No video :(

Unlock The Secrets: Mastering Tonex Tone Models From Setup To Capture!

Подписаться 42 тыс.

Просмотров 4,3 тыс.

50% 1

#tonexpedal #tonex #ikmultimedia
Line 6 Marketplace Presets: bit.ly/line6ma...
Helix Ultimate Complete Presets Vol. 1-7: bit.ly/3xuAD30 (NEW)
Helix Ultimate Complete Presets Vol. 1-6: bit.ly/3IRjVwz
Tonex Tone Models: bit.ly/tonexpr...
Tonex ToneNet Tone Models: bit.ly/3JosdwY
Quad Cortex Presets & Captures: bit.ly/4dFDG92
Kemper Rigs/Profiles: bit.ly/3shWRTe
IK Multimedia Affiliate Links:
Tonex Pedal: bit.ly/40XKEj7
IK Multimedia Amplitube 5: bit.ly/3y02IfR
IK Multimedia Tonex: bit.ly/3Srb0pc
Join this channel to get access to perks:
/ @jasonsadites
By far the biggest request I receive is to do a video showing step by step how I go through the Tonex tone modeling process. In this video I go very in depth into the process I use and show you everything you need to understand to make consistent models that will give you out what you put in. I really hope you enjoy this look at the process and I hope you enjoy the tone models!
Life Child Ultimate Tone Models: bit.ly/4bUWtvU
Video Concerning Raising Instrument Input Too High: • Do You Want Better Mod...
Properly Set Your Tonex Input Level: • Fine Tune Your Tonex P...
As always, thanks so much for watching...
Please visit my sponsors:
Line 6: www.line6.com
Vigier Guitars: www.vigierguita...
Toontrack: www.toontrack.com
Mission Engineering: www.missionengineering.com
Morningstar FX: www.morningstar...
Temple Audio: www.templeaudio...
0:00 - Disclaimer
0:12 - Introduction
1:07 - What We Will Discuss In This Video
2:57 - Setting Your Instrument Level Properly
5:04 - Setting Your Reamp Output Level Properly
11:48 - Starting the Modeling Process
12:16 - Modeling Process Step 1: Intro
12:30 - Step 2: Instrument Selection
12:36 - Step 3: Tone Model Type
13:27 - Step 4: Audio Setup and Rig Connections
15:24 - Step 5: Input Level IMPORTANT
19:09 - Step 6: Send Level IMPORTANT
20:25 - Step 7: Return Levels IMPORTANT
22:34 - Step 8: Capture
23:12 - Step 9: Setting Accuracy Level and Training
24:34 - Step 10: Audio Setup and Rig Connection for Tone Model Audition
24:53 - Step 11: Tone Model Review
25:44 - Step 12: Customize Your Tone Model
26:09 - Step 13: Naming and Tagging Your Tone Model
26:53 - Step 14: The Finished Product
27:25 - Does My Method Actually Work? IMPORTANT (WITH AUDIO)
37:26 - Conclusion
39:04 - Life Child Ultimate Tone Model Audio Demo

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@marcohermans3207 5 месяцев назад

A great and very smart video!! This is a must see video for everyone who's capturing. I hope all the third party vendors look at this and hopefully are starting to use the same settings because sometimes the levels are all over the place. They say that it's not possible to provide us users with numbers because there are a lot of other factors involved, discussion closed.... You proved them wrong with this video IMHO.I hope this method will set a "standard". You do a marvelous job.

@JasonSadites 5 месяцев назад

Thank you so much Marco and really glad you enjoyed the video 😀

@daustin777 5 месяцев назад

I was hoping you'd do this video. I've been planning on redoing my captures with a new mic acquisition. Looking forward to the Omega capture.

@JasonSadites 5 месяцев назад

That's awesome and I really hope it is helpful 😀

@Axman66 Месяц назад

+++ dear Jason, I can´t thank you enough for this highly scientificly sofisticated explanashion+++ i was following the debate from the beginning on and also the reaktions of some guys in their videos. Finaly this is the proof and the ultimate Answer for all "input Trim" Questions. i just made my first Capture right before i saw your video, no i see much clearer what i made wrong. I am 58 years old and do recordings on PC since 1990" ish". I am using my Tonexpedal in Loop in my Helix and my Marshall JVM +412 i love both worlds 🙂. Thank you so much Jason for all i learned from You. Greetings from Hannover Germany.

@2550marshall 5 месяцев назад

Thank you! This took a lot of time and I really appreciate that you took your precious time to show this.

@JasonSadites 5 месяцев назад

Totally my pleasure and really glad you enjoyed 😀

@calebmoore7079 5 месяцев назад

Recently came into a tonex on a trade. Excited to profile some of my amps! This was very informative and I really appreciate your detailed and thorough approach. All good stuff!

@JasonSadites 5 месяцев назад

Totally my pleasure and glad you enjoyed!

@BillySoundFarm Месяц назад

This video, and the tonex 'capture' process... it's the most effective commercial for Kemper I've ever seen in my life

@silverbeetle 5 месяцев назад

Fantastic video - I'd been messing around with my gain staging for a while but never got to the level of a multimeter - brilliant! Please do an Amp DI capture video, would be great to see what other tips you have there.

@JasonSadites 5 месяцев назад

Thank you so much! Really glad you enjoyed :-)

@felixcorell9856 5 месяцев назад

Fully agree that the approach makes sense, and I would also love to see more third-party vendors (or even stock captures by IK) following a similar standard and provide their input level metadata. In the meantime, am I right in assuming that if I have set my input level relatively hot to sound good with stock captures, if I then load one of your tone models, I would have to turn the gain (or equivalently, input trim) down for them to sound authentic (i.e., as captured by you)?

@JasonSadites 5 месяцев назад

Yes I agree, it would be nice to have actual numbers from vendors! You are correct in what you say about getting my tone models to sound as I captured them if you are cranking your input gain higher. For instance, on Tonex pedal, an Input Trim setting of -3 dB will sound identical to how I captured. If your Input Trim was set up around +8 dB for instance you could simply turn your Gain knob on the tone model/preset down to around 3.0 or so and get a very close sound. Hope that helps :-)

@RKBibleStudy 5 дней назад

Have you experienced the “silent recording please check current audio settings“ message? And if so, do you know how to solve it. I matched sampling rates with my audio interface, which is an Apollo. It let me do a couple of profiles, and then it suddenly stopped letting me and nothing has changed as far as signal flow. I just thought I’d ask, because I have not been able to find a definitive answer online. thank you in advance.

@mattcgtx4809 5 месяцев назад

Awesome as usual ! I am not as technical as you at this point so bear with my questions. If I buy your captures what is required on my setup to have them sound as intended? Also would be awesome to hear your ideas on stomp captures. For me it would be great to capture my analog settings on my OD pedals > ToneX pedal, then I could integrate those with midi type snapshots for complete rig one press type setups😎

@JasonSadites 5 месяцев назад

I will likely do a video on DI and pedal captures in the future :-) For my tone models to sound identical to how I captured them, on Tonex Pedal you should set your Global Inpout Trim to -3.0 dB. Hope that helps :-)

@ivansandoval777 3 месяца назад

Dont you always experience lower gain in the captures? Whats the benefit to use a reamping box?

@JasonSadites 2 месяца назад

I have not found that. My gain level is always exactly as the amp sounded. The reamp box is designed to take the Line out of your audio interface and send the proper impedance level into the front of your amplifier. Hope that helps :-)

@BushidoPhoto 2 месяца назад

I can't get my capture device to play the sample tones that generate the capture. I either get squealing feedback from the amp or no sound when I click capture. I don't like the multiple cables going everywhere and I slowed down and ensured it was all hooked up correctly, but I feel I wasted my money.

@JasonSadites 2 месяца назад

I would need a lot more info about your setup to help. What audio interface are using for starters?

@user-bq2kc3bz2s 5 месяцев назад

Hi Jason thanks for the detailed walkthrough of this! My capture results have definitely improved. I have a quick question. If I'm sending a line level output from my interface into the Tonex Capture box, and then out of Tonex Capture into my amp without any attenuation (leaving the knob at 0db), am I essentially hitting my amp input with that full line level signal? I just want to be sure I'm not overloading my Princeton especially as I start to do captures with higher amp volume. Thanks!

@JasonSadites 5 месяцев назад

My pleasure :-) If you followed the calibration steps I laid out in detail at the start of the video, you will be fine. Hope that helps!

@user-bq2kc3bz2s 5 месяцев назад

@@JasonSadites Thank you it does! I was able to calibrate my send and return levels with a multimeter like you described. I just can't tell if getting 0.775v out of the cable going into my amp means I'm hitting the front end of my amp with 0db of signal or -11db of signal

@freaksarise 2 месяца назад

Hi, for the line 3 output that feeds back into the capture hardware, are you sending a specific channel to that output? or is it the same output going to your monitors? In my system I have an output matrix and need to define which signal is patched to the "line 3 output". Thanks!

@JasonSadites 2 месяца назад

The Line 3 output is its own output. It is used to send the training signals to your amplifier/pedal depending on what you are capturing. Hope that helps :-)

@drausiofonsecatronolone5611 3 месяца назад

So it means you cannot get a model from a separated guitar track as you do with VRC for voice? You need to get access to the original amp... I was going to sell my kemper. But....

@JimijaymesProductions 2 месяца назад

Any recommendations for getting pedal captures of low gain/boost sounds to actually have level. I captured as hot as possible (-1 below clipping at any point during the capture process) and yet its still quieter than unity in both tone x and amplitube. It shouldn't be its coming back way hotter then the test signal is sending (ie should be above unity) but whatever IK uses to somewhat normalise kicks the volume down a lot on dynamic signals. On the high gain stuff it is the opposite problem being a lot louder despite the pedal itself not being louder (rms is probably on par, peak is much lower).

@JasonSadites 2 месяца назад

Unfortunately that is the nature of cleaner tones. The peaks are going to be much louder than the RMS. I get around it by using the compressor after the fact in the preset to control those peaks on the cleans which will then allow you to up the volume before clipping. If set properly it can be quite transparent. Hope that helps :-)

@JimijaymesProductions 2 месяца назад

@@JasonSadites yeah it's just annoying that tonex turns down everything by that amount . There is plenty of headroom there but the level tonex captures at means I can't capture any of my boosts and have them function as boosts.

@GabrielSkolderblad 3 месяца назад

I just watched your video about the input setting and it was not "very in depth as you say". All we learned was that you set it to 12 and dial it back to - 3 because you like it. Maybe I watched the wrong one?

@JasonSadites 3 месяца назад

You watched the wrong one. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AAL9AEWkoDM.htmlsi=0l-4YhQmn8ut9whh

@heartsquaremusic2953 3 месяца назад

until there is a standard for gain staging while creating these captures so that every capture represents the actual level of a guitar at zero trim input, I’m not buying this. For all of the research and development I came multimedia has put in, they need to account for this, and have a stamp of approval for creating captures.