off in the kiln. However, you can only carve into the transfer design when it's leather hard (like inlay) then underglaze after it's bisqued. Like in this honey jar video. Check it out at 12 and a half minutes in and 21 and a half minutes. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MWRja_GDIhA.html There are so many cool ways you can decorate.😊

@olihoxhaj2021 2 месяца назад

Hi, thank you so much, i have a question.Can i put underglaze without carving it?

@PotteryCrafters 2 месяца назад

Good question. Yes you can! 😊

@dragonboatphoenix6375 8 месяцев назад

Hi Marie, great videos, thank you for sharing! My question is, is there any risk of cracking a pot if I were to apply the underglaze at the bone dry stage?

@PotteryCrafters 8 месяцев назад

Thank you! Very good question. I have underglazed on bone dry clay many times throughout the years. There is only a risk of the pot cracking if you do NOT handle it very carefully. Don't hold it with a lot of pressure or uneven pressure (like grabbing an edge of the pot with one hand). And be careful not to hit it against anything. Happy Glazing!

@dragonboatphoenix6375 8 месяцев назад

@@PotteryCrafters hi Marie, Thank you for your prompt reply, I will try it then with your precautions! Much appreciated! 💕

@denisebooker6130 3 года назад

Hi there from new Zealand. Can you use any kind of pencil. Love your video. Very helpful.

@PotteryCrafters 3 года назад

Thank you Denise. Great question. 😊 Yes you can because the pencil marks will burn off in the kiln.

@jillkaplan393 2 года назад

Thank you so much on your reply and have watched the. Idea you recommended. I’m not a great drawers so this is perfect for me, along with using transfers. Would you mind sharing where you found the utensil drawings? They’re perfect for the utensil holder my husband keeps asking me to make. Thanks. Jill Kaplan

@PotteryCrafters 2 года назад

Glad it was helpful! 😊I'm sorry I can't remember where I found it. You can look up kitchen utensil drawings. Hope you can find it. I like that design too. 😊

@Maya-rx4wm Год назад

Thank you so much for another informative video. I can’t wait to try this! How many layers of underglaze did you brush on for each color? It seemed like only one… am I correct? TIA

@PotteryCrafters Год назад

That's great. Yes only one coat. If the underglaze looks thin I will apply 2. 😁

@Maya-rx4wm Год назад

Thank you ❤

@loryb5024 3 года назад

I have a question about adding underglaze on leather hard pieces.... I think I may of made the mistake and added the clear coat over the underglaze on leather hard piece. Will that ruin with only one firing? It is not a functional piece, it is for decorating... So did I completely ruin the pieces by doing this??? Your video was excellent tutorial and I learned that applying the clear glaze after the bisque firing is the proper way to do this.. Please let me know what I should expect... Thank you! :)

@PotteryCrafters 3 года назад

Very good question Lory. Your piece should be fine with a single fire. It is very important to fire your piece at a slow heating rate. This will allow the gases to escape. This post will help answer the question more in-depth. Here is the link potterycrafters.com/do-you-glaze-pottery-before-or-after-firing/ then go to - Can you fire pottery once?

@carolynpollack1083 10 месяцев назад

Hi. You said you used Speedball. I know it's underglaze, but how does it differ from ordinary underglaze. Also, how many coats did you have to apply?

@PotteryCrafters 10 месяцев назад

Hi Carolyn. Good question. I use Speedball and Spectrum underglazes the most. They are both ordinary underglaze. For this video, I only applied 1 coat. I will apply 1 to 3 coats depending on the look I'm going for. I don't want to apply the underglaze too thick. Happy glazing 😊

@robertdumoulin4612 2 года назад

Hi Marie when you put your under glaze on a draw subject did you apply 2 coats or une is ok.

@PotteryCrafters 2 года назад

One coat works for me most of the time. If it looks too thin I will do 2 coats 👍😊

@annewatkis5824 6 месяцев назад

I want to put an Irish harp on my plate. Do I just follow your process?

@PotteryCrafters 6 месяцев назад

Yes. I bet that will look GREAT! 😊

@joswinton7359 2 года назад

Does it have to be leather hard. Can you transfer in green ware?

@PotteryCrafters 2 года назад

Good question Jo. If you want to carve into it. Yes. You can do it on bone dry clay but no longer carve, instead, you can transfer the same way and paint it with underglaze and bisque fire. 👍😊

@mayrapuche3828 2 года назад

La taza esta en estado biscocho o en cuero

@PotteryCrafters 2 года назад

It is leather hard so I can carve into it.😊

@diananesbitt1260 3 года назад

I'm sorry. I missed the beginning. Was this a regular pencil or an underglaze pencil.actually, I missed a bunch. Something is wrong with my eyes and I'm having trouble seeing. Maybe my ears too. Who knows. Really love your work.....when I can see it. Thanks so much.

@PotteryCrafters 3 года назад

Thank you, Diana. I used a pencil to trace and a Dot tool geni.us/dnJlQg (amazon) to draw or inlay on the pattern that was tranfered on the pottery. The pencil marks burn off in the kiln. 😍

@maestasify 2 года назад

One can use a pencil on the lines on the transfer rather than rubbing it with a rib, especially since you are carving the line on to the clay. The pencil will make a groove where the carving tool can run in.

@PotteryCrafters 2 года назад

Very good question. Yes you can try it. I tried it to save a step and it didn't work for me, But it may work for you. 😊

@kirpnat9076 2 года назад

Muchísisisisimas gracias 😭😭😭😭

@PotteryCrafters 2 года назад

You are most welcome 😊

@bmora5610 3 года назад

Hello I'm a beginner in ceramics and would like to try this technique. I saw the list of items recommended but didn't see the type of pencil used. Is there a specific number or graph pencil to use or any type is good? Thanks Barbara from Wrightwood

@PotteryCrafters 3 года назад

Welcome to the art of pottery crafting. Good question. No the pencil type does not matter because it will burn off in the kiln. 😊

@marianagh1939 3 года назад

HI can I use this transfer technique in earthenware bisque ?

@PotteryCrafters 3 года назад

Hi Mariana 😊 That's a good question. Yes you can. Happy glazing 😀

@heididerksen8227 3 года назад

Also can you paint underglaze on greenware??? If you can help that'd be great.

@PotteryCrafters 3 года назад

That is also a great question. 😊Yes, you can. I do it both ways and they turn out really good both ways. If it's greenware just make sure it doesn't touch your other pottery in the kiln because the underglaze will transfer over to the other pottery.

@hilalgunes1646 8 месяцев назад

Marie, Is this mug biscuits form?

@PotteryCrafters 8 месяцев назад

When I underglaze it is.😊

@ahafun2010 Год назад

Thank you for another great video with good information! Don't think you mentioned how many coats of underglaze you used - normally I thought 2-3 coats were necessary, but life would be easier if 1 coat would do for something like this! Your mug looked great at the end - so if that is one coat per color, I'd be happy! Did you just use the one or show us the first coat and then sneak and do the other coats?

@PotteryCrafters Год назад

Hi Susan. Ha, Ha, you're cute 😀 Yes at the time I was using Amaco clear glaze, and it was thick. So I only applied 1 coat. If I use too much it gets milky looking, and I was getting crazing. I didn't like the Amaco clear glaze, so I switched to Speedball clear glaze and apply two thin coats. That works best for me, and no Crazing. 😊

@ahafun2010 Год назад

@@PotteryCrafters okay, that helps....I think....I got the part about the Speedball clear glaze after the bisque firing, but how many coats of the colored underglaze on the leather hard piece before the bisque firing?

@PotteryCrafters Год назад

Hi Susan, Sorry about that. I read it wrong. Being Dyslexic, My eyes play tricks on me. Thank you so much for asking again. Yes, I only use 1 coat, sometimes 2 If the underglaze does not look like it has covered. That's still funny 😊

@ahafun2010 Год назад

@@PotteryCrafters oh, thank you, Marie, for taking the time to keep answering questions. I am very much a newbie, and your videos have helped me more than you can imagine. You are an excellent presenter, by the way, and your videos are not only very enjoyable, they are very professional. You have a great smile and great speaking voice, and you make pottery seem accessible to folks who are willing to keep working and practicing and learning new things. This is encouraging! And it really helps to know which brands of things experienced potters have found to be the best for various things. Keep making videos!!

@PotteryCrafters Год назад

Thank you so much Susan. Happy to help. If you have any questions or suggestions for a video feel free to let me know. 😍

@jeanward4647 3 года назад

Hi! Where can I find transfer paper and the tool that used to carve this butterfly? You also mention cone 4 can this be fired at cone 6? That is what we have in our class --- cone 6. Please be so kind and respond to this message!! Thank you!!

@PotteryCrafters 3 года назад

You're welcome Jean 😊 you can get the Tracing Paper here geni.us/anAce (amazon) and the Dot Tool here geni.us/dnJlQg (amazon) yes your underglaze should fire to cone 6 with no problem, just double-check the firing temperature on your underglaze bottle. Happy glazing 😍

@superawesomecoolmom 3 года назад

Do you sell your pieces online? My 3 and 6 year old daughters are obsessed with this cup!

@PotteryCrafters 3 года назад

That's great thank you very much. 😍 I'm looking to hopefully in the near future.

@handmadepottery2135 3 года назад

Great idea. Is that normal tracing paper? I'm having problems leaving the image on the pot, even with the softest pencil.

@PotteryCrafters 3 года назад

Thank you. 😊 Yes, it is. Try leaving the tracing paper in the water longer, use a soft rib to press the pattern in the leather hard clay, and leave the tracing paper on the clay a little longer. Hopefully, this will help your pattern show on the clay for you.

@handmadepottery2135 3 года назад

@@PotteryCrafters Thank you.

@bodiddley2998 4 месяца назад

Can you do this onto bisque ?

@PotteryCrafters 4 месяца назад

Yes I have transferred on to bisqueware. Make sure the transfer paper is wet and give the pencil marks time to transfer onto the bisqueware

@heididerksen8227 3 года назад

Hello I have a guestion or 2 wondering just starting out in pottery and after you underglaze your bisque fired piece can you glaze over it or do you have to fire it first then glaze and fire again

@PotteryCrafters 3 года назад

Great question Heidi 😊 Yes you can glaze over it I have an underglazing video. Here's the link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4rvjVIlt5A4.html 8:45 minutes in, where I glaze over the underglazed pottery.

@sylviefeys744 2 года назад

Hello Marie, so underglazes and glazes can be used on leaderhard clay??

@PotteryCrafters 2 года назад

Good question Sylvie 😊 Yes you can with underglaze. But glazes are a bit more tricky. This post will help explain. Here is the link for you potterycrafters.com/bisque-and-glaze-fire-pottery-at-the-same-time/

@sylviefeys744 2 года назад

@@PotteryCrafters thank you so much Marie. I have learned a lot from you and i will keep learning from your video's as a beginner. I just both myself my first kiln as well. Have to wait till februari to be delevered. So i'm learning all i can to start my glazing journy. And not just the weel for a year now ... Greetings from Belgium

@stutzbearcat8425 3 года назад

Can this be done with clay that has fully dried and been bisqued?

@PotteryCrafters 3 года назад

Good question. You can apply the underglaze when it's bone dry or even bisqued. But you have to do the trace, transfer, and carving when it's leather hard. 😊

@stutzbearcat8425 3 года назад

@@PotteryCrafters okay thank you!

@marybias262 3 года назад

I was wondering if this technique only works with the speedball under glaze? I use amaco velvet under glaze. Also how many coats do you apply, and would this also work for bisque fire at cone 6 and high fire at cone 10?

@PotteryCrafters 3 года назад

Great question Mary Yes you can use any under glaze 😊 Did you mean cone 06 for bisque? I bisque fire to cone 04 after I carve. You can apply the underglaze before or after you bisque fire. I know you can push it with underglazes at cone 10 but low to mid fire are best. I do 1 maybe 2 coats and my underglazes turn out great. I also use Amaco underglazes.

@homecafe7782 3 года назад

Pls show us how to glaz and fire

@PotteryCrafters 3 года назад

Thank you, very good request. This may help right now. I show the glazing processes over underglaze in this video here's the link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6ly8kDDX2Ww.html Also this loading the kiln video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LsZM6bUmKOc.html And Programing ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c_CeGd7UTio.html. Until then I hope this helps.😊

@UptownGirl_ 3 года назад

Hi Marie/pottery crafter, may I know if underglaze temperature must be similar with the cone of the clay? Or will it be okay to have a different temperature for bisque firing? I have limited access to underglazes but I can't seem to find underglaze that are for the same temperature/cone of my clay.

@PotteryCrafters 3 года назад

That is a very good question. No. I have bisque fired my underglazes to cone 04 then fired my underglazes all the way up to cone 6 using a high fire clay with no problems. The only time it can get tricky is if you fire to cone 10. I have done that also and the underglaze color came out darker than what I would have liked. You can check out the underglazes on my glaze page potterycrafters.com/recommended-tools-best-glazes/ They have all been fired to cone 6 with no problems. 😍 Hope this helps.

@UptownGirl_ 3 года назад

@@PotteryCrafters hello, thank you so much that was very helpful! Hoping you'll make an underglaze q&a soon 💗

@tammyhodges95 3 года назад

Hi Marie, thanks for this demo. I do have a question. I had a mug bisque fired. I added the art with coyote underglaze and dipped it in clear glaze. Then had it fired again. When I got it back, in all the areas I painted the underglaze is rough. The rest of the areas the clear glaze is smooth. Do you know what would have happened and can I dip it or brush a clear glaze over the whole piece and refire. ? It was coyote clear glaze that I dipped it in. Does it have to be coyote clear glaze or can I use any clear glaze like Amaco? Brush on. Thanks for any advice.

@PotteryCrafters 3 года назад

Hi Tammy. Glad to see you are still doing pottery. Hope all is well.😊 That has happened to me before. It is most likely the underglaze. If you used 2 colors and they both turned out that way, You can try applying the clear glaze over it again, and refire it may work. If not the underglaze is bad and that does happen from time to time. Mine was a small bottle of red. I did a test firing with it and a blue underglaze the blue turned out perfect and the red was rough. Let me know if you have any more questions.

@tammyhodges95 3 года назад

@@PotteryCrafters wow! I didn’t think it could go bad. I haven’t had it really long. I’m gonna buy some stroke and coat maybe I’ll have better luck. It happened on 2 pieces and I did mix colors for green and 1 was red. Thanks for your help. Have a wonderful weekend.

@PotteryCrafters 3 года назад

Thank you, Tammy. The underglaze doesn't go bad. It's just that sometimes there is a bad batch. It's only happened to me once so far with the speedball red. My friend got Stroke and coat and really likes it. I think I will be trying it also. Let me know how it goes. 😊

@tammyhodges95 3 года назад

@@PotteryCrafters oh, I see. Thanks. Sure will.

@samanthanicholson9015 3 года назад

Where can I get mason colors for clay/slip

@PotteryCrafters 3 года назад

Hi Samantha, I get them on Amazon. Here is a link for you to check out different the colors geni.us/wIXqYcz 😊

@samanthanicholson9015 3 года назад

@@PotteryCrafters I found it but it won't open , that stain can be bought for a pound for 13$ at NM clay. Check them out to

@PotteryCrafters 3 года назад

Once you click the link you would have to click the Amazon Logo. 😊 Thank you for letting me know. I will check it out 😊

@samanthanicholson9015 3 года назад

@@PotteryCrafters how much color do you add for the clay?

@PotteryCrafters 3 года назад

That is a very good question Samantha. I have video on making colored slip. Here is the link for you. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-95KkiwlOOko.html 😍

@sidrasalman4683 6 месяцев назад

Tried exactly the same technique but it didnt work :(

@PotteryCrafters 6 месяцев назад

So sorry to hear that. I do this technique all the time, I wonder why it didn't work for you.

@sidrasalman4683 6 месяцев назад

@@PotteryCraftersThe image transfer did not work. Even though I soaked the image for quite sometime.

@PotteryCrafters 6 месяцев назад

Thank you for letting me know. It could be the paper or it could be the graphite in the pencil. Do you know the pencil? # 2 pencils have graphite and clay in them.