Using a $90,000 Scanner to Scan My Airplanes!

Подписаться 23 тыс.

Просмотров 4,8 тыс.

50% 1

We used a $90,000 laser scanner to scan my Cruzer and Super Duty airplanes. Why? Because now we can offer all of the fairings I made for the Cruzer and SD on the KitplaneEnthusiast.com website for all of you.
These fairings will look great on your airplane and surely get you a 100kts or more in extra speed!
Fairings, Seats, and Hoses- ORDER HERE:
www.KitplaneEnthusiast.com
OTHER PRODUCTS I'VE USED AND RECOMMEND:
WINDOW GLUE/SEALANT: amzn.to/3Zbw5rX
FLUTING PLIERS: amzn.to/3FNgcQQ
MY FLUTING PLIERS: www.aircraft-tool.com/shop/de...
HOLE FINDING TOOLS: amzn.to/3WK1lwC
ICING Polyester putty: amzn.to/3DZhXZY
Hobby Saw: amzn.to/3TCOdXs
3/8" reamer: amzn.to/38Dxth2
USB Charger: amzn.to/2VWxBSB
Park Brake Clamp: www.aircraftspruce.com/catalo...
Dynon D3: dynonavionics.com/pocket-pane...
Tape: amzn.to/2TzU32s
Adel Clamps: amzn.to/3ztVsI0
Snap Bushing (you NEED these): amzn.to/3gryDfm
Dremel Flap Wheel: amzn.to/3ztmXle
Air Hose: amzn.to/3wrqezA
Air Hose Fittings: amzn.to/3iIf2dB
Paint Gun (works GREAT for smaller parts): amzn.to/3vqDgMa
Air Filter for Paint Gun: amzn.to/3iHhfX2
USB Data Port (for Dynon): amzn.to/3iLsiOL
My Microphone: amzn.to/35likMa
Paint Mix Cups: amzn.to/2RSM4gc
Fly Cutter (for fuel sender): amzn.to/3gvgXzO
#laser #scanner #aircraft

Развлечения

Опубликовано:

19 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@wareairaviationservicesllc4933 11 месяцев назад

The whole video when the scanner was sitting on the table and was screaming at the screen, "Lay that thing down!" so it does get knocked off the table!

@aviationled_mmix 10 месяцев назад

First came across laser scanning back in 2008. Utterly blew my mind as a professional aircraft designer using Dassault Systems “CATIA” software to create aircraft surfaces. A lot of work was required to smooth out the point cloud created back then but 15 years on, all of that appears to be done in real time and the resulting tolerance is mind boggling ( 😮 9/10,000 th of an inch). Thanks for posting 🙏 … truly amazing stuff to see it being applied practically in experimental & LSA in 2023 👏

@rileysmith8980 11 месяцев назад

Very nice. Great value to the Zenith community.

@davidmullet1030 11 месяцев назад

Interesting how the scanner works I would think a finished product would save a lot of hours.Just for your information I have never met Mike and am not related even though we are both Mullets.

@CanadaManEg 11 месяцев назад

Excellent work and Video as usual Mark. Great to see your channel and your work excelling. Why don't you offer building lessons, build assist and flying lessons as well? 👍👍

@KitplaneEnthusiast 11 месяцев назад

Because I need to make enough money to live.

@CanadaManEg 6 месяцев назад

@@KitplaneEnthusiast You have enough credit to charge reasonably for building lessons as well as build assist capability. 🙂

@rumingjiang69 9 месяцев назад

Does it scan transparent parts like the windshield also?

@simitarknut2201 11 месяцев назад

How about sharing the scans of the Cruzer with Horizon Hobby so they can sell RC models of it.

@samuelarnold-vu2cv 11 месяцев назад

Yes!!!!

@scottmiller4711 11 месяцев назад

How long do you think it will be before you have them for sale?

@KitplaneEnthusiast 11 месяцев назад

We should have the upper windshield fairings and the wing fairings for the cruzer at the Zenith fly-in.

@davidrobins4025 11 месяцев назад

That would have been fascinating to watch while they did their thing. Amazing.

@wb6anp 11 месяцев назад

too bad there was no Stol there, so they could scan for a faring under the horizontal, to close the big open area.

@KitplaneEnthusiast 11 месяцев назад

Actually Mark Seaver is planning to extend the STOL aft fairing to go all the way back and close that gap.

@yurimig253 11 месяцев назад

The faa should scan all aircraft before certification... Would be a great idea for Data vi long haul...

@Sometungsten 11 месяцев назад

Scanning every new aircraft to see if it deviates from some sort of master scan might be helpful to the manufacturer, but I do NOT think the FAA or any other government entity should be involved. As far as I know, manufacturers of Part 121 aircraft already use lasers during construction (alignment / positioning) which probably serves much of the same purpose. The practice of laser (image) scanning an entire aircraft may lead to new discoveries during post construction QA. I would like to think that the major builders already do it. Side Note ... For a while, Lufthansa was trying to rebuild a Super Connie at a local airport. An article in the local paper said that they used lasers every morning.

@yurimig253 11 месяцев назад

@@Sometungsten I disagree. If AI were allowed to examine every image against one another, it could find my new discrepancies like wire run through the aircraft or other factors densities of metal you name it temperatures at which it was assembled. Could indicate preposition for multiples of factors to take place. Good or bad but that is why I call it data. B