This is a review of the new IFS Bondtech Extruder with built-in filament sensor (upgrade package) for the Prusa Mini 3D printer (non-sponsored review).
if you don't want to use a sensor, don't have one, or just want to see how to remove the original Prusa extruder then watch this instead • Bondtech Prusa Mini Ex...
Bondtech HEATBREAK video here • Prusa Mini Fit Bondtec...
This is the edited review version, as i originally thought sensor parts were included in the full kit.
THE 'FULL' KIT DOES NOT INCLUDE THE MAGNETS, SENSOR CIRCUIT BOARD/CABLE OR BALL BEARING from the Prusa Mini official filament sensor
So in short, for both the upgrade and full versions you will need to buy and cannibalise a Prusa Mini filament sensor or buy individual sensor parts
Please SHARE, LIKE and SUBSCRIBE if you would like to see more 3D printer related content.
===========================
Note: ESTEPS need to be added.
Either place into a text file (e.g. Notepad) these steps on a usb stick, and run as a print for 10 seconds on each power up (this should ensure new loading of filament works correctly)...
M92 E415
M500
or place it between these lines in the slicer start G code box (thats the M92 E415; Set estep) ..
M109 S[first_layer_temperature] ; wait for extruder temp
M92 E415; Set estep
; intro line
==========================
Useful links:
Tukkari Enclosure web pages:
Europe: www.tukkari.com/
USA/Global: www.tukkari.store
#bondtech
#extruder
#InternalFilamentSensor
#IFS
#PrusaMini
#Tukkari
#Enclosure
#Filamentsensor
#bondtechextruder
#bondtechextruderprusamini
#bondtechclone
#bondtechprusamini
#bondtechfilamentsensor
6 сен 2024