Unreal Bluetooth Plasma Speaker (3D printed)

Подписаться 810 тыс.

Просмотров 267 тыс.

50% 1

Learn how to build your own transformer, and go to Brilliant.org/PlasmaChannel to get started for free! In an attempt to create an improved High Voltage supply, I added a Bluetooth upgrade and a custom high voltage AC flyback, and was blown away by the size of the arcs this thing produced. If you build one of your own, you do so AT YOUR OWN RISK.
Check out the new merch here: crowdmade.com/collections/pla...
Images Scientific HV kits here! www.imagesco.com/science/high...
AC flybacks from ebay: www.ebay.com/itm/232767534566...
Support / Follow Plasma Channel on:
Patreon: / plasmachannel
Twitter: / channelplasma
Facebook: / plasmachannel
Instagram: Plasma_Channel_Official
=======================
**Music credits**
======================
Title screen music:
Song: Sappheiros - Awake
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • Sappheiros - Awake (Vl...
ALL other music provided by Epidemic Sounds
I am also a television actor! Follow me on IMDB
My IMDB: www.imdb.com/name/nm6578948/
#wireless #high voltage #plasma

Наука

Опубликовано:

4 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 723

@PlasmaChannel Год назад

If you want to be a smart person - go to Brilliant. If you want to see my new website, and learn more about why i'm obsessed with plasma, go here - www.PlasmaChannel.net. Also, sorry about that high pitch noise in the beginning! It was mostly an artifact of the camera being too close.

@sFeral Год назад

Flyback can't be AC Jay, you keep making the mistake. Flyback is the name for the "topology", pulsed DC to pulsed DC... but it's not the only way to get HV DC, you already played with an ignition coil, and that doesn't even have a diode on the output, yet gives DC (if driven right) 1EabqJJnWhc

@sFeral Год назад

btw it would make more sense (be more efficient) to modulate a Mazilli ZVS when you're using output AC. Look what CoolDudeClem tried, but there are other more successful attempts, just can't recall channel names.

@PlasmaChannel Год назад

@@sFeral As long as the spark output by an ignition coil dissipates all energy in the first cycle, it will be DC. In reality, most all ignition coils i've used have a ring on their output. As for flybacks - they are AC by nature. The addition of diodes is what makes them DC, or, an offset secondary balance will also do similar. Any secondary coil that is mid point balanced will output one terminal negative voltage, the other terminal positive. I tested my custom flyback to have an AC output.

@arkhilious Год назад

@@PlasmaChannel I love it when random commenters try to get smart with the pros but they're actually wrong. sFeral, ya made me laugh. Do your damn research before ya make corrections.

@FUTURE56 Год назад

where can i buy these parts?I want to buy too I'm trying to do something

@ILCorvo001 Год назад

Another wonderful video, Jay. Ionophones are one of the first HV projects I ever messed around with, and are always an interesting conversation piece, even to those who are familiar with this kind of work.

@jordanbennett6461 Год назад

I love that giant table saw! Makes for some very clean builds.

@ldlm91 Год назад

Love your videos! I did a similar circuit with my Tesla coil but my method of control was PWM and that seemed to provide a very clear and loud sound. The spark frequency was however much higher at around 2 MHz.

@MattH-wg7ou Год назад

Dude I love this channel. It is everything, exactly what I want to see!

@GrandadIsAnOldMan Год назад

That is another beautiful piece of functional art, Jay 😊❤

@PlasmaChannel Год назад

Hey Grandad, thanks. That's my style. More of an artist than an engineer!

@proxyhx2075 Год назад

I also used one of those XY-P15W mini amplifiers for a big slayer exciter project. And it worked flawlessly! This thing can power small to medium size subwoofers very well with minimal distortion under 30Hz. It's a very neat amplifier for it's size, that's one thing for sure. Excellent video Jay, I loved the design aspect of this project. Unique as always!

@EnricoMarangonJunior Год назад

Plasma is the future !! THANK YOU SO MUCH FOR ALL YOUR WORK.

@user-kc6fz4vv1j Год назад

Man ! The intro is just awesome as hell ! You blew my mind 🙂 🔥 That sound gives me a sci fi vibe ... Thanks 👍

@Mrjrich37055 Год назад

Love it, amazing as always!!! Keep up the great job

@PlasmaChannel Год назад

Thank you so much

@DavidCook42 Год назад

Loving how the channel pushes you further ;-) Awesome content that I like to share with my kids. Thank you !

@PlasmaChannel Год назад

Thanks Dave, it certainly pushes me further. Every video...I learn something

@heftycat 9 месяцев назад

That flyback design looks gorgeous, the 1st one.

@MrBademy Год назад

bro this is epic, keep it up you are one of my favorite innovators, please create a whole plasma speaker, that arcs epic on sounds, that would be next level, and this is an interesting way of distributing sound without using magnets and membranes to shake the air.

@PlasmaChannel Год назад

Thank you, I appreciate your support

@kimberlysmith5404 Год назад

This channel has everything I've been searching to find!!! Like WOW!! Thank you. Xo

@PlasmaChannel Год назад

Thanks Kimberly! If you have questions about any of my projects, don’t hesitate to reach out.

@kreynolds1123 Год назад

I once seen a splama speaker made with two half globes curved surface to curved surface with a space between them and a high voltage arked between them. I imagine they helped the sound curve the soind radiate it in all direction while concurrently providing capacitance for a hotter louder arc.

@deizozd Год назад

It's amazing, the sound is very good

@self_taught_stuff Год назад

damn man, who is making your videos? there is no way an engineer can have such video editing skills and sense for good quality video production... best wishes, keep them coming...

@PlasmaChannel Год назад

I appreciate that. The trick is...i'm not an engineer. I'm a maker :P

@self_taught_stuff Год назад

@@PlasmaChannel 😂👍

@frankearl9285 Год назад

You might be surprised...

@patrickcox4113 Год назад

@@PlasmaChannel what do you do for a day job?

@Slowly_Going_Mad Год назад

That improvement in audio quality and design is amazing. Also as you said in another comment sometimes there is distortion when recording so I can see it being nearly silent in operation.

@PlasmaChannel Год назад

Hey Mad Scientist! Good seeing you here. Yeah, after thinking about it, my audio equipment has a good 4-6" loop of COILED wire going from the audio receiver, to the camera. The audio equipment clips ontop my camera. The camera was only......5 inches from the arc during many of those shots. So I think the transformer pulses were artificially inducing a voltage in the audio equipment. Bummer - the arcs are hot and silent in person! At the right frequency.

@Slowly_Going_Mad Год назад

@@PlasmaChannel that's another good point that I didn't even consider. EMI on the pickup. I wonder if having it shielded would help. I'm thinking like that perforated or mesh metal like on the older studio mic's.

@Vagabundo74 7 месяцев назад

This was the first video I've seen of yours, and I dont think that any combination of words has ever caught my attention faster than "plasma river table." I subbed before I even saw the clip, lol. Also, the sound of the electrical arc was so strangely soothing. Maybe it's because it reminds me of the sound of my parents' old CRT or the plasma globe I had as a kid, but I've always loved that sound. Anyways, great video. Thanks for the great content!

@SeanGreezy Год назад

Hey Jay! Love your videos and I love seeing your build process. Your clear plastic parts are so eye catching to me, I love the blue piece you made for this project so much. Would you be willing to do a Video going over most all of your tools& processes? Im interested in hearing all the tips you have to offer

@aryansingh7209 Год назад

Every video of yours is absolute gem. Looking forward for more interesting videos. Man made whole channel based on plasma and think we wouldn't even notice.

@PlasmaChannel Год назад

Thank you Aryan, thats really nice of you. Glad you enjoy my videos.

@leosthrivwithautism Год назад

Now this is freaking cool! Loved it!

@PlasmaChannel Год назад

Thank you!

@leosthrivwithautism Год назад

@@PlasmaChannel your welcome! I always love checking in every so often to see what cool new thing you come up with. Every so often I build things myself it’s always fun. But heck, it’s not even close to what you build. Maybe one day I’ll figure out how incorporate some of the things you invent and make my invention just a bit cooler 👍 always love your content! Keep it up!

@pablogarin Год назад

This comment is to show support for your channel... Cool project, I have to say, I'm a big fan of 555 timers... I use them all the time, but this is one of the best ideas ever for one of those... kudos!

@Patrick-dw8hq Год назад

Nice clean build

@kreynolds1123 Год назад

Thank you for your story arc on creating musical arcs.

@eseseis7251 Год назад

your title and thumb, never do justice to what i find in the vid, i mean, i only click cuz boreed, now, im glad, i mean, is like a vault of information and music to my brain. i feel dumb for not getting here before. i didnt imagine music from plasma, you know, literaly, but blew my mind

@PlasmaChannel Год назад

Hey, I want you to know that I really appreciate your comment. MAKING the thumbnail, often, can take hours. To try and figure out the best way to show the world your video, with a single frame, is nearly impossible. But the fact that you think my thumbnails aren’t as good as my video is actually a huge compliment. Means you think my videos have good value. Thank you

@sarahdaviscc Год назад

That was really cool. I'd love some more footage of the finished product in action!!

@PlasmaChannel Год назад

I can do a follow up video, for sure.

@sarahdaviscc Год назад

@@PlasmaChannel cool! 🙂

@mckanebullerlee3020 Год назад

@@PlasmaChannel You sir are a badass! Keep it up! Also, I’m in Snohomish County. We should grab some beers and have a lively conversation regarding electricity.

@avazgaziz Год назад

Very nice idea to make sound by arc! Some details interested me: switch makes meandres which transform to saw-like signals after current-field-current transformation. It will be interesting to see that. Also interesting to see some illustration of sound specter transformation.

@theelectronmachines Год назад

Excellent video. I can definitely see you getting 1 million subs soon 👏

@nigel-matthews Год назад

Nice clean build as always! I love your “giant” table saw 😭 That electronics store looks amazing! Is it in Washington?

@PlasmaChannel Год назад

Hey Nigel!! Thank you sir. Yeah, that table saw is the thing of dreams. Vetco electronics is the only store near Seattle.

@platypusrex2287 Год назад

In Tucson we have Elliotts Electronics

@arkhilious Год назад

@@PlasmaChannel Vetco has helped me out so many times!

@troyallen8223 Год назад

Can't wait. This is so tight👍

@MANUKRISHNAN008 Год назад

What a quality work man....!! Love from India buddy

@LunaWuna Год назад

I really need to get ac flybacks sometime for a voltage multiplier

@doyouevenscience Год назад

I hear the frustration with AC flybacks. What I didn't know was the little ones for CO2 lasers were AC. Thanks for the info. Great project as usual. From a plasma nerd down under

@abhishekjnair6429 8 месяцев назад

You're a geek 😎😎

@noelandrew3600 Год назад

To make it even more awesome add a ring magnet as the hv ground and place the other hv lead in the midddle of the hole, and now you have a plasma vortex speaker, as the output gets spun by the magnetic field. this results in a disk of plasma in a vortex, and volume is increased.

@PlasmaChannel Год назад

I thought about that after I posted it this morning. I thought, "Why not a vortex speaker!?" So, i'm going to try it.

@inventorkr1 Год назад

I love the content you are doing ✅

@Jezorius Год назад

Another great vid 👍 good job

@jacquesb5248 Год назад

awesome ! love it

@abbeyoneworld Год назад

That whisper to your 3D printer is the ice on the cake for this video 🤣🤣🤣..love it ....nice work as always

@PlasmaChannel Год назад

Thanks Abbey, haha, sometimes you need to say tender things in order to get stuff done.

@EricTheCat Год назад

Sweet project. Really impressed by your build quality. You would probably laugh at the monstrosity I built years ago to do essentially the same thing with a 2N3055HV transistor instead of a MOSFET with huge heat sinks and fan cooling for the transistor and the power resistors. 1/4" audio jack for plasma speaker operation. Done "wrong" but works perfectly with a larger footprint. :)

@Mulakulu Год назад

I wonder if only making pulses when the audio makes pulses would sound any better than adding a square wave to the music.

@PlasmaChannel Год назад

It likely would increase audio quality. My driver circuit was really basic - some people get crazy complex with their designs....and you get what you pay for. Rather...you get what you design for. I was most interested in voltage output, with music as a secondary. But some plasma tweeters are incredibly clear.

@TechnoW1zard Год назад

Very nice! For HV output terminals that can endure the heat of the musical arc, may be try a copper-tungsten (CuW) alloy rod segments. I hear it's easier to cut than pure tungsten.

@skylerlehmkuhl135 Год назад

Or just get tungsten TIG welding electrodes, which are pre-made to an appropriate length.

@peter360adventures9 Год назад

Awesome build.

@PlasmaChannel Год назад

Thanks!

@bradpace6524 Год назад

Thank you for this. Ive been struggling with this circuit for awhile and many of the other videos on plasma speakers aren't very clear or easy to follow. Quick question, can the neon bulb be replaced with a zener or ultra-fast recovery diode? Thanks again!

@cr0cket01 7 месяцев назад

that was amazing

@BlueprintScience Год назад

Pretty cool!

@sFeral Год назад

except for the mistake he keeps making of calling everything a flyback lol

@PlasmaChannel Год назад

Let me flyback to that comment real fast. [lolz] Yeah, I do use that term quite liberally. Flyback and high voltage, high frequency ferrite core transformer for me go hand in hand. Even though they aren't all flybacks! Fair point, good sir.

@lukes3576 Год назад

I’d have to experiment further by mounting a tack or something similar to the centre of a tin foil pie plate and and seeing how much more tone and acoustics you maybe able to get.

@treasuretotrash2067 Год назад

Nice build as usual Jay, a great way to ensure that there will be no arcing over is to encase the windings in epoxy. Maybe you could use the remaining epoxy from your table

@PlasmaChannel Год назад

Thank you. Yeah, I mentioned in the video that I was thinking of encasing the windings in resin. I found a far better solution. To dunk the entire secondary in Super Corona Dope, then place in a vacuum chamber. It gets the Corona Dope in between the windings, and does total wonders.

@LabCoatz_Science Год назад

Excellent video Jay, that's quite the beast! Have you considered using it to make a musical Jacobs Ladder? And also...your mini table saw is easily one of the coolest tools I've ever seen.

@PlasmaChannel Год назад

Haha right?! My father actually gifted me that for Christmas. It's the best. Musical jacobs ladder sounds amazing.

@karlharvymarx2650 Год назад

@@PlasmaChannel You could play Stairway to Heaven on a loop and put it in a time-out area or use it to remove house guests that have gotten that fishy smell. I love the song but after a few hundred loops pain sets in which explains most chemical abuse in '70's nightclubs.

@khashayarmodaberi4958 Год назад

@@PlasmaChannel Yeah! The Jacob's ladder is one of the projects of Mehdi in ElectroBoom! You can get a good idea from it! Very high voltage with powerful arcs!!😅 You are Great man😊

@JesusGonzalez-gr9wz Год назад

Okay you finally convinced me to use Brilliant.

@NerdlabsSci Год назад

hi jay! this build was really impressive! You should try powering a plasma globe with it!

@PlasmaChannel Год назад

Oh that's a great idea! Dont know why I didn't try that....

@noneedtoknow5315 Год назад

I usually use a variant of an astable multivibrator to power my flybacks. It allows me to change the time period for both the on and off states. I started using multivibrators because BJTs can tolerate up to 30 volts, where my 555s burned up at 15 (Under 12 without protection). I also had trouble driving a stable frequency above 21 KHz with the 555. I'm currently working with one that goes from 6 to 60 KHz. I made a mock up of the inside of a microwave magnetron, except without the resonant cavities or emitter. The arc spun around at probably 30 to 40 Hz, so no danger. An idea for a video, but I must warn you, it took a lot of current to overcome the electrostatic confinement from one anode fin and allow it to jump to the next in rotation. Enough to melt the cathode. (I'm guessing about 22 milliamps at 12KV, about 250 watts.) Oh, I also needed an RF filter between my driver and the power rail to compensate for the voltage drops when dumping around 25 amps at 20% duty cycle.

@Edmorbus Год назад

Keep up the good work

@JK-dx7ex Год назад

Do you have a prebuld cold plasma device that can be used for treating seeds ?

@clusterstage Год назад

I would love to see an entire video dedicated to this arc playing music. Tho, you might not be able to monetize that one. But, for sure, this is an amazing product, (no moving parts) especially if it can play BASS frequencies.

@malcom846 Год назад

Wow you make such nice videos

@iamkian Год назад

Wow. This is so nice Jay. I'm going to have a look and see if I can build one too. ~Kian

@jaydean7 Год назад

loved it

@brandonfranklin4533 Год назад

This was great! Thanks for answering the call :) it was kinda cool seeing my comment up there on screen too 😎

@PlasmaChannel Год назад

Haha well thanks for commenting!

@NGPerez247 Год назад

Could a bifilar coil benefit this circuit anywhere? Was the quality better in real life? I would assume that the emitted square waves could cause interference with the microphone circuit and not truly capture the sound quality to its fullest. Thanks for your contributions. It is great to see your continual optimization.

@petevenuti7355 Год назад

That huff after reading the parts list 👌 Question is there any reason one of these couldn't act as an ultrasonic transducer? I mean if I ran it close to 50khz could I get decent audio from 15-25khz? Or would I be better off rapidly changing impedance on the other input?

@maeanderdev Год назад

If you only want one frequency (and many harmonics of it) It's actually easier than that: The ac from the transformer is already enough to get sound produced by the arc. Note that the arc fires twice as frequent as the drivers frequency, since ac passes zero and reaches a maximum twice per period, becuse of that you'd have to drive the transformer at 15kHz to get 30kHz If you want to have a plasma speaker for ultrasonic waves you indeed need to set the driver to a significantly higher frequency. The theoretically lowest possible would be twice the sound's frequency due to the Nyquist-Shannon sampling theorem (the 555 chip can only change once per period, and thus has a sampling frequency equal to the drive frequency) You may be able to drive a flyback transformer at 100kHz, but for that you will likely require a larger heat sink, changes to the circuit or a totally different circuit, as well as a well picked Mosfet

@hoopajuusa7313 Год назад

It would be interesting if you tried using the blue tooth from some noise cancelling headphones, if they would cancel out the feedback sound of the square waves to make the blue tooth sound more clear?

@dz-abouttechnique1849 Год назад

Nice video! 👍

@mechtrontech Год назад

Awesome ❤️

@Tigeristiger Год назад

You can get louder volumes and more power using an IRFP450n mosfet. It will require more input power and a bigger heat sink.

@PlasmaChannel Год назад

Thanks for the suggestion. I'll try that!

@Nielsquake0 Год назад

Highvoltageshop a german based supplier sells AC flybacks. I used one with 36v with a 300Wh battery and man the arc was over 5 cm long!

@daytonfox8418 Год назад

I built a version of this a few days ago except I used a zvs driver, and it doesn't have Bluetooth. Only a 3.5 mm audio jack. It can handle about 250 to 300 watts and makes an arc about 3 or 4 inches long.

@PlasmaChannel Год назад

Wow that's crazy. You should upload a video, and provide the link here.

@daytonfox8418 Год назад

@Plasma Channel ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hiQFqK3zi5Y.html here's a video, sorry if it's really low resolution-im not sure how to fix it if it is.

@spiritualinsight 10 месяцев назад

If I remember correctly if you need the output to be cleaned then the input you run a 555 op amp into a 555 op amp as a negative feedback loop. Though for just power not sure if that's needed.

@kevincox5397 Год назад

Hey so I am new to this channel and I love the build and I am tryin to get the parts together to build one, but I have questions. What do you use for the input on the power supply and are there any good online resources you know of for caps, resistors and such, my local store had some stuff and online is really hit or miss. Even the mouser source you have in another video was limited. Any help would be appreciated.

@alexnuttall9162 Год назад

Looks great such a cool project - have You though about putting an ducting on the rear to create another Venturi effect ?

@shitpostingsandwhich Год назад

You know you have good headphones when that arc at the start pierces your brain.

@sambaroglio6915 Год назад

Wow you are next level.

@charlesreynolds39 Год назад

That self made flyback is absolutely a thing of beauty! How can I make a secondary bobbin like that without a 3d printer?

@erikzidan2601 9 месяцев назад

Could this circuit have an audio jack instead of bluetooth? Or would the arc put noise into the jack disrupting the signals? Also how much current does this draw?

@clairmorrill8660 9 месяцев назад

Jay, sometime in September 2005 I designed a Halloween themed circuit, from some online research that I did on arcs I discovered that using brass balls generates more noise than sharp points, your ionic speaker build could benefit from this knowledge

@inee6543 Год назад

Hello man, could we like have some info on the AC transformer, like output voltage, turns on secondary?

@jidukrishnamurti8114 5 месяцев назад

excelente video los sigo desde argentina . te consulto que hilo y numero de vueltas usaste en el flyback que creaste . saludos y espectacular tu canal

@SHEMZILLER Год назад

I used to keep a lot of flyback from old CTRs which I came across you channel earlier

@Sttreg Год назад

omg, what is this table saw?? It is so tiny, yet so perfect! I've cut multiple acrylic panels " by hand" and this table saw would come in handy !

@cmillett85 Год назад

If there was a way to reduce that plasma noise like reducing the static of a turntable by cleaning the records, I thin it'd be much clearer sound, although kind of flat sounding.

@DakkyW Год назад

Curious to see how the bluetooth music reactivity would look running the plasma table

@Igoran8686 Год назад

Hello friend, it looks like your flyback is warming up! The 220n capacitor on the primary winding will create resonance and increase efficiency. Is there a link to the 3d model? I'd like to wind one too. Thank you in advance!

@PlasmaChannel Год назад

That flyback was more than warming up. It was melting lol

@Igoran8686 Год назад

@@PlasmaChannel Ha ha! Good sense of humor) On my channel, the latest video. There the flyback works for 10 minutes, without radiators and with zero heating. The power supply is 1 bank of 18650, but you can also set it to 12 volts. By the way, can you give a link to a 3d model of the frame? I want to repeat.

@MI_44177 Год назад

Jay's moans of enjoyment when he sees plasma made my family very curious as to what im watching. Awesome project tho im willing to try it.

@PlasmaChannel Год назад

Omg hahaha sorry about that

@gauravroy8528 Год назад

Everytime you upload a new video, I feel satisfied. You are only the one who rules over the lightning and thunder. I think you are the god of lightning and thunder. ⚡⚡🤩🤩

@PlasmaChannel Год назад

Wow, that's an honor! Lightning and thunder are friends.

@Ivan.Wright Год назад

Hey Jay, I hope you're doing well! I've been following your content and I'm enthralled by your knowledge and passion for plasma physics. I was wondering if you have any plans to build your own plasma toroid like BackMacSci and others have made? I'd love to see your unique take on the device, its construction, and operation. I'm sure your followers would be just as interested as I am.

@PlasmaChannel Год назад

That video honestly is planned. I've been in talks with BackMacSci - met him at a conference in November accidentally.

@Ivan.Wright Год назад

@@PlasmaChannel That's awesome to hear! I remember seeing a photo of you two from that. Can't wait to see your take on the plasma toroid!

@senarathnaub8389 Год назад

Very good its a good hivoltage musical device.

@PaleShadow14 Год назад

Great Video

@PlasmaChannel Год назад

Thanks!

@ProjectPhysX Год назад

I built a plasma speaker as a school project many years ago. Only problem was that the Mosfet would desolder itself after about a minute of operation, even with heatsink. Is there a trick to have less energy loss at the Mosfet?

@sFeral Год назад

get one with the lowest rDS

@raobuildz6550 Год назад

Hey, one of the ways to lower energy loss in MOSFETs in a flyback driver is to have a snubber circuit across the primary coil. A primary with high inductance is also preferred. Let the resistor be a high power one coz it heats up very much. Just built one a couple hours ago and the snubber circuit keeps the MOSFET stone cold. Good luck with your build!

@PlasmaChannel Год назад

I do find my MOSFET getting very hot after a minute of use, but never enough to break. The snubber circuit indeed does help - using a 10k resistor in series with a neon indicator bulb is an awesome snubber.

@electronics588 Год назад

I like to do something similar, but how much many turns did you do on the secondary? And how thick is the wire? Please answer me.... 🙏🙏🙏🙏

@johnruscigno5738 Год назад

Hi Jay! Great video as usual. I'm surprised the 555 can drive a p260. I'm pretty sure if you add buffer transistors to the output of the 555, you'll get a better output and put less strain on the 555 because they'll carry the current. The mosfet will run better too.

@arjovenzia 6 месяцев назад

I found very good results using a totem pole driving stage. It worked fine without it, but the 555 kinda struggled to switch the FET hard enough, so I wasnt getting a nice crisp square output. made the fet run hot and limited the amount of current it could put out. a totem pole really improved the output drive waveform under load, ran the FET cooler, and my arcs doubled in thickness and meanness. the only other mod to this unit that made a bigger difference was going from 24v to 100v, which was a MASSIVE redesign for many reasons. you should be able to shoe-horn a few extra transistors on any design without much effort.

@johnruscigno5738 6 месяцев назад

@arjovenzia exactly. And if you check the design on the 555, you'll see inside of the output on pin 3 is actually a little mini totempole. So by adding an extra stage, it's like steroids for your pwm lol.

@cchungas3490 8 месяцев назад

Buen dia, una consulta donde puedo comprar el nucleo de ferrita y cuales son las medidas, para fabricar el transformador

@serta5727 Год назад

Feeling fly⚡️

@jamiecurran3544 Год назад

Great video thanks!😜✌️

@PlasmaChannel Год назад

Thanks Jamie! Appreciate you stopping by.

@jeromtech963 Год назад

After a long time 🔥🔥🔥🔥

@DirkLarien Год назад

i love your giant table saw.

@PlasmaChannel Год назад

It’s the perfect table saw…. For when size matters

@martinTintin476 Год назад

can it short circuit? where does the energy go? what is its consumption?

@Davidslabofficial Год назад

Awesome 😎

@hectoris9193 Год назад

Imagine if you made the plasma table dim and brighten to the beats of music you play with a similar circuit :)

@sebrobertson7798 Год назад

Imagine 10 in a row, tune each one to be triggered by seperate frequency ranges (overlapping slightly to avoid cutout), would be a unique little light show for each song if you could tweak it right!

@JoeyBlogs007 Год назад

I suggest the plasma filament needs to be in a clear glass vacuum. Plasma does not need oxygen. Plasma is a state of matter that consists of ions, electrons and neutral particles. It can exist in the absence of oxygen and can also exist in a vacuum. That said, in suggesting that, I'm not sure how well the speaker part would function, if at all. However the filament might last longer.