Unstoppable Land Cruiser 80 Rock Crawler Episode 5. Budget Off-Road Build.

Подписаться 365 тыс.

Просмотров 197 тыс.

50% 1

The Onx Offroad Build Challenge continues!
Today, we are going to add lockers, install gears and get this Land Cruiser to the next step. There is a ton of work in rebuilding axles but this is an extremely important step. I can't wait to get this Lx 450 on the trail!
If you want to see episodes 3 and 4, make sure you check out Dave's videos on the Dirthead Shed!
AMAZON ITEMS!!! www.amazon.com/shop/dirtlifes...
(Amazon Affiliate Links)
BARNES 4WD COUPON CODE: "dirtlifestyle" 10% off
NORTH RIDGE 4X4 CODE: "dirtlifestyle" up to 20% off www.northridge4x4.com
DOMETIC: bit.ly/3zPPRwN
ONX MAPS: webmap.onxmaps.com/account-pu...
EMPIRE ABRASIVE CODE: "dirtlifestyle" 10% off lddy.no/qf79
YANKUM ROPES CODE: "dirtlifestyle" bit.ly/yankumDL
MIDLAND RADIOS: bit.ly/2IjmlZD
EVOLUTION POWER TOOLS CODE: "dirtlifestyle" store.evolutionpowertools.com/
JOOLCA HOT WATER HEATER: bit.ly/37qLgEp
Shirts & Hats on our website!!
www.thedirtlifestyle.com
Support us on Patreon! / dirtlifestyle
Follow me on social media!!
Instagram: / dirtlifestylenate
Facebook: / dirtlifestylenate
DiRTBAG MAFIA Facebook Group
groups/34277...
DISCLAIMER:
Due to factors out of the control of Dirt Lifestyle, we cannot guarantee against improper use or unauthorized modifications of this information. Dirt Lifestyle assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Dirt Lifestyle recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Dirt Lifestyle. Be safe!
This video and description contains affiliate links, which means that if you click on one of the product links, I'll receive a small commission.
#landcruiser #overland #overlandbuild

Авто/Мото

Опубликовано:

8 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 323

@jordanlambourne5230 11 месяцев назад

Dude you’re a top tier professional at your craft. Much respect!

@StormbornJKU 11 месяцев назад

May sound weird but watching you work and listening to you speak about things and explain them as your doing them is just satisfying. Your level of craftsmanship and knowledge is truly mesmerizing and I appreciate these videos.

@keatonrink8446 11 месяцев назад

Its perfect for the hands on learners out there! people explain and i get lost, watching as he goes along and explains why he is doing what he is doing is a win win.

@miniwhatt 11 месяцев назад

I agree completely!! Very satisfying. So well done. Mr TEQ would be proud of his meticulousness 👌🏼

@Mattmcgee1989 11 месяцев назад

Kinda gotta David Friberger vibe watching this. 👍👍

@LeesGarage 11 месяцев назад

I feel like this is one of the most underviewed/underrated off-road channels on RU-vid. Also, most definitely best project in this challenge IMO

@mrethano 11 месяцев назад

The production quality and educational voice overs on your videos is unparalleled. I love your content even when it’s projects I’m not particularly interested in. I am always super excited when there’s a new episode of dirt lifestyle!

@DirtLifestyle 11 месяцев назад

Thank you! So glad you are enjoying the channel

@defiancegarage9896 11 месяцев назад

I am so happy to see that you showed everyone to use anti seize. I can not tell you how many times I have to rescue a fellow gear head because the splines are rusted together on two parts. Great job and pre lube with the lucas oil on all bearings. This is why that gear set up will have the best chance for a long life as possible.

@bertbccfu9564 7 месяцев назад

I stress that also , On my truck i have had every fastener out at least once , lol Everywhere it is appropriate it has never seize, that way when i do have to work on anything or upgrading it dll comes apart like it was brand new, it just makes life a lot easier ehen your not snapping bolts or stripping stuff

@shanes_bs2659 11 месяцев назад

Super cool to see your son old enough now to come in there and help out. Parenting done right!

@jiggyquinn5635 11 месяцев назад

If the voting was based upon technical expertise alone, you would receive 100% concensus. I found everything about this video extremely entertaining, (as with all you have done to date). Thank you!

@Cobb 11 месяцев назад

If magazine and channel builders have taught me anything, it's that you start your project no more than 6 weeks before the event, cobble it together and go, then spend the next year fixing it to go again and have a bucket of new problems from your changes and fixes; or it's just a motortrend thing. Honestly it's great to see build series where time is taken to do things right and think ahead to solve problems before they can happen. Can't wait to see the finished vehicle.

@paulbenabise 11 месяцев назад

I’ve been waiting for this episode. Thank you for posting.

@DirtLifestyle 11 месяцев назад

I hope you enjoyed it!

@guillaumeauclair8 11 месяцев назад

I agree, even if I'm trained in the art, being a former plumber myself , descendant from a family of three plumbers, I got to say that your a master ,👍 because : a subject that is mastered , when explained, is easily understood from some one NOT trained in the art. The way you do/say things it shows your level of knowledge/ability. Hats off !

@jvazquez53 11 месяцев назад

Working with your kid, that is an experience of a lifetime! Those diff covers are NOT ugly! They are very practical.

@DirtLifestyle 11 месяцев назад

I love having him in the shop when I can keep him busy 👍. It's so fun showing him the process

@AntonioClaudioMichael 11 месяцев назад

The Toyota Lamd Crusier Commercial Wad hilarious 😂 0:41

@dbrekke6570 11 месяцев назад

I know Dave came in late in a pinch, but he had it for a month?!!? You're killing it man! So much purpose-built experience and passion going into this on your part The voters just don't KNOW! Can't wait to see you blow up the competition once all the rigs get field tested. The truth will be known at that point!!

@mazevx2451 11 месяцев назад

Such an incredible build, this is so much more than just a competition build. It feels like this is the summary of years of experience. I wish you all the luck with it!

@Ironmerchant 11 месяцев назад

Not going to lie. Because of you and Dave I’ve definitely looked around at some Land Cruiser. As usual your production quality is great. I think you have the best produced show on RU-vid amongst the off-road shows.

@DirtLifestyle 11 месяцев назад

Thank you! I'm honored to have such high praise 🙌

@marshallanderson4609 11 месяцев назад

Damn...this is the highest-quality build in the OnXChallenge, hands down...When it's done nobody is going to believe you are only into it 15k!

@mejkkg 11 месяцев назад

I really hope you win! I watch and like all the others but you definitely deserve it, especially now that you've got the dirt head shed helping you. You both are really good at what you do, but you're my favorite channel on RU-vid! The knowledge and info you bring along with awesome wheeling trips is unparalleled!

@keatonrink8446 11 месяцев назад

Makes me feel better seeing other people using marine grease in our area, I was always questioned on it when building axles for people, so i spoke my concerns but could still see the doubt in their eyes.

@DirtLifestyle 11 месяцев назад

I did a ton of research on marine grease. Everything I could find showed similar performance as standard high temp. BUT it has additives that repel water, making it slightly more expensive. As far as I can tell, that is the only con 👍.

@adventure406 11 месяцев назад

I’ve always loved land cruisers and I’ve always loved Ramchargers, and I really appreciate the underdog aspect of the s10 so this series has had me conflicted. I will say though, that Nate by far has the most palatable content to watch so I’ve been rooting for him since the start

@origamihawk 11 месяцев назад

The small details you correct along the way are what really make this build so engaging. Those of us who do all the wrenching ourselves know how much time it takes to do everything the "right" way and it's worth doing even if it's never going to get you more instagram likes. I'm a 100 series owner and my Toyota bias means this is looking like it's going to replace your land rover as my favorite build.

@4570levergun 11 месяцев назад

An absolute clinic on 80 series axles. Bravo.

@cgtanker74 11 месяцев назад

Nate you ought to open a 4x4 fab shop that offers online advisory/setup services. Great vids man keep it up!

@DirtLifestyle 11 месяцев назад

This is part of the plan believe it or not! Hopefully first or second quarter of 2024

@cgtanker74 11 месяцев назад

@@DirtLifestyle Nice!

@ratfarmers 11 месяцев назад

Can we get in line now? Hehe I have a bunch of fab stuff I need done and a rear axle rebuilt!

@ThePogoIV 11 месяцев назад

Sometimes I fast-forward through your videos. But I watched this one all the way.

@bdlolli 11 месяцев назад

Hands down best content creator when it comes to off-road. Good on you dude.

@stevenlefebvre2991 11 месяцев назад

You are doing an absolutely amazing job. It’s nice to see someone do a quality job and not half ass it. Please keep doing quality work like you have been and showing people the right way to do things thank you.

@KS-wg5fy 11 месяцев назад

Amazing description and explanation on how you're rebuilding these axles! I "almost" feel confident enough to rebuild one of mine that needs attention!

@lbbowhunter1 11 месяцев назад

Nate, I love watching your videos and I can’t believe you guys don’t have more votes. If I lived closer to Washington, I’d be calling you to help me work on my rig as well. Super enjoyable I love the work you do keep it up.

@papawheelie5835 11 месяцев назад

Thanks for dispelling a lot of the myths and mysteries by taking the time to explain your knowledge. These processes are definitely knowledge gained from many many trials and errors which most "in the know" never take the time to share. Well done, Nate! Also, it's awesome to see you encouraging your son to join in.

@ElCompa_Mario 11 месяцев назад

Its cool seeing your son getting involved more! Good job

@chrishurley9128 11 месяцев назад

You my dude are the next Ian John Johnson in the making for the next generation in the off road community.

@stephengallina1774 11 месяцев назад

You’re rocking it Nate! That rig is going to be awesome. It looks great already. Pretty sure you’ve just raised the price on all the old Landcruisers out there 😂😂 keep it up!

@aldomassa7473 11 месяцев назад

Excellence friend Excellence !! I remember being in the garage too as a child with dad !! Awesome to see the children learn and participate. STRONG WORK 😊

@glenludwig9676 11 месяцев назад

Nate you never bore me. You are so knowledgeable and talented. Thanks

@Jeep.wj.tj.australia 11 месяцев назад

Your builds are 2nd to none in my opinion 👍🏻 love your way of explaining what's going on to people in layman's terms

@user-eh2ti1kp8x 11 месяцев назад

Nate, I will try and make this short. Not only is your work really good, but the way you explain things makes people like me understand. I am the proud owner of 4 land rovers, 3 defenders and a d2 TD5 (which build of yours led me to your channel) and watch your channel from Namibia in Africa. `"Rock crawling" here is not much of a thing herew, but raw off-roading and camping is our forte. Feel free to hook up anytime you ponder about an adventure in Africa. OK, I couldnt keep it shorter than that and keep those videos coming. Thank you.

@kylancook3477 11 месяцев назад

Props for the spacer over crush sleeve, way more reliable and simple to setup!

@horukuru 10 месяцев назад

The cleanest axle rebuilt I have seen so far!

@AntonioClaudioMichael 11 месяцев назад

Good old Toyota Birfield Axle 2:42 love it

@SWBCrawler 11 месяцев назад

nice work. seriously. every time i watch one of your gear installs i get a little closer to trying it myself. :D Thanks for having the heart of a teacher!

@offroadxplorer 11 месяцев назад

It has been fun to see this truck come together! That said, I am eagerly looking forward to seeing the Suzuki back in the shop.

@tommoffa4732 11 месяцев назад

Nice to see you back

@code_xj 11 месяцев назад

My favorite channel for everything offroad

@daviddale3624 11 месяцев назад

I too am very impressed with your knowledge and the high quality of your work. Thank you!

@brianshotton3353 11 месяцев назад

I LOVE how you get your kid involved in your projects! Great learning experience and bonding time with the little man. Can't wait to see what he fabricates in 25 years on his channel!!!

@redline870 11 месяцев назад

I started watching this channel just recently. I really appreciate your attention to detail and your wealth of knowledge. While I can respect the people who just send it, hope for the best, and figure it out on the road, I’m much more of the mindset of “do it one, do it right.” I really like these how-to videos, very informative, very well edited, and very engaging.

@alcurtice 11 месяцев назад

Class is in session! I always learn something on this channel. I appreciate that you take the time to show us how it's done. Even though I have set up my own gears and carriers, I have not worked on a Toyota. So now I have a good idea of how that goes down. Plus a lot of good advice that applies to all axle builds. Well done Nate, much respect! P.S. just going to hazard a guess that your little boy will be a fabrication, mechanical guru by age 15.

@DirtLifestyle 11 месяцев назад

Dude this kiddo is obsessed with wanting to learn how trucks work! It's so fun teaching him about these topics

@themadpants781 11 месяцев назад

You make the best technical video content for us trail heads, no question. Incredible videography and the explanation and detail is second to none. It's a lot of work making these videos, so much respect.

@LouisNoriega-gq3rb 11 месяцев назад

Your an incredible man. Everything perfect. Your son is going to be incredible also. Everything he does will be perfect.

@jeremyxman 11 месяцев назад

Just snagged a cheap ‘91 FJ80 a few days ago for the wife. She’s super excited about it, but man do I have my work cut out for me! It’s solid, but has had no maintenance for a very long time. Very long time.

@DirtLifestyle 11 месяцев назад

Nice! Congratulations 🙌

@Auguste88 11 месяцев назад

Lots of great information all put together. I also like the carrier mount you made, seem to make life easier on this project.

@dlancello 11 месяцев назад

Love the opening

@on-site4094 11 месяцев назад

Drives like a Lexus performs like a hummer 👍

@candidcapture 2 месяца назад

You are savage! That diff is the biz. I did my 1st "welds" last night 😂.

@TheBeardedJeeper 11 месяцев назад

I learn a ton with every video I watch thanks Nate!

@carvingupthetrails7288 11 месяцев назад

I've been watching a lot of your builds this last month and I've learned so much from you. Keep doing your channel please! I'm going to finish this series and the off road trailer then going to your welding series.

@tiny_the_200 11 месяцев назад

Great practical upgrades on that LX. Can’t wait to see it in action 🤙🏼

@DirtLifestyle 11 месяцев назад

Me too! Hopefully, I can get it on the road this week

@bennettsmith2896 11 месяцев назад

Great content and great teacher too. Thanks for taking the time to explain the steps along the way. I’ll never do these things myself but I appreciate gaining a better understanding.

@thedirtlifesupreame 11 месяцев назад

On my gladiator rubicon, i just reused the factory shims and was right back into the factory specs when I went up to 5.13s. I was really surprised and checked it 3 more times. So far, and 50K miles, no problems. Gears are quiet. It was my first time ever doing gears. It took me 6 hours on the back, to learn how to do it. The front only took me 3 hours. Probably the scariest thing I have ever done on a vehicle. Plus I saved myself $2k on install. Plus I know I did it right. I wish everyone used removable third members though. It would make setting gears up so much easier. I'm more of a fan of Toyota and Land Rover axles.

@amorton94 11 месяцев назад

I blame you for my desire to build stuff. The TDI series had me wanting to get an engine on the stand and start "building" it. This video has me wanting to grab some axles and build them. I mean, I don't build stuff, but there is a desire there. 😂

@xxBlazinBobxx 11 месяцев назад

Looking forward to seeing this rig back together and out on the trails! No doubt much sweat, effort and sleep loss has gone into all of the builds!

@gopackgo69 11 месяцев назад

Take your time, family is the most important. Sorry for your loss.

@cvjeeps4life 11 месяцев назад

I look forward to every video you drop and I’ve been loving this series! You a true master of your craft 🙌

@ChefBrian1 11 месяцев назад

Great video. You really put in the time, both in the garage and the edit bay. Nice work! That LC80 is already so sweet!

@abouttime7316 11 месяцев назад

All 3 of the builds are going great. Can’t wait to see them all compete.

@TheShooter466 11 месяцев назад

Would actually prefer if all three went 🤔

@Coolhansolo 11 месяцев назад

I'm in Colorado I'll be looking for the teams.

@AntonioClaudioMichael 11 месяцев назад

Nice beefing UP the axle Housing looks good

@MegaRgallardo 11 месяцев назад

Love this bud, keep it up. Voting for you as often as I can.

@DirtLifestyle 11 месяцев назад

Thank you! I really appreciate the support 🙏

@rhyswilliams695 11 месяцев назад

Looking good Nate. You can also drill out the 8mm axle studs and fit 10mm. Worth the work if you like to shock load your drivetrain/ bounce etc

@darrenmackenzie1645 11 месяцев назад

Another super educational Nate video. One of the many factors that draws me to his show.

@fishingmontana1564 11 месяцев назад

Come on ppl go vote every day i have to be honest i dont do it every day but i have been at least 2 times a week this crew deserves it more than the rest

@ephjay6t87 11 месяцев назад

Great work! I much preferred watching you do it than me. You may have over done it with the grease. It can push through the inner seals and make a mess of the locker and R&P. You will probably be okay, but its usually best to leave a little space in the knuckle. My bets are on you and this LC.

@taeymansom 11 месяцев назад

Speaking from experience and to save a heap of pain especially on road brace the panhard mounts, 2 of my 80 series and a 105 series landcruiser cracked, broke and bent their panhard mounts. Also brace the frame around the steering box, they're prone to cracking.. ask me how I know 😅 love the builds mate and have been a long time watcher! Nice to finally know abit about a rig you've got 😂🤘

@taeymansom 11 месяцев назад

Also a nissan patrol GU steering box is a big upgrade from factory and will save your bacon later, especially under high steer load situations. That and a way to mark your king pin bolts to check for movement will help alot too. After alot of highway ks before tracks or heavy breaking the hubs can eventually heat up causing the king pin bolts to get enough wiggle to start to back out and snap..then it's a downhill run, it's rare but it definitely definitely happens 🤦😅

@CACressida 11 месяцев назад

He'll be using ram assist steering so the steering box won't be an issue.

@taeymansom 11 месяцев назад

@CACressida yeah I realised afte right commented that it probably won't be an issue 😅🤦 * for that reason*

@johnchisolm4033 11 месяцев назад

Wow, 314k subscribers. Last I looked it was 80k. Good job, Nate.

@brennanmetcalf 11 месяцев назад

On my #LX45 project, one limit I found on the 80 series front axle was the steering arm to knuckle interface. No matter what I did with the stock 4-stud system, it would not stay tight long term with hydro assist steering ( and that hydro assist was built to stop correctly at the ram, steering stops, and internally on the box all at the same time ) and a 40" tire. I ended up having to make large 1/2" thick tabs on all 3 steering arm locations that tied back into the steering stop bosses on the outer knuckle ball. This tool a few little tricks, but they are still removeable and the steering stops are all still adjustable. Those tabs where multi-pass TIG welded with normal ER70 to the steering arms. The steering arms are a forged steel part and welded quite nice once clean. I also welded everything while bolted together and allowed it to cool while in place. With multiple seasons on that modification, I can't recommend it enough for the 80 series knuckle package. I went from having to check and re-torque the studs after every day of hard wheeling to not having them move at all in multiple seasons with trips all over Sand Hollow, Rubicon, Dusy, etc.

@senorspiegel 11 месяцев назад

New to the channel, awesome work! I saw dirthead shed do the roll cage and sliders so I assumed that you didn't have the fabrication ability to do it, boy was I wrong!

@TheGersh13 11 месяцев назад

Really been loving the longer content! Keep up the awesome work, Nate!

@DirtLifestyle 11 месяцев назад

Good! I'm liking these longer videos as well

@michaelpinedo8597 11 месяцев назад

Great work man, everything spot on and torqued to spec. Very professional and knowledgeable. I learned a lot thank you. Keep up the great work.

@apoc-design 11 месяцев назад

I love your attention to detail, Nate. Fantastic. Did you get my stickers?! Cheers, man. Can't wait to see this thing in action.

@Christopher-vf6kx 11 месяцев назад

Not sure how you keep getting better and better but you do somehow. 💯💪 Hard to believe this is the same Nate from bj. Killing it!!! Love this. 👍

@Mr.Wonderful731 3 месяца назад

Those greasable birfs are really nice.

@joshwilson3796 11 месяцев назад

G'day mate, the bottom knuckle studs have a habit of undoing themselves. We have either welded the studs in or changed them to bolts. Great channel ❤

@flatblackandy 10 месяцев назад

Great job on the rebuild, another cheap option for a little more strength with those stock hubs is to get rid of the conical/stud and tap the hub for a bolt

@jimskatr103 11 месяцев назад

This makes me rethink gearing me sequoia myself homie.

@0nemoreonelove 11 месяцев назад

been following this build contest for a bit now. love the content, impressive craftmanship skills. but more then anything I'm digging the whole shop and all the tools you have.

@tylerbuhite5432 11 месяцев назад

Really dig the in depth long form content, appreciate you bringing us along. Sending my best to you and yours man.

@nathantunks1605 11 месяцев назад

So keen for the next video in this series. Love your videos!

@brotherheed00 11 месяцев назад

Was excited to see your rig at OverlandExpo in bend.

@DirtLifestyle 11 месяцев назад

Awesome! I hope you didn't look to close 😁 these day's It looks best at about 40-50 feet away...

@h-j.k.8971 11 месяцев назад

You rarely come across somebody that takes water repellant on automotiv running gear. Dirt Lifestyle does👍

@poobank 11 месяцев назад

Watching an artist at work here

@DirtLifestyle 11 месяцев назад

Thank you 🙏 that means alot

@jackc6299 11 месяцев назад

Educational video! Thank you. Maybe make a parts list for Onx elite to buy whats needed to build a similar rig. Out of the three, this Landcruiser is the one I would like to build myself.

@AntonioClaudioMichael 11 месяцев назад

Coming out well

@evintacy7272 11 месяцев назад

Nate that was an amazing video my friend!! I enjoyed it soo much !!!! Your great mechanic 👍

@alfansomendoza8556 11 месяцев назад

Love to see u have your son in there with you, hes lucky to have an awesome dad with skills and knowledge to be able to give to him. 🤙

@timcope6685 11 месяцев назад

Awesome work Nate!! Can't wait to see it wheeling!!

@Ryan_Tidwell 11 месяцев назад

Nate, awesome rig! Can't wait to see what it can do. You and Dave are my favorite fabricators on youtube. Keep it up. :D

@DirtLifestyle 11 месяцев назад

I'm honored to be in the same conversation as a guy as talented as Dave 🤘. Thanks for watching!

@TheTreadLife_ 11 месяцев назад

This is my preferred way to wake up on Sunday mornings.

@mrSweetpotato67 11 месяцев назад

Great video Nate! Love to see this build finished.

@grs4.169 11 месяцев назад

So stoked!

@justgopherit3454 11 месяцев назад

Found you from Rudy's channel. This is going to be an awesome challenge!

@fullswing2315 11 месяцев назад

Great job Nate, Thank you for the content. Your quality is 2nd to none!

@SubePelayo928 11 месяцев назад

This video got me motivated! I’m putting FJ80 axles under my 1st gen 4runner and have been slacking it! Need to get out in the garage and start working