Unique Idea!! Car Stand From An Old Car Brake Disc! 

DANGEROUS!!!!!!!!

私はあなたの製品が本当に好きです、素晴らしいアイデア

Тормозной диск вообще-то хрупкий и ломкий, если опереть его на нервную поверхность и дать нагрузку этой стойки, то с высокой долей вероятности он треснет.

Grande!! Aproveitou bem as peças!! Parabens!!!

All the weight is carried by the shear force of a standard bolt. AMAZING!

Ждал концовки думал ну щас полетит😳не не полетело 😕. Диск тормозной там лишний😁

I work under cars all day every day - keeping them "up" is a necessity. I use 4 18" wide, 18" high cut rounds off a tree-trunk. Been using them 4 rounds for years now. I have a lovely shiny 2-post lift - that don't work for what I do - I repair rust, so the lift is almost always in the way of what I want to get at - so the lift gets little use. The lumps of wood do. I sit the front lower balljoint bolt onto the wood so it sinks in - that'll never slide. The rears, I jam the timber in under the axle. Never gonna move. If you don't fancy using lumps of solid wood (which work great btw) then buying axle-stands isn't exactly exorbitant - they're pretty cheap off the shelf. No idea why anyone would fancy making their own - they're peanuts to buy. But lumps of wood are safer - there's no chance of them falling over, metal on wood doesn't slide like metal on metal does & there's no welds to break or pins to forget/shear whatever. If I'm in under a 2 ton jeep or a 5 ton bus - and I'm gonna be in under there all day today, all day tomorrow & maybe even a bit of the next day - I want to be sure it ain't gonna fall on my head. 4 big rounds of tree-trunk give me that guarantee. I still bang in 2 4 ton trolley jacks - one fore, one aft - just as insurance. If I was relying on a contraption I welded together, there would always be that niggling doubt - "Did I dun goof on 1 weld?"......

Самая устойчивая стойка из трёх ног. Уверенно будет стоять даже на неровной поверхности. А это, так... на ровном полу только использовать.

Excelente!!! 👏👏👏👏👏

Exelente proyecto!! Muy bueno!!

Interesting build. Wouldn't trust it in the end position though.

Yes. 3 legs more reasonable and easy making. Very old construction my father had in Soviet Union even in 1975...

Bom de cabeça , ficou joia!!

Muy bueno, es la primera vez que veo un trabajo con un disco de frenos qué sirve para algo más que doblar hierro, como todos los proyectos en RU-vid con discos de frenos solo hacen dobladora de hierro. "exelente " tu proyecto .

Great for a tent anchor.

as a hobby, it's great. store bought ones are cheap and just as strong.

A very good way to explain and the job is realistic. Good video, thanks.

PARABÉNS PELAS IDÉIAS! GOSTEI MUITO E ALÉM DE ÚTEIS MUITO SIMPLES E BARATO PARA FAZER. NOTA 1000

Now can you imagine if there was an actual item for this that's sold in shops

Mjeshtër me fantazi teknike ,të lumeshin duart e arta .,faleminderit.

Increíble e impresionante que bueno

Good idea & well made 👍

فكرة تخبل وعاشت ايدك تحياتي من العراق😮

This is a good idea recycled old parts 👍👍

👍brillante idée 💡 bravo

Ich habe die Bremsscheibe in die Kreissäge eingespannt, und mit Sandpapier war die wieder fit.

Excelente idéia!! Ficou muito seguro e resistente. Parabéns 👏👏👏👏👏

Crei que fuy el único que lo realizaba jajajaj saludos amigo que buen. Video👍👏

Parabéns! Você mostra com clareza que não falta trabalho!!!

Диск то из чугуна, хрупкий.

Nice build, looks stronger than the stands from the auto parts store, the #6 hole might be a bit sketchy tho, you keep a clean workshop, well done!

Идея хорошая, но таскать в руках 10 кг ? Купил готовые 2 штуки, легче и удобнее!

Nice to see you used cap nuts to neaten the bots. Nice build.

If it’s all dead flat that’s great. I prefer a three point contact.

برافو عليك مبدع فكرة جميله

Great idéia.... fantastic Work!

Excelente idea..muy útil como herramienta para mantenimiento del vehículo.. saludos desde Venezuela

Boa idéia

non solo bravo, ma BRAVISSIMO!

Super bien

Excelente trabajo felicitaciones 👌👍👍

Very nice Thank You!

Ticking time bomb, cast iron brake disc crazy 😂

Shorosheya's idea cool work 👍👍👍

Muito bem parabéns pela ideia bem bolada

فوق العاده بود، لذت بردم

It's also mucho heavyoso

4x100, 56mm, Honda i think😁

No sólo para soportar coches ya que, también, puede servir de caballete y darle muchos usos. Enhorabuena y gracias

SUPER!!!!!!

Beau travail 👍👍👍🇲🇫

Gostei muito

Great idea!

Gostei show.tenhi dois disco de ix.35 Vou fazer igual

Молодец хорошая штука , класс.

Que trampo profissional 👏👏👏

I agree with you . The brake rotor has been designed to hold the weight of the vehicle. The concern is at the weldment because cast iron can be brittle at the weldment. I see that the bolts are for assisting the load and are in the correct location by design. Also the steel pipe holds weight in the center from the car to the ground. I may have used everdor rod or even silicon bronze as a weldment filler to avoid any brittle weldment

Espectacular!!!!!!!

The first job this stand should be part of is to hold up a car safely that is changing its rotors so we can make another!

Thanks it helped me install it

Super! From USA

Прикол в том что материал из которого изготовлен тормозной диск очень хрупок и он обязательно сломается при незначительном перекосе если поддерживаемое изделие покатится

A menos que su tiempo no tenga valor sigue siendo más económico y seguro comprarlo que hacerlo

Отлично зделонна

Danger!!!

Excelente idea . felicidades desde Costa Rica saludos

QUE CALIDOSO!!

Good work

I would worry about the disc. Over the years I have spent in the trade I have seen several discs shear from the centre due to wear or impact. so I think I would be a little nervous in case there was an uneven load on the base.

excelente idea 💡 amigo tengo que cambiar amortiguadores de mi auto y estoy pensando hacer un prensa espirales en mi canal gracias por compartir 😊 saludos desde Argentina 👍

Pas mal pour soulever une voiture 🚗 super sympa bravo 👍 👍🎃

7:40 Te profile nie służą do podnoszenia i podpierania samochodu!, one pełnią tylko i wyłącznie funkcję usztywnienia płyty podłogowej, poza tym stojak świetnie wykonany, no poza tym iż dałbym z 3 cm więcej zapasu rury pod ostatnim otworem :)

Крутая идея -- е....стись целый день, докупить кучу инструмента, при условии того, что в магазине стойка копейки стоит.

You really good at explaining thank you

Beautiful

Excelente. Bendiciones desde chile.

Bravo!

Es lo mas fabuloso que e visto asta el día de hoy, felicitaciones amigo, dios le bendice 🤝🏻🙏🏻

Bravo.

Vraiment super et la finition avec le pneu c’est top bravo

Marvelous.

This is amazing project sir... Thank you for sharing 👍👍👍

Bravo bella idea italia

Dziękuję! Wykorzystam ten patent po małych modyfikacjach do jeszcze wielu innych rzeczy w ogrodzie, szopie, garażu.

Fantastic for an apprentice at college, or as a d.i.y. project.

При боковой нагрузке (к примеру при поддонкрачивании второй стороны) чугуняка может лопнуть в тонком месте. Интересно, но нужны испытания на излом.

Simples e muito bom.

Thank you very much for your key......1000% work :)

Thank you.

Very gud

moi je fais pareil pour soutenir ma voiture, mais avec 2 parpaings, c'est plus simple.....😁

Excellent idea and a great job. For those of us who don't have the necessary tools and equipment will have to go to Harbor Freight.

❤🎉❤ thật tuyệt vời

ahh....i miss your stick welding...BTW thats a great product

20/20

Bravo tie

Самая устойчивая опора на трёх точках.

Exelente 😂👍

Great job 👏

Muito bom, parabéns