Тёмный

UPGRADE How to Get MORE DISTANCE for a BAIT CANNON! CHEAP BAIT LAUNCHER - HOW To BUILD a Bait Cannon 

Woods2Table
Подписаться 8 тыс.
Просмотров 105 тыс.
50% 1

If you want MORE DISTANCE for a BAIT CANNON, we'll show you STEP BY STEP How to Build a Bait Cannon in this video. Launch your surf fishing bait hundreds of yards offshore! This is an EASY and CHEAP BAIT LAUNCHER Design, a very FAST BUILD and even more EFFICIENT & EFFECTIVE than our first bait cannon!
Reach more and bigger fish by exceeding your own limits of casting a surf rod! Just like a potato cannon or potato gun, but a bait launcher instead! We went with compressed air pressure as opposed to flammable propellants as seen in other designs, and it WORKED SO WELL!
------------------------------
Perfect your Wild Game Recipes with amazing seasoning, sauces and rubs from PS Seasoning! Use offer code WOODS2TABLE for 10% off at: www.psseasoning.com?aff=21
Outdoor Gear & Supplies at GREAT Prices from Aventuron - www.avantlink.com/click.php?t...
If you like AWESOME Camo, high quality hunting clothing made in the USA - check out Blackstock Clothing: blackstockclothing.com/
Use offer code WOODS2TABLE20 for 20% off your order of $35 or more!
This is not a paid promotion. However, if you use the links above to purchase a product, we may receive a small commission at no cost to you. It sure does help us out and helps us produce more videos like this in the future! We thank you for your support!
------------------------------
BONUS: If you fish with a BAIT LAUNCHER and you're looking for alternatives to freezing your entire bait rig in ice - you NEED TO WATCH this video: • BEFORE YOU FREEZE Your... ... In this video, we experiment with a few different methods to load and shoot your COMPRESSED AIR BAIT LAUNCHER WITHOUT FREEZING the entire bait rig!
BONUS x2: If you're also interested in getting the MOST DISTANCE out of your bait cannon - check out this video: • DOES BARREL LENGTH MAT... ... We tested the effects of barrel length on distance for an air bait cannon, and we show you how to calculate the (approximate) optimal barrel length for your bait cannon! Enjoy!
Make sure you Like and Subscribe for more similar content and to see our next Bait Cannon build!
Be sure to follow our story!
/ woods2table
/ woods2table
Actual performance (distance) will vary based on air pressure (psi) in the cannon, weight of the bait rig, angle of launch, the specific rod / reel / line attached, wind and ambient conditions. This stuff can get dangerous, so, build and use at your own risk! You need to use pressurized pvc and we recommend schedule 80. Be safe and have fun!
0:00 Intro
0:50 Building the Bait Cannon
12:15 Field Test! Shooting the Bait Cannon
16:33 Don't Forget to Like and Subscribe!
Parts and materials (about $60 for me)
(1) 30"x 4" diameter pvc pipe (air chamber; I used schedule 40 for all pvc parts, but would actually recommend you go heavier with schedule 80)
(1) 5' x 1.5" diameter pvc pipe (barrel)
(1) 3" x 2" diameter pvc pipe (lower assembly connector piece)
(1) 3.5" x 2" diameter pvc pipe (lower assembly connector piece)
(1) 2" diameter pvc ball valve (trigger mechanism)
(1) 4" to 2" diameter pvc step-down connector (connects air chamber to trigger mechanism)
(1) 2" to 1.5" diameter pvc step-down connector (connects trigger mechanism (ball valve) to barrel)
(1) 4" pvc end cap (air chamber cap)
(1) rubber air valve (.453" diameter rim hole / 2" length; I bought mine at Ace hardware)
medium grade PVC primer and PVC cement
1/2" drill bit
tape measure
pencil
chop saw or hack saw
extension cord
whatever paint / spray paint you want for your own design
bicycle pump or other air pump to fill the air chamber (make sure you have a pressure gauge to measure how much air you're inserting!)
drill
****************
*If you're also building the bait mold rack and bait molds*
(1) treated 2"x6"x4' lumber (bait mold holder)
(1) 5' 1.5" diameter pvc pipe (bait molds)
(5) 1.5" pvc pipe caps (caps for bait molds)
Refer to the 7:55-9:50 section of our first Bait Cannon video (link below) for these instructions
• How to Build a Bait Ca...
****************
I THINK this is everything required. Comment below if you have questions! Good luck out there and let us know if you catch a big one!
#MAXIMUMDISTANCEFORABAITCANNON #CHEAPBAITLAUNCHER #WOODS2TABLE

Опубликовано:

 

4 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 334   
@oobihdahboobeeboppah
@oobihdahboobeeboppah 2 года назад
Great build. Couple of suggestions: 1.) Instead of gluing the barrel or even using threaded fittings, simply drill through the barrel joint and put a snug fitting rod or nail through there. This will prevent your bait from slipping all the way through into the chamber and will allow you to disconnect the barrel at the end of the day. 2.) When cementing PVC, you should always give it a twist as you seat the pieces together. These will fuse in such a way that the melted PVC will create much better joined micro ridges between the fused pieces giving you a stronger bond. (Oh, and the music is way too loud. Any way to re-record it?)
@bartwitt864
@bartwitt864 3 года назад
I am a PIPE FITTER/PIPE WELDER by profession so take my advice and read the instructions on your primer.You will see that you are supposed to apply the glue while the primer is still wet so that the PVC is still soft and makes the pipe and fittings fuse like a weld.MUCH STRONGER.
@Woods2Table
@Woods2Table 3 года назад
BART WITT that’s great advice thank you Bart!
@smalltown89
@smalltown89 3 года назад
Being that you should definitely know more about this than me Bart, could you give me an idea of what to add to it to make it easier to hold. This looked like quite the chore for that guy to hold, with how long it is. Any idea for legs, or a grip, or handle, etc.? I have a few ideas but they all involve screwing something into the pipe, which would let air pressure out
@stewie831959
@stewie831959 3 года назад
@@smalltown89 I tweaked it a little and put valve stem in angled area in the 4 to 2 inch reducer. Not valve on end cap. I just set bottom on ground against side of foot and hold buy a tee I added to install pressure gauge then hold at a 45 degree angle and open valve. Also have a threaded barrel for for take down for easy transport. I wish I could include photos. Basically the same design but a few modifications. Ended up with about a four and half foot barrel so when in half I could get it in my car trunk easier.
@charlesivey8986
@charlesivey8986 3 года назад
Do you think abs cement would do the job?
@prowannab
@prowannab 2 года назад
Bart said it right, I'd like to add on these larger pipes sometimes it wants to pull itself off. So hold the fittings together for a few moments to let the glue adhere.
@carolynturner3003
@carolynturner3003 3 года назад
BIG BOYS & THEIR BIG TOYS! Fun to watch on the way to 275 yards!Great job, super informative, and looks like anybody can follow the steps & build one...especially LOVE your lovely assistant Mia)... PLUS a trip to the beach is required for final testing!! Two thumbs up👍👍
@Woods2Table
@Woods2Table 3 года назад
Yes a beach test is a must! We can’t wait.
@richardr611
@richardr611 3 года назад
Thank you for the time you put into making the cannon and video. I will be making one for my next trip to Long Beach WA and then for my trip to FL I will bring it with me. I like your suggestion about using a screw joint for safety. I think that I will also add a handle/brace point of some kind. Thanks again.
@Woods2Table
@Woods2Table 3 года назад
thank you very much and thank you for watching!
@dustinpeterson9947
@dustinpeterson9947 3 года назад
Awesome! I can’t wait to build one of these. I’ve watched a few videos on how to build one and this seems to be the most simple design for your average DIY’r. Thanks for the video!
@Woods2Table
@Woods2Table 3 года назад
Awesome thanks for the feedback! Circle back and let us know how it goes!!
@yuvalayash1692
@yuvalayash1692 2 года назад
Thank you. I just made one works great👍🏽
@Woods2Table
@Woods2Table 2 года назад
great to hear! thank you so much for watching and supporting the channel!
@brianfornario9506
@brianfornario9506 2 года назад
Hey bud thanks for that breakdown video I can’t wait to try and make one I live on cape cod so beach fishing is kinda tough because how shallow it is and hard to get to the fish but especially when the big stripers run in the canal and u can’t reach the raging schools this will absolutely change the game so much appreciation again for your time
@Woods2Table
@Woods2Table 2 года назад
Thank you so much Brian! Let us know how your build goes! Good luck and tight lines!
@chondrocartel4079
@chondrocartel4079 3 года назад
Just built my own following your video! Can't wait to try it out. In the description list you left off the 2in to 1.5in connector that the barrel goes into! Dude this is so freaking awesome lmao
@meldangovender2440
@meldangovender2440 3 года назад
Hi there could you possibly give me all the parts for assembly but in millimetre measurements for the parts required thanks 😊👍
@Woods2Table
@Woods2Table 3 года назад
Good call!! Its in the video, but not in the list! I'll add it. Thank you for watching - let us know how yours turns out!!
@enriquegudino6990
@enriquegudino6990 2 года назад
wonderful, cannon
@markcornell8162
@markcornell8162 2 года назад
Awesome! Thank you!
@Woods2Table
@Woods2Table 2 года назад
Thanks so much mark! Thank you for watching and commenting. We appreciate your support and hope you’ll stick around the channel!
@01beachdude
@01beachdude 3 года назад
Amazing Video, I cant wait to build one
@Woods2Table
@Woods2Table 3 года назад
thank you very much! awesome feedback, and thank you so much for supporting our channel! Let us know how your build goes.
@warymartinez6821
@warymartinez6821 3 года назад
So is it 4” to 2” or 4”x2” ?
@TexasFishinGal1
@TexasFishinGal1 3 года назад
That’s awesome!
@Woods2Table
@Woods2Table 3 года назад
thank you so much. And thank you for watching!
@eddieaguirre5902
@eddieaguirre5902 Год назад
😂You had my laughing so hard with your last one! .. Reminded me of something I'd do ... Gonna try it out ... thanks for the laugh and the idea! ... 🙂
@leochristopher5131
@leochristopher5131 3 года назад
Ur awesome I made it it really worked
@Woods2Table
@Woods2Table 3 года назад
So glad to hear it. Hope you enjoy it!
@jamminzippy
@jamminzippy 2 года назад
Great video, thank you! I'm going to put one together this week. Two tips, if you don't mind. If no one has mentioned it yet. Apply your pvc cement while the primer is still wet. Your bond will be much stronger and more air/water tight. Also, have you tried muriatic acid to get your pavers clean? You can get it at HD or Lowes. Try a very small section as a test first, but it should work well. The acid etches down below the surface. Clean the stain with full strength acid. Then you will want to do your whole patio with a diluted mixture for a uniform look. Instructions should be on the box and of course....You Tube will certainly have a video or two.
@Woods2Table
@Woods2Table 2 года назад
Thanks Vincent! We corrected the wet/dry primer in the next video but you're absolutely right. For the pavers, didn't try the acid but we were able to replace the pavers with some leftovers from the patio install. Thank you for watching and supporting the channel!!
@mbr3232
@mbr3232 2 года назад
Made the straight shooter, pumped it to 100psi.didnt use primer. Used rubber air valve on end cap, plastic 2in air valve after chamber. Only waited till glue was dry. 10min sitting w/ 100psi BLEW The shrader valve out one end and the 4in reducer on other. Primer is a must and maybe a brads air valve and screw nut type shrader valve
@LittleWookOutdoors
@LittleWookOutdoors 3 года назад
We may have to build one too! That is sweet!
@Woods2Table
@Woods2Table 3 года назад
Thanks! Yes you should try it - really easy and a ton of fun!
@LittleWookOutdoors
@LittleWookOutdoors 3 года назад
Woods2Table I think we will glue the tube to the base lol
@Woods2Table
@Woods2Table 3 года назад
I’d recommend it! Or try a threaded connection. Be careful because the length and weight of the barrel will really stress that small connection joint if you don’t support it.
@LittleWookOutdoors
@LittleWookOutdoors 3 года назад
Woods2Table noted! Thanks
@rayd.1568
@rayd.1568 2 года назад
Awesome video buddy, try flipping your bricks around to remove the stains
@angelsalinas7866
@angelsalinas7866 3 года назад
Love the video
@Woods2Table
@Woods2Table 3 года назад
Thank you Angel! We appreciate your support - thank you for watching and commenting!! Let us know how your build goes!
@MColtOutdoors
@MColtOutdoors 3 года назад
👍 just found this video. Great video!
@Woods2Table
@Woods2Table 3 года назад
thank you so much! and thank you for watching.
@mikestefanick7542
@mikestefanick7542 2 года назад
GREAT VIDEO! With the straight pipe try female adapter threaded on ball valve and male adapter threaded on the barrel. Since you don’t need air tight the threads won’t affect anything and you can unscrew the barrel for easy transport. Happy fishing!
@Woods2Table
@Woods2Table 2 года назад
Great suggestion. Thank you Mike!
@easyguitarlessonsgrandpaal9126
@easyguitarlessonsgrandpaal9126 2 года назад
Excellent Job, simplicity Rocks...all these other videos with legs, triggers and multiple 90 degree turns is for the birds. KISS!!! I built one and it worked like a champ, my fishing buddies love it and have asked me to built one for them as well.....not my gig.
@rexturner4615
@rexturner4615 3 года назад
When it came apart Reminded me of the time my granddad had a 8bore punt gun he told me to rest it on something and something ontop of it well i didn't and my shoulders were hurting for months lol great vid
@Woods2Table
@Woods2Table 3 года назад
LOL - ouch! Thank you for watching and commenting!
@thomasmonroe9344
@thomasmonroe9344 3 года назад
Finished my copy today. I bailed on the rubber valve stem you recommended as I could not get it to hold in the hole. Purchased a bolt-in stem and worked great. next step is to work on a better mold as using the standard PVC caps creates a lip that needs to thaw before you can release the ice.
@Woods2Table
@Woods2Table 3 года назад
cool - glad you're working on the design. I trim the overhanging lip with a filet knife which is very quick and easy, but would also like to have a mold that didn't require that.
@garyengland9267
@garyengland9267 2 года назад
You can fill the bottom with silicone or epoxy just past the lip
@joemeko6728
@joemeko6728 Год назад
Try 1-7/8 pvc chair leg floor protectors from Amazon the slide over the 1-1/2 “ pvc tube and have a built in stand for the bottom
@anacarolinarossinitartara2449
@anacarolinarossinitartara2449 2 года назад
muchas gracias por contestar
@outdoorfunforeveryone4659
@outdoorfunforeveryone4659 3 года назад
Awesome video again but that distance would overshoot the lake's I fish the first build is what I need to build but this build is definitely easier thanks again for the great info
@Woods2Table
@Woods2Table 3 года назад
thank you very much! You can always build one with a smaller air chamber or fill it to a lower PSI to shorten the distance, if the lake is big enough to use a cannon at all. Let us know how your build goes!
@tylerkerr8154
@tylerkerr8154 3 года назад
Building one of these right now following the straight line design. For the barrel I got a 2” male and female thread to thread the barrel on and off for better seal/ transportation. I’ll let you know how it comes out
@Woods2Table
@Woods2Table 3 года назад
awesome - hope you enjoy it!
@stewie831959
@stewie831959 3 года назад
Thanks for the video. Just built two ...one for me and one for co-worker. Made minor modification by using threaded barrel end and a threaded 1 1/2" ball valve. Reduced to 1 1/2 inch before valve with a 2" to 1 1/2 bushing. Added a tee with port for pressure gauge. Also drilled hole for valve stem in the the 4" to 2" reducer where it tapers towards the 2". I think it's better than in the end cap. I wish I could include photos. Not painted yet but it will be. Can send you pics if possible.
@Woods2Table
@Woods2Table 3 года назад
this sounds awesome! let us know how it works and we'd love to see pictures of your build. DM us on Instagram!
@fishmasterblaster4194
@fishmasterblaster4194 3 года назад
you got a video showing your cannon?
@watcher81
@watcher81 2 года назад
Would be keen to see this build mod on a vid build please
@i_am_wi11_
@i_am_wi11_ 9 месяцев назад
276! I’d be happy with just 200 or 150 lol! Man can’t wait to build one. You should make a video using a bead blaster
@roberthernandez3629
@roberthernandez3629 3 года назад
Hi, i like your ideas i made the second upgrade one but added 1 1/2 in. Female adapter to the 2 in. To 1 1/2 in. Reducer from the 2in. Valve . And the barrel i added a 1 1/2 in. Male adapter to screw in into the female adapter. Saw that you had trouble with the barrel with opening the valve. Hope i explained myself right lol. Just thought so when traveling you can unscrew it Thanks for the video like it.
@Woods2Table
@Woods2Table 3 года назад
great idea, glad it worked well for you. thank you for watching!
@stewie831959
@stewie831959 3 года назад
Did similar tweak on his design too. I added a tee with port for pressure gauge just before threaded 1 1/2" valve. Also drilled hole in 4 to 2 inch reducer for the valve stem...works great not being on the end..I just set end on ground against side of my foot and hold at a 45 then fire.
@user-hf9jx4yq2z
@user-hf9jx4yq2z 3 года назад
Great job... in the basket....
@Woods2Table
@Woods2Table 3 года назад
thank you!
@johndemarcantonio1287
@johndemarcantonio1287 2 года назад
What about putting an 1 1/2 reducer in right after the valve and then back up to 2 inch? Would this be to restrictive or would it help to boost the pressure in the 2 inch barrel. ??
@mikegiordano9445
@mikegiordano9445 2 года назад
You can also use lacquer thinner and a wire brush
@todds5956
@todds5956 Год назад
You could use a threaded valve stem too. Nut and rubber washer seals it. Hole doesn’t need to be prefect then
@charlesivey8986
@charlesivey8986 3 года назад
I made mine with a 36 inch air tank (4 inch schedule 40 pvc) with 4"-2" reducer, the 2 inch pvc ball valve and then a 50 inch long barrel that is 2 inch pvc. I pumped it up to 60lbs and shot a 1/2lb chunk of ice about 200 yards in the air. I wasnt expecting that at all but im gonna have some fun with it on the beach in outer banks north carolina in a few weeks.
@Woods2Table
@Woods2Table 3 года назад
That is awesome!! Let us know how the beach trip goes!! Thank you for watching and supporting our channel.
@charlesivey8986
@charlesivey8986 3 года назад
@@Woods2Table Sure will. Thanks for the instructional video. I meant to build the exact bait cannon but attention deficit disorder and instructional videos dont mix well making my projects not go as planned🤣🤣🤣. Mine works great though and i cant wait to get it on the beach.
@browdermc1303
@browdermc1303 2 года назад
Do you think you could put air valve in pipe instead of end to be out of the way?
@leithfranks3865
@leithfranks3865 2 года назад
could you put the tyre valve on the air tank instead of at the bottom?
@todds5956
@todds5956 Год назад
Do the reels ever tangle going out that fast?
@hathbenali
@hathbenali 3 месяца назад
I have a question. What if you put the bait without the mould. If you say it will not go far. I think using a Bread mould is quicker and you can do as many on the spot
@ynellirosas
@ynellirosas 3 года назад
saw your original video and was ready to make it.... then I saw this WOW! will the PVC cement hold the pressure? I felt like the back was going to pop open
@Woods2Table
@Woods2Table 3 года назад
I was shocked too the first time I made one. It seems to hold the pressure. You can also get heavy duty cement, but I've always used the medium grade with good results.
@ynellirosas
@ynellirosas 3 года назад
@@Woods2Table did you guys find a better way to pressurize? We fish from a pier and from shore, We’ve been using a bike pump since we don’t have access to electricity, looking for solutions because it’s exhausting to pump the psi to 100
@GreekOrthodoxVideo
@GreekOrthodoxVideo 3 года назад
This is freakin' awesome. Going to Lowes today to buy the supplies! Did you ever settle on an optimal barrel length? And did you have to use any type of adhesive on the rubber air valve when connecting to pic end cap? Can't wait to get this out on the OBX!
@Woods2Table
@Woods2Table 3 года назад
John Tsumas awesome - thank you very much for watching and let us know how it goes!
@Woods2Table
@Woods2Table 3 года назад
Optimal barrel length will take some testing and calculation, which we haven’t had time to do while getting ready for deer season. That will likely be in the next bait cannon video. We have used sealant in the past around the inside of the air valve but didn’t this time. Either way worked fine. Honestly didn’t think about it when building this one, but hasn’t been a problem. I’d still recommend doing it.
@GreekOrthodoxVideo
@GreekOrthodoxVideo 3 года назад
@@Woods2Table Thanks for the answers. One last question, for the 5ft barrel, could a threaded connector be used so that the barrel can be removed. Didn't know if air would leak out at the threaded joint if I did that. You are right, that sucker is long!
@Woods2Table
@Woods2Table 3 года назад
Threaded joint on the barrel would probably be fine because it’s past the ball valve, but don’t let that joint take the weight of the entire barrel or it might snap. Even when screwed in, try to support it.
@fishmasterblaster4194
@fishmasterblaster4194 3 года назад
@@GreekOrthodoxVideo I used threaded (you can get all parts in Sch 80) and use a brass ball valve. Its critical to have a fast action release and plastic doesnt offer that as well as it can crack. Ive interchanged 1.5 and 2 in ch barrels.
@unchartedcazaypesca6254
@unchartedcazaypesca6254 3 года назад
So how many psi can hold only 140 Great cannon. Great video. Please let me know. Fantastic video
@Woods2Table
@Woods2Table 3 года назад
There are charts online that list the max pressure for schedule 40 PVC, but be careful because most are talking about water rather than air pressure. Schedule 80 is stronger, and more expensive. I recommend using a moderate pressure to be on the safe side. Thank you for watching!
@samdominico2078
@samdominico2078 3 года назад
I have made your device and it works good. One issue tho. The ice slugs are breaking in half during my test launches. Any thoughts on how to keep them solid? Thank you!
@Woods2Table
@Woods2Table 3 года назад
Likely something to do with a) the freezing process or b) how you’re removing the bait from the mold tube. Make sure it’s getting completely frozen before attempting to remove, and be careful when extracting from the mold. Don’t bang or tap it on anything to loosen the ice. I put mine in the water to loosen it slightly and then gently press on the ice with a broom handle. Sometimes they still break, but generally they are broken when I put them into the barrel rather than breaking upon firing. Good luck and thank you for watching!!
@richardmcintyre6067
@richardmcintyre6067 3 года назад
First thank you both for taking the time to share your design . I am researching in hopes of making one . Your launcher is going to be my pattern but with one upgrade . The rubber schrader (tire) valve concerns me . It seems like a projectile ready pop . They make a heave duty steel valve that inserts from the back also however it has a steel flange that can't come out plus being steel it will last forever in a bait launcher . just thought I would throw in a nickel's worth of free advice . Good fishing and GOD bless
@Woods2Table
@Woods2Table 3 года назад
RICHARD MC INTYRE I looked at several steel valves but was concerned about the seal against the rounded cap. Please do let me know how this upgrade worked and if you’re happy with it, I’ll incorporate into future builds. Thank you for watching!!
@thomasmonroe9344
@thomasmonroe9344 3 года назад
This is what I used. recstuff.com/trailer-tires-wheels/wheel-accessories/valve-stems/high-pressure-bolt-in-metal-valve-stem-0-130-psi/
@fishmasterblaster4194
@fishmasterblaster4194 3 года назад
Did you get your build done? Any pics?
@richardmcintyre6067
@richardmcintyre6067 3 года назад
@@fishmasterblaster4194 due to awaiting a heart transplant most of my projects have been put on hold. I suggested the steel valve stems from using them for decades. They are mounted in curved surfaces and hold @ 1k.rpm with 120psi in extreme conditions. And for me personally the fact they can not become dislodged and turn in to a projectile as rubber valves can and have done before made them to me a safer upgrade for a few bucks. Thanks for asking
@richardmcintyre6067
@richardmcintyre6067 3 года назад
@@thomasmonroe9344 I had not seen this post or I would have thumbs-up 5mo. ago. The push-in rubber stems personally spook me for this type of application. For what it's worth I believe you made a safe choice. Good Luck and GOD bless
@andriadi6328
@andriadi6328 Год назад
Ofcourse I need this gun...but i don't know how i can ......?just👍👍👍👍from bali indonesia
@user-ql3eg6wv2v
@user-ql3eg6wv2v 3 года назад
Hi bro it is fantastic 👏 I have done the 1.5" cylinder cuz i could not find the 4"one for now but i don't know how many psi for the 1m ×1.5"×4mm cylinder. 🤔
@Woods2Table
@Woods2Table 3 года назад
I'm by no means an expert and would recommend you do your own research just to be safe BUT - looking at some schedule 40 psi ratings online, 1.5" is going to be stronger than 4" if the same thickness, ambient temperature, length etc. I'd also think you're going to need a lot of air if your cylinder and barrel are the same size (or close to it) and therefore hold a similar volume.
@user-ql3eg6wv2v
@user-ql3eg6wv2v 3 года назад
@@Woods2Table appreciate your reply bro. I have done some changes like I have putted 4 (4m ×1.5"×3mm ) 1 meter with 7 elbows, the pipe is class D H/P and the air is going in one direction from one edge then the trigger valve at the other end, and i compressed until 80 psi ant I am not sure if I can compress more or not. The pressure schedule said 12 Bar.🤔🤔 What do you think?
@thomasmonroe9344
@thomasmonroe9344 3 года назад
Additionally, my ball valve is a bit stiff to turn. Thinking of making a handle extension to provide more leverage for a full quick release of the pressure.
@Woods2Table
@Woods2Table 3 года назад
that'll work! let us know what you land on using.
@gunner49er
@gunner49er 3 года назад
Look at other cannon builds some use sprinkler valves that work like a trigger much better design
@chuckfreed282
@chuckfreed282 2 года назад
Good dea
@AlexMyersauthor
@AlexMyersauthor 3 года назад
Have you found a way to add air other than the hand pump? I have one of those cordless air inflators and just wondered if I could get the air pressure high enough? You caught any fish using this yet?
@Woods2Table
@Woods2Table 3 года назад
Alex Myers the hand pump is exhausting. We will be demonstrating another way in a subsequent video, likely an adapted scuba tank. The electric (or you really need battery for beach use) pumps I’ve seen look like they are underpowered for this and if they did get you to the right psi, would take too long. Stay tuned or if you find a solution you like, do let us know.
@Woods2Table
@Woods2Table 3 года назад
Alex Myers fish using our last air cannon, yes. This cannon no, not yet - we haven’t been back to the beach since we built it.
@anacarolinarossinitartara2449
@anacarolinarossinitartara2449 2 года назад
hola , cuanto de espesor tienen los caños , el de 4 pulgadas puede ser de 2,7 mm de espesor
@bobbywillis3567
@bobbywillis3567 Год назад
Sir, do you sell these?
@Tom-rh3pj
@Tom-rh3pj Год назад
Use a hose clamp to each piece and then use wire metal to tie to the clamps.. will keep the pieces together and can take apart
@LuisAngel-im1zx
@LuisAngel-im1zx 3 года назад
I have seen in other videos that the ice bullet makes the aerodynamic tip or it is similar to a bullet, you must perfect the bullet
@Woods2Table
@Woods2Table 3 года назад
good idea...we trim the tip down on ours with a filet knife before shooting, but if you know of a mold that will shape it for us, that would help!
@charlesivey8986
@charlesivey8986 3 года назад
Put a condom in your ice mold then fill it with bait and water to freeze. The tip will come to a point like you are wanting and it will be very easy to peel the condom right off of the bait.
@anacarolinarossinitartara2449
@anacarolinarossinitartara2449 2 года назад
que espesor deben tener los caños ?
@ericjohnson9193
@ericjohnson9193 3 года назад
How hard or easy is that pvc ball valve to turn and how is it holding up? Any cracking? I was debating using a brass ball valve but wanted your opinion if it’s ok. Thanks in advance
@Woods2Table
@Woods2Table 3 года назад
The 2” valve is fairly heavy duty. A bit difficult to turn at first but you can still do it quickly enough to prevent air loss. It’s also really durable and I haven’t noticed any cracks or leaks so far.
@fishmasterblaster4194
@fishmasterblaster4194 3 года назад
Brass all the way
@dwbearden
@dwbearden 5 месяцев назад
Put a union at the joint for disassembly.
@sarabellaj
@sarabellaj 2 года назад
You can buy silicone molds for large round ice cubes. Much more aerodynamic.
@Woods2Table
@Woods2Table 2 года назад
I might have to give this a try. Its a good idea. You'd have to find some that were a good fit for the barrel, but were also big enough to hold (at least most of) your bait rig.
@sycoticpsycho
@sycoticpsycho 2 года назад
Can you launch just a 2oz sinker and rig from this or does it need to have the ice molds?
@Woods2Table
@Woods2Table 2 года назад
You know, I’m not sure. You’re going to want at least a small length of ice mold to fill the barrel and provide something for the air to catch and push up the barrel, but I also wonder if it would be effective to put your rig on top of the ice in the barrel instead of inside the ice. The ice would act like wadding inside a musket or similar. I’m headed to the beach this week to test a new cannon (stay tuned for that one! It’s BIG), and I’ll try this out and let you know.
@perpeterson8892
@perpeterson8892 2 года назад
Can you build one for river fishing?
@Woods2Table
@Woods2Table 2 года назад
I’m interested in trying it. What do you suspect would be different - smaller / more portable?
@alanb76
@alanb76 3 года назад
The reducer shown here is clearly a drain rated fitting, not pressure rated. The endcap may also be a drain fitting. The pipe also appears to be thinner than pressure rated pipe. Look for pressure ratings printed on the pipe. Schedule 40 comes in both pressure and drain types. Use only pressure rated PVC and fittings for launchers. Be safe and happy launching.
@Woods2Table
@Woods2Table 3 года назад
great safety tips here, folks. Thank you Alan and thank you for watching!
@JettDiver1
@JettDiver1 Год назад
What would happen if you double walled the air chamber?
@i_am_wi11_
@i_am_wi11_ 9 месяцев назад
What if you make the mold pointy
@anacarolinarossinitartara2449
@anacarolinarossinitartara2449 2 года назад
por favor en milimetros ( mm ) que espesor tienen los caños , de la camara de aire
@carlosmatana3819
@carlosmatana3819 3 года назад
COULD SPECIFY TUBE MEASUREMENTS AND OTHER CONNECTIONS. THANKS!
@Woods2Table
@Woods2Table 3 года назад
Hi Carlos - you will be able to find a parts list in the video description. Thank you for watching!!
@pakmailmh4003
@pakmailmh4003 3 года назад
when the wind shot last,it sound strong?
@Woods2Table
@Woods2Table 3 года назад
very strong!
@cindymarkkidd6467
@cindymarkkidd6467 3 года назад
Love it, couldnt stop laughing! Did you loose any skin on your hand or leg?
@Woods2Table
@Woods2Table 3 года назад
that first shot with the new cannon left a mark! worth it!
@ILICKYOUSUCK
@ILICKYOUSUCK 3 года назад
@@Woods2Table Hello , would you ever build one and sell it ? And if you did , how much ? I live in Houston Texas , I like how you designed it .
@georgegonzalez881
@georgegonzalez881 3 года назад
One last question can you let me know or guide me on how to figure out how much Air would fit in the 5ft bottom since I built it longer than I should’ve. In other words how do you figure out how much air we put in it
@tylerkerr8154
@tylerkerr8154 3 года назад
George Gonzalez air volume can be calculated by the equation V=height*pi*radius^2 so if you used a 4” air tank the radius squared would be 4 and the length(height) would be 60” so the volume of your air tank would be ~753.98 cubic inches
@Woods2Table
@Woods2Table 3 года назад
Tyler nailed it. Thanks!
@Whitetail414
@Whitetail414 2 года назад
Perhaps I missed this answer… but what is the max pressure you can pressurize to if built exactly like this? More pressure seems to shoot farther… but when should you stop. Thanks.. and I sub’d
@Woods2Table
@Woods2Table 2 года назад
Actually, don't know. 4" schedule 40 pvc is rated to 220 psi, but that's not air pressure, its liquid. I haven't taken this particular build above ~140psi just to be safe. Just make sure you get the pressurized sch 40 and not DWV. Ideally, use schedule 80 pvc. Be safe out there, build and use at your own risk... However -- if you really want to know, we're about to test the limits - you'll see it in an upcoming video :)
@VictorHugoBoyLazoni
@VictorHugoBoyLazoni 2 года назад
great , how many shoots you could do?
@Woods2Table
@Woods2Table 2 года назад
I suppose its only limited by how much energy you have to keep pumping the cannon back up! A strong air compressor would make it unlimited.
@andrehusselmann4259
@andrehusselmann4259 2 года назад
Hi, do you think it is possible to use a air chaimber made of steel?
@Woods2Table
@Woods2Table 2 года назад
I think there are some on the market that do that. Sand Blaster is stainless steel. I just haven't built one that way.
@lancerudy9934
@lancerudy9934 Год назад
What kind of bait do you use?
@grante.7525
@grante.7525 Год назад
About how many pumps does it take?
@04gtosilver
@04gtosilver 2 года назад
Instead of the bicycle pump. Will a 12v air compressor work with pressure gauge?
@Woods2Table
@Woods2Table 2 года назад
it will work, but it depends on the pump and the max psi. I've had limited success with them so far, but more so because the pumps I had just weren't that strong.
@TightLinesFishin
@TightLinesFishin 2 года назад
What 4x2 reducer did you use? Pressurized or DWV?
@Woods2Table
@Woods2Table 2 года назад
Sched 40; pressurized but not the strongest. Really recommend sched 80 for all pressurized parts.
@Aimsport-video
@Aimsport-video Год назад
Nice video. Believe primer shouldn’t be allowed to dry.
@Woods2Table
@Woods2Table Год назад
Thank you! And you’re correct about the primer.
@gabriellara17
@gabriellara17 2 года назад
Have you come up with a different method to launch bait/hook/weight other than freezing?
@Woods2Table
@Woods2Table 2 года назад
Not yet. But we are testing a few methods this week! Stay tuned!
@Woods2Table
@Woods2Table 2 года назад
We just tested a few different methods. Check out our latest video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nqdvNeaof1w.html
@browdermc1303
@browdermc1303 2 года назад
How did you keep ice from being larger in end caps?
@Woods2Table
@Woods2Table 2 года назад
no way to, at least not with this setup. I keep a filet knife handy to shave down the extra ice on the end so it will fit down the barrel properly.
@joemeko6728
@joemeko6728 Год назад
Try 1-7/8 pvc leg protectors from Amazon works great no leaks and built in stand for freezing
@smalltown89
@smalltown89 3 года назад
Im curious, so I can weigh the pros and cons of the tire pump vs. the air compressor. I liked your design, because I can take it to the beach without needing power, or carrying an air compressor with me and having to worry about it running our of pressure mid fishing, but you seemed pretty winded in this video. How many pumps does it take you to get it to the desired PSI?
@Woods2Table
@Woods2Table 3 года назад
Way. Too. Many. It’s exhausting if you do it more than once. I’m working on another solution for another video soon. Open to your ideas if you land on something that works well!
@Woods2Table
@Woods2Table 3 года назад
I got an email that you'd commented asking about the list of parts, but I can't locate the comment to reply directly. You'll find the parts and materials list in the description of the video. Good luck with the build!
@smalltown89
@smalltown89 3 года назад
@@Woods2Table yeah I asked but right after I asked I saw them deep in the description, so I deleted my comment lol. Thanks though
@fishmasterblaster4194
@fishmasterblaster4194 3 года назад
@@Woods2Table compressor all the way. I got a deep cycle battery and though its a little effort to carry around, I can launch the cannon all day at the beach in fact for 2-3 days before I have to recharge the battery. Approx 60 launches off one charge. On top of that, I added some USB outlets to keep my phones charged lol.
@loganberlin8103
@loganberlin8103 2 года назад
What air compressor are you running? Never thought to use a deep cycle and this has been a pin for me!
@anacarolinarossinitartara2449
@anacarolinarossinitartara2449 2 года назад
necesito saber fundamentalmente el espesor de los caños ?
@bradmetcalf5333
@bradmetcalf5333 Год назад
any DIY project that makes grown men laugh like 12 year old boys has got to be good. Building mine tomorrow. Thanks Brother.
@andrehusselmann4259
@andrehusselmann4259 2 года назад
HI all,is it possible to make a air chaimber out of steel?
@Woods2Table
@Woods2Table 2 года назад
There are some out there that use steel. I haven't personally looked into how to make one. Check out the Sand Blaster.
@myoconnery8189
@myoconnery8189 3 года назад
im thinking a MK-19 replica swivel mount , im on it
@Woods2Table
@Woods2Table 3 года назад
now we're talkin! you'll have to send pictures of that.
@thurstonhornbuckle4716
@thurstonhornbuckle4716 Год назад
Did you ever try muriatic acid on the ectoplasm stain. If not and decide to, it will take everything off of it. I.E. dirt, grease, sealer, stain etc. to the point you will want/have to do the entire patio
@Woods2Table
@Woods2Table Год назад
Haven’t tried the acid….but we did have some extra bricks laying around that took care of this. Thank you for watching and commenting!
@elberttanner6189
@elberttanner6189 Год назад
Try cleaning the bricks with a wire brush and xylol.
@tempt9725
@tempt9725 3 года назад
Can you still shoot bait out of it and how? Also is it possible to use live bait to launch it out sea??
@Woods2Table
@Woods2Table 3 года назад
I don't think you could shoot bait that isn't first frozen into a solid mold that would be fairly airtight in the barrel. Live bait wouldn't work as you'd have to freeze it first. Let me know how your build goes!!
@tommymanyard3183
@tommymanyard3183 3 года назад
You should be able to flip those bricks right around and then spray it off with a light duty pressure washer so it's kind of the same color
@Woods2Table
@Woods2Table 3 года назад
Unfortunately, trust me they are STAINED. Very porous material, it soaked right in. Flipping them over didn't help as they were smooth on the bottom (rather than a tumbled texture) and a very different color (not due to dirt or aging). But, I did find some extras from our patio construction and happy to say, the problem is solved! Thank you for watching and commenting Tommy!
@wesjones5191
@wesjones5191 3 года назад
I used screw connectors to secure my barrel to the cannon
@Woods2Table
@Woods2Table 3 года назад
awesome - are you referring to a threaded pvc connector, or a different type? Can you send us a link or picture? Thanks Wes! And, we really appreciate you watching and commenting.
@xiaolan5167
@xiaolan5167 2 года назад
I want to ask, can I use this fishing machine in the San Francisco Bay Area, if I can wait until you answer, I would like to thank you very much
@Woods2Table
@Woods2Table 2 года назад
I am not sure. It can vary a lot from one area to another. Best to consult your local wildlife officer. I’ve found them to be very helpful.
@snewcomer22
@snewcomer22 3 года назад
Pro tip: flip the bricks over;)
@Woods2Table
@Woods2Table 3 года назад
Unfortunately, flipping them over didn't help as they are smooth on the bottom (rather than a tumbled texture, not matching the other pavers) and a very different color (not due to dirt or aging). But, I did find some extras from our patio construction and happy to say, the problem is solved! Thank you very much for watching and commenting! We really appreciate your support.
@johndemarcantonio1287
@johndemarcantonio1287 2 года назад
Watched a couple of these so far. Yes 4 inch. Everyone puts the schrader valve EXPOSED on the end all by its lonesome.. NOT protected at all. How about on the angle of the 3inch to 2 inch adapter? A bit more protected. Yes a threaded adapter on the barrel to transport easier. Like a shotgun.. you do not need a long barrel. 36 inches? ALL connections should be rotated till you cannot rotate it anymore. Plumbers do this all the time. YES you did a GREAT job on video. Just some observations from a senior. Thanks.. JohnnyD.
@carlostrevino1088
@carlostrevino1088 Год назад
Use thread couplings male & female, that way you can unscrew the barrel.
@cinco247
@cinco247 2 года назад
Had to go with 3 inch pressure rated pvc. Couldn't find 4inch with pressure rating. What is the max pressure for 3 inch at 30 inches?
@Woods2Table
@Woods2Table 2 года назад
There are tables online that will show the max pressure by size and schedule pvc. Just note those tables aren’t typically air pressure, believe they are water pressure. I just use them as an approximation. Re schedule 80 pvc - you can find most of what you need on usplastic.com
@angelsalinas7866
@angelsalinas7866 3 года назад
I'mma make me one but I'm going to use schedule 40 pipes so the cap fits tight
@Woods2Table
@Woods2Table 2 года назад
this was all schedule 40 PVC, but the seal wound up working out well. We're about to build one out of schedule 80, should be safer. thank you for watching and supporting our channel!
@mikerivera201
@mikerivera201 3 года назад
Would ABS be better ? Thank you
@Woods2Table
@Woods2Table 3 года назад
I'm really not sure, but I'll research it. Based on my initial read, each (ABS or PVC) has its pros and cons and it appears there are a lot of differences. I have to say I'm intrigued, and after reading more about it may try ABS in another build.
@fishmasterblaster4194
@fishmasterblaster4194 3 года назад
Pro plumbers told me ABS is way weaker. Sch 80 PVC if using plastic.
@mgfittipaldi
@mgfittipaldi 3 года назад
How much does the whole bait ball amunnition weighs?
@Woods2Table
@Woods2Table 3 года назад
Good question. I'm not exactly sure. It would depend on which sinker you choose (I typically use 3+ Oz, minimum) and how much liquid you add to the bait mold when freezing. Rough guess - and this is just a guess - I'd say the whole thing is 8-10oz but I could be wrong. Next time I'll weigh one.
@wildonbass
@wildonbass Год назад
Do you have a parts list?
@Woods2Table
@Woods2Table Год назад
Sure, the parts list is in the video description. Good luck!
@wildonbass
@wildonbass Год назад
Built one! Thanks so much! How long do you freeze the bait bullet?
@georgegonzalez881
@georgegonzalez881 3 года назад
What happens if inbuilt this model but build the bottom portion 5ft long instead of 30 inches ?
@Woods2Table
@Woods2Table 3 года назад
that's a lot of air! ultimately it would translate into more air behind your bait mold, and greater distance but you'd need a longer barrel to take advantage of it and it would take longer to pump up... glad you are making it your own and working to improve the design!
@mikegiordano9445
@mikegiordano9445 2 года назад
Braided cup brush on a right angle grinder will remove your stains
@chuckfreed282
@chuckfreed282 2 года назад
Why are the 2 inch pieces are different lengths?
@leo777lee
@leo777lee 3 года назад
what psi can you go up to
@Woods2Table
@Woods2Table 3 года назад
I've taken it to 145psi. Our pump gets really hard to pump past that, and I'm being careful with the Sched40 PVC. Be careful though...check for max recommended pressures online and try to use schedule 80 if you can. thank you for watching!
@ahmedmohamed9013
@ahmedmohamed9013 3 года назад
I am thinking of making a bullet made of silicone attached to a line So it will be reusable instead of the ice bullet because it is hard to transport ice What do you think
@Woods2Table
@Woods2Table 3 года назад
I'm not sure how that would work. The intent of the ice mold (which contains the bait rig) is that it melts when it hits the water, freeing your bait to sink to the bottom. But, great that you're making it your own and working on ways to improve the design!
@ahmedmohamed9013
@ahmedmohamed9013 3 года назад
@@Woods2Table The idea I am talking about is similar to the botatto bullet but instead of botatto it will be a mold made of silicone attached to a line and that line attached to either inside the cannon tube so when you fire it reach the end of the tube and stop or you can attach it to a rock or something that is far from you so it don't hit you back it will be safer to not make it go out the tube You no the bait once it exit the tube it will have the same speed even if the bullet didn't exit the tube i beleive This way the cannon will always be prepared you don't need to freeze stuff and it melts etc and you don't waste food and money of the botatto its cheap but still a waste You should try it i will give you the copy write so I see it will work or not lol it will be something never done in RU-vid I beleive untill now How to make the bullet take some inches of the same tube and paint it with some oil then put the silicone and a wire inside the silicone in a random way or attach it to a stick so it don't get released from the silicone under the pressure Don't let the bullet exit the tube it will hit you back If you are going to make it notify my so I will follow you
@thomasmonroe9344
@thomasmonroe9344 3 года назад
That has some merit as it would also act as a float. I just picture the bait flying behind it would impact distance.
@fishmasterblaster4194
@fishmasterblaster4194 3 года назад
@@ahmedmohamed9013 barrel wouldnt hold it. I tried it with a cork but the power is just way too much.
Далее
MAYOT - High
02:28
Просмотров 284 тыс.
Air Cannon (You don't have to throw your throwline)
11:52
TINY BAIT CANNON! Will it Work?! HOW FAR CAN IT CAST??
10:14
Pneumatic launcher (aka "Air Cannon")
22:39
Просмотров 13 тыс.
Have I Found the Fastest Air Cannon Valve??
9:50
Просмотров 417 тыс.
How To Make A Live Bait Well With A Cooler
37:18
Просмотров 38 тыс.
Family using home made bait launcher
6:03
Просмотров 141 тыс.
Air Cannon Build
9:01
Просмотров 270 тыс.
MAYOT - High
02:28
Просмотров 284 тыс.