USB Adapter Installation | Guide | Honda CB650R

Подписаться 564

Просмотров 34 тыс.

50% 1

Installation guide for a third-party USB adapter. This USB adapter from Interphone features 2 USB ports that support fast charging (5V 2A). This video shows in detail all the necessary steps to install this USB adapter without cutting any cables or doing any other permanent damage/changes to the motorcycle.
About the connector: After A LOT of research online, I found out a code (6188-0004) for the connector that fits in the motorcycle's accessories plug. After a lot of time and many refunds, I managed to buy a set of these connectors from AliExpress.
About the "creative" solution for connecting the USB adapter: This solution is not ideal, however, I've used it for a while without any problems as a temporary fix. If you want to connect the adapter like this, just make sure the wires don't touch and isolate everything carefully.
Any questions? Feel free to leave a comment, I'll reply as fast as I can.
Product link:
www.interphone...
Camera:
Cannon EOS 1300D | 1080p @ 24fps
Motorcycle:
Honda CB650R (2020 | Euro 4)
Accessories:
Puig levers 3.0 (short)
Barracuda sliders
Small windshield
Interphone USB adapter
GUB phone mount

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@rajivvishwa Год назад

Thank you. Followed the instructions here to install Just a usb charger on my 2023 CBR650R.

@ChillMotoRides Год назад

Hey Rajiv, Glad the video helped you, enjoy your CBR, I've also tested that model and it's a really cool bike 😅.

@vzn.furchi5779 Год назад

Hello, Good video. Why are you using an external Fuse? I think this cable is already protected by a fuse in the fuse box. Just as a tip for the next time. You can also change both of the connectors. So you dont have to order this special one. Very helpful video :)

@ChillMotoRides Год назад

Hey hey, First of all thank you for your comment, I am still learning and I really enjoy constructive comments to help me grow and better myself. Regarding the fuse, yes you are right. Looking at the wiring schematic I can see that the circuit is indeed fused. At the time I did not see that and also I didn’t want to cut the cables, if anyone else in the future wants to cut the cable and remove the fuse, it is safe to do so. Regarding the special connector, my main goal was to change as little as possible. I didn’t want to cut or remve the connector from the motorcycle so I tried to find a way to make it work with the OEM one. Glad you enjoyed the video, feel free to share more insights. Ride safe ✌️

@kiennguyen7653 2 года назад

This video is very useful for me. Thank you.

@ChillMotoRides Год назад

You're very welcome my dude, ride safe. ✌

@SobhanComedy 3 года назад

Thank you very much for this Video It helps very much!!

@ChillMotoRides 3 года назад

Glad I could help, ride safe ✌

@wave8889 Год назад

thank you for the research about the connector very helpfull :)

@ChillMotoRides Год назад

You're very welcome, I am honestly glad people find this as useful as I did. Thank you for your feedback too my man. Ride safe ✌

@diogogoncalves7581 3 года назад

nao existem lojas fisicas a vender este ripo de conectores?? Nao encontro

@ChillMotoRides 3 года назад

Boas Diogo, eu comprei esse conector pelo AliExpress, na descrição do video tens lá o link para o produto que eu comprei. Um conselho, paga aqueles 2 euritos e tal de portes porque se não nunca mais recebes a encomenda, tive de fazer 2 ou 3 refunds por causa dessa brincadeira 😒

@alemao051 6 месяцев назад

Olá tenho uma CBR 650r 2022 a ligação e igual a essa??

@ChillMotoRides 6 месяцев назад

Hey 👋, Opah penso que a versão de 2022 já venha com o carregador pré-instalado, acho que precisas só de um cabo USB-C, é uma questão de consultares o manual para confirmar. De qualquer forma, se não vier ou se por algum motivo quiseres intalar a tomada 12V na mesma, não te consigo garantir (nunca trabalhei nessa mota) mas o mais provável é a ligação ser a mesma. Espero ter ajudado 😅

@pedromcruz 3 года назад

Quando eu comprar a minha tens de me ajudar ! Grande edição! Abraço.

@ChillMotoRides 3 года назад

Muito obrigado pelo comentário. No video penso estarem detalhados todos os passos necessários para instalar o carregador USB, mas sim, qualquer dúvida deixa aí um comentário e eu ajudarei no que souber 😁 Boas curvas e parabéns pela aquisição já agora. É mesmo uma máquina fantástica.

@pedromcruz 3 года назад

@@ChillMotoRides tenho uma NC mas essa mota está muito equilibrada e muito louca !

@ChillMotoRides 3 года назад

Pois, é uma máquina bastante diferente da NC, é bastante mais desportiva. O motor de 4 cilindros tem uma suavidade incrível, esta é a minha primeira mota, não tinha qualquer experiência anterior e consegui-me adaptar muito bem. Anda muito bem mas nunca assusta, é mesmo uma mota que só anda o que anda o que o condutor quiser.

@alanspence1716 2 года назад

Great video, thank you. Do you think the process for the CB125R would be the same?

@ChillMotoRides 2 года назад

Hey Alan, I can't say for sure but as long as your motorcycle has the same accessories connector, the installation process should be fairly similar. If you manage to do it, or just try it, let me know. I hope I could help, ride safe ✌

@amen6846 5 месяцев назад

Hello. To which cable did you connect the red and black from the connector? Because the colours are not matching on the obd connector.

@ChillMotoRides 5 месяцев назад

Hey. I don't really remember the colors but if you look closely on how I installed the wires in the connector, you can't go wrong since it only connects one way. Also, I should note that the connector on the bike I am using in this video is not the OBD connector, it is a connector specially made for accessories such as a USB charger 😁.

@johntheaccountant5594 Год назад

There are two sets of connectors in the protection boot. One seems to have 4 cables and one seems to have 8 connectors. Is the 8 connector the diagnosis connector? You are only using two (switched positive and negative I assume) on a pack of 4. What are the purpose of the other two wires?

@ChillMotoRides Год назад

Hey John, honestly I cannot help you here. I know that the connector I use is used as an accessories plug, so I used that one. After some research and testing I found out that those two wires are indeed (and as you said) the switched positive and the negative. That's what I needed to know so I didn't do a lot more research on the rest of the wiring. Sorry if I wasn't super helpful but if I find anything else of note I'll let you know.

@johntheaccountant5594 Год назад

@@ChillMotoRides Thanks anyway for replying.

@fabiojalmeida 3 года назад

Não há necessidade de desligar a carga negativa da bateria para fazer esta ligação?

@ChillMotoRides 2 года назад

Neste caso não porque este conector só tem corrente quando a ignição está ligada. ✌

@fabiojalmeida 2 года назад

@@ChillMotoRides obrigado pelo resposta!

@ChillMotoRides 2 года назад

@@fabiojalmeida Sem problema, boas curvas ✌

@MrDilmister 2 года назад

Hi. Does this power on only on ignition? Or power all the time? What's the power output for this port? TIA.

@ChillMotoRides 2 года назад

The charger only draws power when the ignition is on. In the beginning of the video I have a little clip showing this feature. I hope this helps you ✌

@ChillMotoRides 2 года назад

Also, the power output is 5V 2A

@carlossuafei9287 3 года назад

Hola amigo. Que aparato usb has usado? Tienes link? Gracias y sigue así de bien.

@ChillMotoRides 3 года назад

Hello, my Spanish is not that good so I'll write in English, sorry about that 😁. I bought mine at my local Honda dealer but here's a link to the official product page: www.interphone.com/en-it/Accessories/Charge-and-utility/HANDLEBAR-MOUNTED-DOUBLE-USB-PORT/p/ACCMOTO2USB I hope this helps

@carlossuafei9287 3 года назад

@@ChillMotoRides Sorry, I thought youtube translated. Thank you.

@ChillMotoRides 3 года назад

@@carlossuafei9287 No worries man, good luck ✌

@carlossuafei9287 3 года назад

@@ChillMotoRides I just put the usb and everything is perfect and very easy with the original connector of the motorcycle. Thank you!!! if anyone is interested i use this: connector: es.aliexpress.com/item/4001100485016.html?spm=a2g0s.9042311.0.0.3de663c03FuEaf usb: es.aliexpress.com/item/4000986593974.html?spm=a2g0s.9042311.0.0.3de663c03FuEaf

@ChillMotoRides 3 года назад

Hey man, really glad I could help you 😁 Enjoy the adapter and most importantly, enjoy your motorcycle. Ride safe ✌💪

@reprocoke 2 года назад

Hi, great video. Do you know if it can also be put on the 8-pin connector and not on the 4-pin?

@ChillMotoRides 2 года назад

Hey. I can't help you there, I know the 4 pin connector works and so I didn't look for any other alternatives. Sorry man 😔

@reprocoke 2 года назад

@@ChillMotoRides haha, okey. Don't worry, thanks for the help. 🥲

@francisho3056 2 года назад

What is the USB cable length you used while installing?

@ChillMotoRides 2 года назад

Hey, it was a while back I might not be remembering correctly but I think it was 1.5m. I hope this helps you ✌

@SMGMP7A1 4 месяца назад

Where did you get the connector?

@ChillMotoRides 3 месяца назад

Hey, I bought mine from AliExpress, in the video description you can find the connector reference, search for it in their website, shouldn't be too hard do find.

@SMGMP7A1 3 месяца назад

@@ChillMotoRides That is awesome thank you! Great vid by the way! Keep up the good work

@sergiomunoz2424 Год назад

What's the 12v socket? Could you send me link? Thank you

@ChillMotoRides Год назад

Hey man, I bought this 12v charger at my local Honda dealer however you can find it (or a similar one) in almost any motorcycle store. Here is the official product link for this specific charger (also updated the video description), I hope it helps, any other questions, feel free to ask: www.interphone.com/en-gb/Accessories/Charge-and-utility/HANDLEBAR-MOUNTED-DOUBLE-USB-PORT/p/ACCMOTO2USB

@sergiomunoz2424 Год назад

@@ChillMotoRides thank you. Now I am triying to make the connector, how do you know what hole is + and -?? I have the same conector with 4 holes

@ChillMotoRides Год назад

@@sergiomunoz2424 So the charger I used only needs 2 cables, those are the positive and negative. The motorcycle does have 4 terminals available but you won't need 2 of them. Looking at the wiring schematic, you'll need the terminal that connects to the solid purple cable (switched hot (+)) and the terminal that connects to the solid green cable (ground (-)). I hope this helps.

@sergiomunoz2424 Год назад

Thank you!!! Very usefull your help

@ilmiticogiova 3 года назад

WRONG CONNECTOR for MY21

@ChillMotoRides 3 года назад

What do you mean? If you mean that the connector is not the same for the 2021 version, I think that version already comes with a USB adapter installed if I am not mistaken.

@ilmiticogiova 3 года назад

@@ChillMotoRides yes you're right, it already has a USB c plug but I'd like to connect anyway a wireless charger support for the smartphone to the same plug you used in the video as it has 12v input

@vtaqz4809 2 года назад

Why is this necessary? Honda advertises that there is a USB port under the seat?

@ChillMotoRides 2 года назад

Yes indeed, the new 2021 models now come standard with a USB socket under the seat, although this is not the case for older models such as my 2019 Honda CB650R.

@hexwavemusic 2 года назад

The USB port on the 2021/2022 is also only for European models apparently, Canadian and I believe American bikes don't have them because screw us I guess 🙂

@manuel_13 10 месяцев назад

never, NEVER put a cable under the tank like this, alwaishold it to frame

@ChillMotoRides 10 месяцев назад

Hey, The cable has very little slack and if you look closer, you'll see that it's not being routed through any dangerous areas of the engine. I've been using a cable like this since before the video came out (also installed it like this on another bike) and there were no issues with it. I've even swapped the cable later for a newer one and after inpecting the old cable, there were no signs of any kind of damage on it. With this said, if you (or any other viewer) are still worried about the cable positioning, I guess there is no harm in using some zip ties to hold the cable to the frame. Thank you for your comment and ride safe ✌