I just wanted to say THANKS!! I have watched so many of your instructional videos and literally play and pause to do the same tasks you are doing. So far you helped me with the remote DS injector, the DIY propotioner and now this K1 unloader setup - you are awesome, thanks! I owe you a ginger ale if we ever meet :)
Mike, thanks for the kind comment. Comments like yours makes everything worth while! Helping people out to be more efficient and giving back. I would love a ginger ale if we ever meet up. Thanks Brother!
I have two questions. First, where did you get the nice round gas tank? It is hard to find a good tank. Second, I read that the flow release type unloaders such as the ZK1 don't work well when down-streaming, so I am wondering is you are able to successfully turn chems on or off when house-washing by changing tips?
I had the gas tank made from the company in the link. They dad an awesome job. I also had 2 drop tubes to add another machine in the future. I have not had any problems down streaming with my ZK1 unloader. Thanks www.spunaluminumgastanks.com
Great video, I’m wanting to put these k1’s on my 4 and 8 gallon machines. Did you have to mount the unloaded that way? Could you have attached it to the machine the way the original unloaded was mounted? I didn’t catch as to way to bolted it to the frame. Thanks
Question: On the unloader bypass hose line. You mentioned that you changed it to 1/2" hose. Is that the size of the inside diameter (I.D.) or the outside diameter (O.D.) of the hose? Does it make a big difference?
It has been working great. I thought the same thing about my 4 GPM when I first got it. It will not be long before you want to upgrade to more flow. Thanks
I'm about to put the zk1 on my 8.5gpm 3500psi pump. The guy at the local pressure washer store says sometimes they have issues with running long lengths of hose (300' on my reel), extension pole, and downstreaming. I was wondering if you ever run into it acting weird at any time. Can you use your ball valve for rinsing ok. Just wondering if there is anything i need to watch for or behavior i might need to change. I hate the thought of getting on a job and finding out the hard way. Thanks.
Great video question I want to change my unloader to a Gp K7 to take away the kick when the trigger is engaged, I am running a Honda GX 690 3000psi pressure washer. At idle what I should see on my gauge? and what should I see when the trigger is in gauged thanks
Great video! I have a question for you. I noticed you have a drip coming from unloader. When I installed my k1, I bought specialty bsp to npt adapters just to make me feel better about threading everything together. My unloader works great and I love it but from day one it has leaked where the unloader goes into the block and I can’t get any answers whether this is ok or whether it needs to be addressed and how. I used blue monster tape and a little bit of tru blue over threads which has never leaked on me before. Any feedback would be greatly appreciated!
Our unloader on the big machine leaks as well. I have not noticed any difference in performance from the machine. We used tru blue sealant, but it still leaks. Since it is just water, we have not tried to stop the leak since it so small. I hope this helps. Thanks
I installed the K7.1 unloader and adjusted accordingly and everything is working properly. When I idol down the machine I am getting a hard surge on the bypass line, when I idol back up it goes away. What can be done to fix this issue? Thanks
@@MikeWho_MikeJones I understand what a bypass and chemical bypass is. At 12:15 is what I’m talking about. Why are you checking for a trickle of water from the bypass line?
I perfer the soft touch unloader instead of the pressure unloaders. The benefit for me is not having a blast of pressure when you pull the trigger. Thanks
@@bananacakes8939 Agreed! I have not any problems forcing the threads. Not saying it is the correct way, but that what I learned when installing mine. Thanks
@@allproexteriorservicesllc5338 what is the correct orifice for adjusting that unloaded, I’m thinking of doing the switch out myself? Also can that zk1 go on a 5.5 ?
@@joeplume8048 Yes, the ZK1 can be used on a 5.5 GPM unit. Just make sure you get the one that meets the GPM. You should used any color spray tip for a 5.5 unit. Thanks