Use These Tips To SOLDER FPV Drones PERFECTLY

Подписаться 2 тыс.

Просмотров 1,2 тыс.

50% 1

In this video we discuss the things you need to know if you want to have perfect solder joints. Creating the perfect solder joints consists of choosing the right solder mixture, ensuring your soldering iron is set to the correct temperature and using the right-sized tip; you will also need to use flux and this is likely the most important secret of perfect solder joints.
➡️ Check Out Our Store - volaertus.com/
How to solder
How to solder better
Bad soldering
Soldering skills
flux
rosin
63 37 solder
60 40 solder
50 50 solder
what is soldering
solder not melting
bridged solder joints
#solder #howto

Хобби

Опубликовано:

9 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@volaertus 4 месяца назад

Save BIG At volaertus.com/

@jaydoe4561 Месяц назад

good vid homie

@rickm1283 9 месяцев назад

Great no non-sense video. I've been soldering for a bout 6 years ( a FPV must learn skill) Great refresher video. Thanks!

@volaertus 9 месяцев назад

Glad it helped and thanks for the feedback! Soldering is definitely painful without flux

@johnhanley9946 29 дней назад

If the pads are cleaned with a little isopropyl alcohol, I think you can tin them without adding flux because the solder has flux in it. Flux seems more necessary when you're soldering wires to the pads, because then you're not adding more solder.

@Extrovert_space460 9 месяцев назад

Thanks for the info ❤

@volaertus 9 месяцев назад

Glad it helped!

@daviddraper6809 9 месяцев назад

Solder flows usually between 350-425C which is 600-700ish F

@volaertus 9 месяцев назад

Yes, I would have added a > to the 400 because the melting point, or when it begins to melt, is around there for 63/37 but to get it fully liquid a person would need higher temps. >400 Fahrenheit but 400 is a good starting point. Melt point: 183°C (361°F)